[SOLVED] Broadcom 4312 Chipset

[SOLVED] Broadcom 4312 Chipset

Postby Garthhh » Jun 25th, '12, 17:31

hp pavillion dv4
running ubun 10.10 at present

when I run M2 from a live cd on a usb stick
I'm trying to work out a wireless connection
this is what I'm using now
Screenshot-10.png
Screenshot-10.png (242.64 KiB) Viewed 3332 times


I tried enabling the non free & tainted
what am I looking for on MCC?
I see this thread
viewtopic.php?f=25&t=2801
but this
broadcom-wl-5.100.82.112-4.mga2.nonfree
returns no results?
Last edited by Garthhh on Jul 4th, '12, 23:57, edited 1 time in total.
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby doktor5000 » Jun 25th, '12, 22:02

Garthhh wrote:what am I looking for on MCC?
I see this thread
viewtopic.php?f=25&t=2801
but this
broadcom-wl-5.100.82.112-4.mga2.nonfree
returns no results?


Where does it return no results? Also you should only search for the package name, broadcom-wl in this case
You did set the filter from "Programs with GUI" to "All" before searching?
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 15009
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: broadcom 4312 chipset

Postby Garthhh » Jun 26th, '12, 17:24

the sofware manager results for broadcom-wl are:
broadcom-wl-kernel-3.3.6-desktop-2.mga2 - broadcom-wl driver for kernel-desktop-3.3.6-2.mga2​
Prebuilt dkms binary kernel modules for the broadcom-wl driver version 5.100.82.112 built for kernel-desktop-3.3.6-2.mga2.
snapshot1.png
snapshot1.png (264.52 KiB) Viewed 3318 times

I can see the wireless, but no joy
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby Garthhh » Jun 28th, '12, 17:22

the configure media sources isn't real clear to me
which of this stuff should I enable?
snapshot1.png
snapshot1.png (310.25 KiB) Viewed 3305 times
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby Garthhh » Jun 29th, '12, 19:01

OK no responses

I would like to figure out how to get the wireless to work on this note book live before I do a proper install
what is my 1st step?
[I have a cat5 connection handy for troubleshooting]
there is a dizzingly large array of choices of media sources, which one(s) do I need to enable?
or is there part of the configuring of the wireless connection, that needs attention?
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby martinw » Jun 30th, '12, 10:45

The repositories you need to enable are:
  • Core Release
  • Core Updates
  • Nonfree Release
  • Nonfree Updates
If you live in a country where software patents are not valid (or just don't care about legal issues), you can also enable:
  • Tainted Release
  • Tainted Updated
There aren't any backports at the moment, so no need to enable those repositories. You would only want to enable the Debug and Testing repositories if you are working with one of the developers to test a new package or track down the cause of a bug - i.e. only enable these repositories if a developer asks you to, and disable them again when you are finished.
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Re: broadcom 4312 chipset

Postby martinw » Jun 30th, '12, 11:06

Regarding your original problem, the screenshot of the Network Centre shows that the Broadcom driver is installed and working - it has discovered an access point with the SSID STI-30274 (I presume is your access point, yes?). So the problem is that it is not making the connection. Despite your sig, I don't know how to help you without you using a terminal ;-) In a terminal window, please type
Code: Select all
dmesg > dmesg.log

and attach the resulting dmesg.log file here. This should provide some clues as to where the fault lies.

P.S. One likely cause of your problems is that, by default, Mageia starts two competing programs to manage your wireless connection, the Mageia net applet and NetworkManager. Can you also type:
Code: Select all
ps -ef | grep -v grep | grep -i net

in a terminal window, and report the results (in a code block) here.
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Re: broadcom 4312 chipset

Postby Garthhh » Jun 30th, '12, 17:17

my sig is an expression of my frustration, that in spite of the multitude of gui tools, most experts will revert to solutions that involve terminal as the primary tool, ignoring all the hardwork involved in developing a user friendly distro
I do understand that there are many ways to craft solutions & sometimes there is just no substitute but to pop the hood & fiddle around with the guts

dmesg > dmesg.log
yields no results,
what am I missing?

Code: Select all
[live@localhost ~]$ dmesg > dmesg.log
[live@localhost ~]$ ps -ef | grep -v grep | grep -i net
root        14     2  0 10:19 ?        00:00:00 [netns]
live      2506  2142  0 10:21 ?        00:00:08 /usr/bin/perl /usr/bin/net_applet


I enable the repositories as directed & updated before the above
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby martinw » Jun 30th, '12, 19:03

Garthhh wrote:my sig is an expression of my frustration, that in spite of the multitude of gui tools, most experts will revert to solutions that involve terminal as the primary tool, ignoring all the hardwork involved in developing a user friendly distro
I do understand that there are many ways to craft solutions & sometimes there is just no substitute but to pop the hood & fiddle around with the guts

Your analogy is a good one. If your car won't start, you wouldn't expect the mechanic to fix the problem without opening the hood, would you?
dmesg > dmesg.log
yields no results,
what am I missing?

The "> dmesg.log" part causes the output of "dmesg" to be stored in a file called "dmesg.log". If you've not executed any other commands in that terminal, I would expect it to be stored in your home directory, but typing
Code: Select all
pwd

will tell you for sure.

Alternatively you can just type
Code: Select all
dmesg

and copy and paste the output - but there will be quite a lot of lines of output.
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Re: broadcom 4312 chipset

Postby Garthhh » Jul 1st, '12, 01:10

the output of
dmesg
is truncated, [there's some rule about the max size visible]
output of
dmesg > dmesg.log
is also too large to post being some 8000 characters over the limit here
any hints as to which lines you are looking for?

problem with the popping of the hood analogy is:
the airshocks need topping off & there is already an on board compressor
the terminal is the equivelent of running a hotwire from the battery to the compressor, when there is a perfectly good control knob, if only I knew where :D
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby martinw » Jul 1st, '12, 12:21

Did you try using the "Upload attachment" tab to attach the dmesg.log file? Although there is a file size limit for attachments, I think it is quite large. You could reduce the file size by compressing it, e.g.
Code: Select all
gzip dmesg.log

will produce a compressed file called dmesg.log.gz.

Alternatively,
Code: Select all
grep eth dmesg.log
grep wl dmesg.log

should find the information I'm interested in.
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Re: broadcom 4312 chipset

Postby Garthhh » Jul 1st, '12, 15:42

resuits of the alternate method
[live@localhost ~]$ grep wl dmesg.log
grep: dmesg.log: No such file or directory
[live@localhost ~]$ grep eth dmesg.log
grep: dmesg.log: No such file or directory
[live@localhost ~]$
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby Garthhh » Jul 1st, '12, 15:49

there more than one way to get there from here
splitting the file up will do
Here's the 1st 1/2

Code: Select all
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.6-desktop-2.mga2 (iurt@jonund.mageia.org) (gcc version 4.6.3 (GCC) ) #1 SMP Thu May 17 16:25:59 UTC 2012
[    0.000000] Command line: automatic=method:cdrom initrd=/boot/cdrom/initrd.gz root=mgalive:LABEL=Mageia-2-KDE4-LiveCD splash quiet rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=788
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afd70000 (usable)
[    0.000000]  BIOS-e820: 00000000afd70000 - 00000000afdbf000 (reserved)
[    0.000000]  BIOS-e820: 00000000afdbf000 - 00000000afe58000 (usable)
[    0.000000]  BIOS-e820: 00000000afe58000 - 00000000afebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000afebf000 - 00000000afeec000 (usable)
[    0.000000]  BIOS-e820: 00000000afeec000 - 00000000afeff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv4 Notebook PC/30FB, BIOS F.33 11/02/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FFF00000 mask FFFFF00000 write-protect
[    0.000000]   1 base 0000000000 mask FF80000000 write-back
[    0.000000]   2 base 0080000000 mask FFE0000000 write-back
[    0.000000]   3 base 00A0000000 mask FFF0000000 write-back
[    0.000000]   4 base 0100000000 mask FFC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[    0.000000]  0000000000 - 00afe00000 page 2M
[    0.000000]  00afe00000 - 00aff00000 page 4k
[    0.000000] kernel direct mapping tables up to aff00000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ afee6000-afeec000
[    0.000000] RAMDISK: 7f6e4000 - 80000000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000afefe120 0005C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 00000000afefd000 000F4 (v04 HP     REPLEY   00000003 LOHR 01000013)
[    0.000000] ACPI: DSDT 00000000afeef000 0A15F (v01 HP     REPLEY   F0000000 LOHR 01000013)
[    0.000000] ACPI: FACS 00000000afe61000 00040
[    0.000000] ACPI: HPET 00000000afefc000 00038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: APIC 00000000afefb000 00084 (v02 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: MCFG 00000000afefa000 0003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: BOOT 00000000afeee000 00028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: SLIC 00000000afeed000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: SSDT 00000000afeec000 00386 (v01 AMD    PowerNow 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000afd70
[    0.000000]     0: 0x000afdbf -> 0x000afe58
[    0.000000]     0: 0x000afebf -> 0x000afeec
[    0.000000]     0: 0x000afeff -> 0x000aff00
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 982470
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 700023 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000afd70000 - 00000000afdbf000
[    0.000000] PM: Registered nosave memory: 00000000afe58000 - 00000000afebf000
[    0.000000] PM: Registered nosave memory: 00000000afeec000 - 00000000afeff000
[    0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e1000000
[    0.000000] PM: Registered nosave memory: 00000000e1000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81344 r8192 d21056 u524288
[    0.000000] pcpu-alloc: s81344 r8192 d21056 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 961985
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: automatic=method:cdrom initrd=/boot/cdrom/initrd.gz root=mgalive:LABEL=Mageia-2-KDE4-LiveCD splash quiet rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=788
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3779756k/5242880k available (4465k kernel code, 1313000k absent, 150124k reserved, 6415k data, 744k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2099.990 MHz processor.
[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.98 BogoMIPS (lpj=2099990)
[    0.001009] pid_max: default: 32768 minimum: 301
[    0.001039] Security Framework initialized
[    0.001053] TOMOYO Linux initialized
[    0.001508] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004529] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005805] Mount-cache hash table entries: 256
[    0.006007] Initializing cgroup subsys cpuacct
[    0.006010] Initializing cgroup subsys devices
[    0.006012] Initializing cgroup subsys freezer
[    0.006015] Initializing cgroup subsys net_cls
[    0.006017] Initializing cgroup subsys blkio
[    0.006056] tseg: 00aff00000
[    0.006058] CPU: Physical Processor ID: 0
[    0.006060] CPU: Processor Core ID: 0
[    0.006063] mce: CPU supports 5 MCE banks
[    0.007304] ACPI: Checking initramfs for custom DSDT
[    0.782996] ACPI: Core revision 20120111
[    0.787900] ftrace: allocating 17207 entries in 68 pages
[    0.794427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.804680] CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-72 stepping 01
[    0.804886] Performance Events: AMD PMU driver.
[    0.804886] ... version:                0
[    0.804886] ... bit width:              48
[    0.804886] ... generic registers:      4
[    0.804886] ... value mask:             0000ffffffffffff
[    0.804886] ... max period:             00007fffffffffff
[    0.804886] ... fixed-purpose events:   0
[    0.804886] ... event mask:             000000000000000f
[    0.804886] MCE: In-kernel MCE decoding enabled.
[    0.804886] Booting Node   0, Processors  #1
[    0.804886] smpboot cpu 1: start_ip = 9a000
[    0.815884] TSC synchronization [CPU#0 -> CPU#1]:
[    0.815884] Measured 204505272 cycles TSC warp between CPUs, turning off TSC clock.
[    0.815884] Marking TSC unstable due to check_tsc_sync_source failed
[    0.815897] Brought up 2 CPUs
[    0.815900] Total of 2 processors activated (8399.96 BogoMIPS).
[    0.817006] devtmpfs: initialized
[    0.818918] PM: Registering ACPI NVS region at afe58000 (421888 bytes)
[    0.820553] RTC time: 13:26:58, date: 07/01/12
[    0.820607] NET: Registered protocol family 16
[    0.820777] TOM: 00000000c0000000 aka 3072M
[    0.820782] Fam 10h mmconf [mem 0xe0000000-0xe0ffffff]
[    0.820790] TOM2: 0000000140000000 aka 5120M
[    0.820956] ACPI: bus type pci registered
[    0.821062] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xe0000000-0xe0ffffff] (base 0xe0000000)
[    0.821066] PCI: MMCONFIG at [mem 0xe0000000-0xe0ffffff] reserved in E820
[    0.823409] PCI: Using configuration type 1 for base access
[    0.823924] bio: create slab <bio-0> at 0
[    0.824025] ACPI: Added _OSI(Module Device)
[    0.824028] ACPI: Added _OSI(Processor Device)
[    0.824030] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.824032] ACPI: Added _OSI(Processor Aggregator Device)
[    0.824899] ACPI: EC: Look up EC in DSDT
[    0.826500] ACPI: Executed 1 blocks of module-level executable AML code
[    0.828279] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.850936] ACPI: Interpreter enabled
[    0.850942] ACPI: (supports S0 S3 S4 S5)
[    0.850969] ACPI: Using IOAPIC for interrupt routing
[    0.851428] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.851428] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.953468] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.953647] ACPI: No dock devices found.
[    0.953653] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.954280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.955124] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.955127] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.955131] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.955134] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.955137] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.955139] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.955142] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.955145] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.955148] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.955151] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.955154] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.955157] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.955160] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.955163] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.955166] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.955169] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.955172] pci_root PNP0A08:00: host bridge window [mem 0xe1000000-0xffffffff]
[    0.955181] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    0.955221] PCI host bridge to bus 0000:00
[    0.955224] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.955226] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.955229] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.955232] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.955235] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.955238] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.955240] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.955243] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.955246] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.955249] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.955251] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.955254] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.955257] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.955260] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.955263] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.955266] pci_bus 0000:00: root bus resource [mem 0xe1000000-0xffffffff]
[    0.955285] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[    0.955372] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
[    0.955431] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[    0.955485] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.955508] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[    0.955560] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.955585] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.955638] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.955659] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[    0.955712] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.955786] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.955810] pci 0000:00:11.0: reg 10: [io  0x8038-0x803f]
[    0.955822] pci 0000:00:11.0: reg 14: [io  0x804c-0x804f]
[    0.955834] pci 0000:00:11.0: reg 18: [io  0x8030-0x8037]
[    0.955847] pci 0000:00:11.0: reg 1c: [io  0x8048-0x804b]
[    0.955859] pci 0000:00:11.0: reg 20: [io  0x8010-0x801f]
[    0.955875] pci 0000:00:11.0: reg 24: [mem 0xd2508000-0xd25083ff]
[    0.955947] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.955964] pci 0000:00:12.0: reg 10: [mem 0xd2507000-0xd2507fff]
[    0.956045] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.956062] pci 0000:00:12.1: reg 10: [mem 0xd2506000-0xd2506fff]
[    0.956150] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.956173] pci 0000:00:12.2: reg 10: [mem 0xd2508500-0xd25085ff]
[    0.956276] pci 0000:00:12.2: supports D1 D2
[    0.956279] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.956310] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.956327] pci 0000:00:13.0: reg 10: [mem 0xd2505000-0xd2505fff]
[    0.956410] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.956427] pci 0000:00:13.1: reg 10: [mem 0xd2504000-0xd2504fff]
[    0.956517] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.956541] pci 0000:00:13.2: reg 10: [mem 0xd2508400-0xd25084ff]
[    0.956643] pci 0000:00:13.2: supports D1 D2
[    0.956645] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.956679] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.956804] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.956824] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.956836] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.956848] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.956869] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.956881] pci 0000:00:14.1: reg 20: [io  0x8000-0x800f]
[    0.956954] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.956981] pci 0000:00:14.2: reg 10: [mem 0xd2500000-0xd2503fff 64bit]
[    0.957063] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.957083] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.957178] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.957238] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
[    0.957276] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
[    0.957313] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
[    0.957346] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
[    0.957382] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
[    0.957452] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
[    0.957465] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.957472] pci 0000:01:05.0: reg 14: [io  0x7000-0x70ff]
[    0.957479] pci 0000:01:05.0: reg 18: [mem 0xd2400000-0xd240ffff]
[    0.957495] pci 0000:01:05.0: reg 24: [mem 0xd2300000-0xd23fffff]
[    0.957522] pci 0000:01:05.0: supports D1 D2
[    0.957537] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403
[    0.957550] pci 0000:01:05.1: reg 10: [mem 0xd2410000-0xd2413fff]
[    0.957598] pci 0000:01:05.1: supports D1 D2
[    0.957678] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.957684] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    0.957688] pci 0000:00:01.0:   bridge window [mem 0xd2300000-0xd24fffff]
[    0.957693] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.957729] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    0.957734] pci 0000:00:04.0:   bridge window [io  0x3000-0x6fff]
[    0.957738] pci 0000:00:04.0:   bridge window [mem 0xd1300000-0xd22fffff]
[    0.957744] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.957796] pci 0000:08:00.0: [197b:2382] type 0 class 0x000880
[    0.957815] pci 0000:08:00.0: reg 10: [mem 0xd1200300-0xd12003ff]
[    0.957887] pci 0000:08:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.957979] pci 0000:08:00.2: [197b:2381] type 0 class 0x000805
[    0.957998] pci 0000:08:00.2: reg 10: [mem 0xd1200200-0xd12002ff]
[    0.958151] pci 0000:08:00.3: [197b:2383] type 0 class 0x000880
[    0.958170] pci 0000:08:00.3: reg 10: [mem 0xd1200100-0xd12001ff]
[    0.958329] pci 0000:08:00.4: [197b:2384] type 0 class 0x000880
[    0.958348] pci 0000:08:00.4: reg 10: [mem 0xd1200000-0xd12000ff]
[    0.960891] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[    0.960897] pci 0000:00:05.0:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.960993] pci 0000:09:00.0: [14e4:4315] type 0 class 0x000280
[    0.961015] pci 0000:09:00.0: reg 10: [mem 0xd1100000-0xd1103fff 64bit]
[    0.961120] pci 0000:09:00.0: supports D1 D2
[    0.962911] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[    0.962918] pci 0000:00:06.0:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.962978] pci 0000:0a:00.0: [10ec:8136] type 0 class 0x000200
[    0.962993] pci 0000:0a:00.0: reg 10: [io  0x2000-0x20ff]
[    0.963019] pci 0000:0a:00.0: reg 18: [mem 0xd1010000-0xd1010fff 64bit pref]
[    0.963037] pci 0000:0a:00.0: reg 20: [mem 0xd1000000-0xd100ffff 64bit pref]
[    0.963049] pci 0000:0a:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.963107] pci 0000:0a:00.0: supports D1 D2
[    0.963110] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.964879] pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
[    0.964884] pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
[    0.964891] pci 0000:00:07.0:   bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[    0.964962] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
[    0.964967] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    0.964975] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.964978] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.964981] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.964984] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.964988] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.964991] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.964994] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.964997] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.965004] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.965007] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.965010] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.965014] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.965017] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.965020] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.965023] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.965026] pci 0000:00:14.4:   bridge window [mem 0xe1000000-0xffffffff] (subtractive decode)
[    0.965085] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.965195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.965239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.965293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.965358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[    0.965405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[    0.965485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.965717]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.966028]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.966031] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.974433] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974479] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974523] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974571] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974615] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974658] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.974886] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.974892] vgaarb: loaded
[    0.974894] vgaarb: bridge control possible 0000:01:05.0
[    0.974944] PCI: Using ACPI for IRQ routing
[    0.975985] PCI: pci_cache_line_size set to 64 bytes
[    0.976257] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.976261] reserve RAM buffer: 00000000afd70000 - 00000000afffffff
[    0.976264] reserve RAM buffer: 00000000afe58000 - 00000000afffffff
[    0.976267] reserve RAM buffer: 00000000afeec000 - 00000000afffffff
[    0.976270] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[    0.976397] NetLabel: Initializing
[    0.976399] NetLabel:  domain hash size = 128
[    0.976401] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.976415] NetLabel:  unlabeled traffic allowed by default
[    0.976465] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.976470] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.977879] Switching to clocksource hpet
[    0.985393] pnp: PnP ACPI init
[    0.985415] ACPI: bus type pnp registered
[    0.985918] pnp 00:00: [bus 00-ff]
[    0.985922] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.985924] pnp 00:00: [io  0x0d00-0xffff window]
[    0.985927] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.985930] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.985933] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.985935] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.985938] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.985941] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.985943] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.985946] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.985949] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.985951] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.985954] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.985957] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.985959] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.985962] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.985965] pnp 00:00: [mem 0xe1000000-0xffffffff window]
[    0.985968] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.986112] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.986165] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.986168] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.986245] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.986249] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.986253] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.986398] pnp 00:02: [io  0x0000-0x000f]
[    0.986400] pnp 00:02: [io  0x0081-0x008f]
[    0.986403] pnp 00:02: [io  0x00c0-0x00df]
[    0.986406] pnp 00:02: [dma 4]
[    0.986439] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.986448] pnp 00:03: [io  0x00f0-0x00fe]
[    0.986495] pnp 00:03: [irq 13]
[    0.986528] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.986592] pnp 00:04: [io  0x0070-0x0071]
[    0.986625] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.986637] pnp 00:05: [io  0x0061]
[    0.986671] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.986683] pnp 00:06: [io  0x0060]
[    0.986685] pnp 00:06: [io  0x0064]
[    0.986724] pnp 00:06: [irq 1]
[    0.986761] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.986809] pnp 00:07: [irq 12]
[    0.986846] pnp 00:07: Plug and Play ACPI device, IDs AUI0216 SYN0153 AUI0217 PNP0f13 (active)
[    0.986863] pnp 00:08: [io  0x0010-0x001f]
[    0.986866] pnp 00:08: [io  0x002e-0x002f]
[    0.986868] pnp 00:08: [io  0x0072-0x0073]
[    0.986870] pnp 00:08: [io  0x0080]
[    0.986872] pnp 00:08: [io  0x00b0-0x00b1]
[    0.986874] pnp 00:08: [io  0x0092]
[    0.986877] pnp 00:08: [io  0x0400-0x04cf]
[    0.986879] pnp 00:08: [io  0x04d0-0x04d1]
[    0.986881] pnp 00:08: [io  0x04d6]
[    0.986883] pnp 00:08: [io  0x0680-0x06ff]
[    0.986886] pnp 00:08: [io  0x077a]
[    0.986888] pnp 00:08: [io  0x0c00-0x0c01]
[    0.986890] pnp 00:08: [io  0x0c14]
[    0.986892] pnp 00:08: [io  0x0c50-0x0c52]
[    0.986894] pnp 00:08: [io  0x0c6c]
[    0.986896] pnp 00:08: [io  0x0c6f]
[    0.986899] pnp 00:08: [io  0x0cd0-0x0cdb]
[    0.986969] system 00:08: [io  0x0400-0x04cf] has been reserved
[    0.986972] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.986975] system 00:08: [io  0x04d6] has been reserved
[    0.986977] system 00:08: [io  0x0680-0x06ff] has been reserved
[    0.986980] system 00:08: [io  0x077a] has been reserved
[    0.986983] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.986986] system 00:08: [io  0x0c14] has been reserved
[    0.986989] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    0.986992] system 00:08: [io  0x0c6c] has been reserved
[    0.986995] system 00:08: [io  0x0c6f] has been reserved
[    0.987045] system 00:08: [io  0x0cd0-0x0cdb] has been reserved
[    0.987049] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.987065] pnp 00:09: [mem 0x000e0000-0x000fffff]
[    0.987068] pnp 00:09: [mem 0xfff00000-0xffffffff]
[    0.987130] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.987134] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.987137] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.034099] pnp 00:0a: [io  0xfd60-0xfd63]
[    1.034139] pnp 00:0a: [irq 4]
[    1.034184] pnp 00:0a: Plug and Play ACPI device, IDs ENE0100 (active)
[    1.034215] pnp 00:0b: [irq 23]
[    1.034258] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.034413] pnp: PnP ACPI: found 12 devices
[    1.034416] ACPI: ACPI bus type pnp unregistered
[    1.050561] pci 0000:08:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.050570] pci 0000:0a:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.050577] PCI: max bus depth: 1 pci_try_num: 2
[    1.050661] pci 0000:00:05.0: BAR 15: assigned [mem 0xd2600000-0xd26fffff pref]
[    1.050667] pci 0000:00:07.0: BAR 14: assigned [mem 0xd2700000-0xd27fffff]
[    1.050672] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.050675] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.050680] pci 0000:00:01.0:   bridge window [mem 0xd2300000-0xd24fffff]
[    1.050684] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.050690] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    1.050693] pci 0000:00:04.0:   bridge window [io  0x3000-0x6fff]
[    1.050698] pci 0000:00:04.0:   bridge window [mem 0xd1300000-0xd22fffff]
[    1.050702] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    1.050709] pci 0000:08:00.0: BAR 6: assigned [mem 0xd2600000-0xd260ffff pref]
[    1.050713] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[    1.050717] pci 0000:00:05.0:   bridge window [mem 0xd1200000-0xd12fffff]
[    1.050721] pci 0000:00:05.0:   bridge window [mem 0xd2600000-0xd26fffff pref]
[    1.050727] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[    1.050731] pci 0000:00:06.0:   bridge window [mem 0xd1100000-0xd11fffff]
[    1.050739] pci 0000:0a:00.0: BAR 6: assigned [mem 0xd1020000-0xd103ffff pref]
[    1.050742] pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
[    1.050745] pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
[    1.050749] pci 0000:00:07.0:   bridge window [mem 0xd2700000-0xd27fffff]
[    1.050753] pci 0000:00:07.0:   bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[    1.050759] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[    1.050796] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    1.050819] pci 0000:00:01.0: setting latency timer to 64
[    1.050865] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.050868] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.050871] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.050873] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.050876] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.050879] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.050882] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.050885] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.050887] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.050890] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    1.050893] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.050896] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.050899] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.050901] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    1.050904] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
[    1.050907] pci_bus 0000:00: resource 19 [mem 0xe1000000-0xffffffff]
[    1.050910] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    1.050913] pci_bus 0000:01: resource 1 [mem 0xd2300000-0xd24fffff]
[    1.050916] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.050919] pci_bus 0000:02: resource 0 [io  0x3000-0x6fff]
[    1.050922] pci_bus 0000:02: resource 1 [mem 0xd1300000-0xd22fffff]
[    1.050925] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    1.050928] pci_bus 0000:08: resource 1 [mem 0xd1200000-0xd12fffff]
[    1.050931] pci_bus 0000:08: resource 2 [mem 0xd2600000-0xd26fffff pref]
[    1.050934] pci_bus 0000:09: resource 1 [mem 0xd1100000-0xd11fffff]
[    1.050937] pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
[    1.050940] pci_bus 0000:0a: resource 1 [mem 0xd2700000-0xd27fffff]
[    1.050943] pci_bus 0000:0a: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
[    1.050946] pci_bus 0000:80: resource 0 [io  0x1000-0x1fff]
[    1.050949] pci_bus 0000:80: resource 4 [io  0x0000-0x0cf7]
[    1.050951] pci_bus 0000:80: resource 5 [io  0x0d00-0xffff]
[    1.050954] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
[    1.050957] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.050959] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.050962] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.050965] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.050968] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.050971] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.050973] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff]
[    1.050976] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.050979] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.050982] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.050985] pci_bus 0000:80: resource 17 [mem 0x000ec000-0x000effff]
[    1.050987] pci_bus 0000:80: resource 18 [mem 0xc0000000-0xdfffffff]
[    1.050990] pci_bus 0000:80: resource 19 [mem 0xe1000000-0xffffffff]
[    1.051083] NET: Registered protocol family 2
[    1.051270] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.053117] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.058125] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.058716] TCP: Hash tables configured (established 524288 bind 65536)
[    1.058720] TCP reno registered
[    1.058738] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.058784] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.058928] NET: Registered protocol family 1
[    1.058946] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
Last edited by Garthhh on Jul 1st, '12, 16:04, edited 1 time in total.
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby Garthhh » Jul 1st, '12, 15:51

& the 2nd
Code: Select all
[    1.263124] pci 0000:01:05.0: Boot video device
[    1.263184] PCI: CLS 64 bytes, default 64
[    1.263248] Trying to unpack rootfs image as initramfs...
[    2.110708] Freeing initrd memory: 9328k freed
[    2.116279] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.116284] Placing 64MB software IO TLB between ffff8800abd70000 - ffff8800afd70000
[    2.116287] software IO TLB at phys 0xabd70000 - 0xafd70000
[    2.116338] Simple Boot Flag at 0x44 set to 0x1
[    2.116866] audit: initializing netlink socket (disabled)
[    2.116882] type=2000 audit(1341149219.115:1): initialized
[    2.136662] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.139956] VFS: Disk quotas dquot_6.5.2
[    2.140082] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.140292] msgmni has been set to 7400
[    2.140911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.141198] io scheduler noop registered
[    2.141201] io scheduler deadline registered
[    2.141289] io scheduler cfq registered (default)
[    2.141474] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    2.141571] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    2.141654] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[    2.141739] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[    2.141881] vesafb: mode is 800x600x16, linelength=1600, pages=16
[    2.141883] vesafb: scrolling: redraw
[    2.141886] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.142232] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002200000, using 1875k, total 16384k
[    2.201823] Console: switching to colour frame buffer device 100x37
[    2.260070] fb0: VESA VGA frame buffer device
[    2.260125] GHES: HEST is not enabled!
[    2.260200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.261059] Linux agpgart interface v0.103
[    2.264917] brd: module loaded
[    2.265111] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.287591] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.287599] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.287805] mousedev: PS/2 mouse device common for all mice
[    2.290538] rtc_cmos 00:04: RTC can wake from S4
[    2.290895] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.290929] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.290946] cpuidle: using governor ladder
[    2.290948] cpuidle: using governor menu
[    2.291261] TCP cubic registered
[    2.291264] Registering the dns_resolver key type
[    2.291635] PM: Hibernation image not present or could not be loaded.
[    2.291653] registered taskstats version 1
[    2.292565]   Magic number: 4:831:431
[    2.292711] rtc_cmos 00:04: setting system clock to 2012-07-01 13:26:59 UTC (1341149219)
[    2.292715] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[    2.294577] Freeing unused kernel memory: 744k freed
[    2.294966] Write protecting the kernel read-only data: 10240k
[    2.302188] Freeing unused kernel memory: 1660k freed
[    2.311325] Freeing unused kernel memory: 1996k freed
[    2.323451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.379220] SCSI subsystem initialized
[    2.397590] mpt2sas version 12.100.00.00 loaded
[    2.423801] libata version 3.00 loaded.
[    2.427983] ahci 0000:00:11.0: version 3.0
[    2.428234] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.428239] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    2.429627] scsi0 : ahci
[    2.429977] scsi1 : ahci
[    2.430315] scsi2 : ahci
[    2.430420] scsi3 : ahci
[    2.430506] scsi4 : ahci
[    2.430588] scsi5 : ahci
[    2.430667] ata1: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22
[    2.430672] ata2: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22
[    2.430676] ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22
[    2.430680] ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508280 irq 22
[    2.430684] ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22
[    2.430688] ata6: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22
[    2.735065] ata6: SATA link down (SStatus 0 SControl 300)
[    2.736069] ata3: SATA link down (SStatus 0 SControl 300)
[    2.737031] ata5: SATA link down (SStatus 0 SControl 300)
[    2.739030] ata4: SATA link down (SStatus 0 SControl 300)
[    2.890073] ata2: softreset failed (device not ready)
[    2.890986] ata2: applying PMP SRST workaround and retrying
[    2.893056] ata1: softreset failed (device not ready)
[    2.893952] ata1: applying PMP SRST workaround and retrying
[    3.046080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.048084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.058996] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[    3.072717] ata2.00: configured for UDMA/100
[    3.102091] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[    3.102095] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.104393] ata1.00: configured for UDMA/133
[    3.104641] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0001 PQ: 0 ANSI: 5
[    3.106019] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
[    3.117948] dracut: dracut-017-16.mga2
[    3.126258] loop: module loaded
[    3.128904] dracut: root was mgalive:LABEL=Mageia-2-KDE4-LiveCD, is now mgalive:/dev/disk/by-label/Mageia-2-KDE4-LiveCD
[    3.133368] udevd[97]: starting version 181
[    3.195894] dracut: Starting plymouth daemon
[    3.530938] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[    3.579273] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    4.254726] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    4.258384] acpi device:04: registered as cooling_device0
[    4.258759] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input3
[    4.258768] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    4.281077] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.281132] sd 0:0:0:0: [sda] Write Protect is off
[    4.281136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.281159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.288511] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.288517] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.288699] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.292023] sdhci: Secure Digital Host Controller Interface driver
[    4.292026] sdhci: Copyright(c) Pierre Ossman
[    4.319199] usbcore: registered new interface driver usbfs
[    4.319234] usbcore: registered new interface driver hub
[    4.323286] usbcore: registered new device driver usb
[    4.323649] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.323748] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    4.323754] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    4.323796] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[    4.323819] QUIRK: Enable AMD PLL fix
[    4.323891] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000
[    4.334163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.334167] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.377048]  sda: sda1 sda2 < sda5 >
[    4.377469] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.379849] sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 0)
[    4.380032] Registered led device: mmc0::
[    4.382949] mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA
[    4.382978] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0)
[    4.383062] sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.
[    4.383182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.383187] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.383191] usb usb1: Product: OHCI Host Controller
[    4.383193] usb usb1: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    4.383196] usb usb1: SerialNumber: 0000:00:12.0
[    4.383422] hub 1-0:1.0: USB hub found
[    4.383466] hub 1-0:1.0: 3 ports detected
[    4.383786] ohci_hcd 0000:00:12.1: setting latency timer to 64
[    4.383790] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    4.383802] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
[    4.383831] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000
[    4.438112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.438117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.438121] usb usb2: Product: OHCI Host Controller
[    4.438123] usb usb2: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    4.438126] usb usb2: SerialNumber: 0000:00:12.1
[    4.438299] hub 2-0:1.0: USB hub found
[    4.438309] hub 2-0:1.0: 3 ports detected
[    4.438473] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    4.438478] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.438490] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
[    4.438535] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000
[    4.493145] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.493150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.493153] usb usb3: Product: OHCI Host Controller
[    4.493155] usb usb3: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    4.493158] usb usb3: SerialNumber: 0000:00:13.0
[    4.493370] hub 3-0:1.0: USB hub found
[    4.493378] hub 3-0:1.0: 3 ports detected
[    4.493538] ohci_hcd 0000:00:13.1: setting latency timer to 64
[    4.493543] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    4.493554] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
[    4.493582] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000
[    4.548108] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.548113] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.548116] usb usb4: Product: OHCI Host Controller
[    4.548119] usb usb4: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    4.548121] usb usb4: SerialNumber: 0000:00:13.1
[    4.548335] hub 4-0:1.0: USB hub found
[    4.548343] hub 4-0:1.0: 3 ports detected
[    4.548820] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    4.548825] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    4.548839] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[    4.548850] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.548874] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    4.548889] ehci_hcd 0000:00:12.2: debug port 1
[    4.548963] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500
[    4.554059] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    4.554113] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.554116] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.554119] usb usb5: Product: EHCI Host Controller
[    4.554121] usb usb5: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    4.554124] usb usb5: SerialNumber: 0000:00:12.2
[    4.554316] hub 5-0:1.0: USB hub found
[    4.554322] hub 5-0:1.0: 6 ports detected
[    4.554495] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    4.554499] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    4.554510] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[    4.554520] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.554541] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    4.554556] ehci_hcd 0000:00:13.2: debug port 1
[    4.554590] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400
[    4.560065] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    4.560088] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    4.560091] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.560094] usb usb6: Product: EHCI Host Controller
[    4.560096] usb usb6: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    4.560099] usb usb6: SerialNumber: 0000:00:13.2
[    4.560356] hub 6-0:1.0: USB hub found
[    4.560361] hub 6-0:1.0: 6 ports detected
[    4.560650] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    4.561294] scsi6 : pata_atiixp
[    4.561483] scsi7 : pata_atiixp
[    4.562120] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14
[    4.562123] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15
[    4.723112] Uniform Multi-Platform E-IDE driver
[    4.884062] usb 5-1: new high-speed USB device number 2 using ehci_hcd
[    5.113276] usb 5-1: New USB device found, idVendor=0951, idProduct=1606
[    5.113282] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    5.113285] usb 5-1: Product: DTCR
[    5.113287] usb 5-1: Manufacturer: KINGSTON
[    5.113289] usb 5-1: SerialNumber: 1234567890123456
[    5.116080] usbcore: registered new interface driver uas
[    5.120946] Initializing USB Mass Storage driver...
[    5.121435] scsi8 : usb-storage 5-1:1.0
[    5.121554] usbcore: registered new interface driver usb-storage
[    5.121557] USB Mass Storage support registered.
[    5.215066] usb 5-6: new high-speed USB device number 3 using ehci_hcd
[    5.347229] usb 5-6: New USB device found, idVendor=064e, idProduct=c107
[    5.347232] usb 5-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    5.347235] usb 5-6: Product: HP Webcam
[    5.347237] usb 5-6: Manufacturer: SuYin
[    5.347239] usb 5-6: SerialNumber: CN0314-MM00-MI01-VH-R53.90.01
[    6.124806] scsi 8:0:0:0: Direct-Access     USB2.0   KINGSTON   SD0   0201 PQ: 0 ANSI: 0
[    6.476569] scsi 8:0:0:1: Direct-Access     USB2.0   KINGSTON   SD1   0201 PQ: 0 ANSI: 0
[    6.479937] sd 8:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[    6.481192] sd 8:0:0:0: [sdb] Write Protect is off
[    6.481198] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    6.481940] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[    6.482556] sd 8:0:0:0: [sdb] No Caching mode page present
[    6.482561] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    6.485557] sd 8:0:0:0: [sdb] No Caching mode page present
[    6.485564] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    6.486831]  sdb: sdb1
[    6.490677] sd 8:0:0:0: [sdb] No Caching mode page present
[    6.490683] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    6.490686] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    6.744204] ISO 9660 Extensions: Microsoft Joliet Level 3
[    6.748504] ISO 9660 Extensions: RRIP_1991A
[    6.758902] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.783730] Registering unionfs 2.5.11 (for 3.3.0-rc3)
[    6.861072] dracut: Mounted root filesystem unionfs
[    7.035132] dracut: Switching root
[    7.037920] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    8.371907] NET: Registered protocol family 10
[    9.306884] udevd[259]: starting version 181
[   10.295971] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   10.295980] ACPI: Power Button [PWRB]
[   10.296087] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   10.296178] ACPI: Lid Switch [LID]
[   10.296230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   10.296233] ACPI: Power Button [PWRF]
[   10.300851] ACPI: AC Adapter [ACAD] (on-line)
[   10.532490] wmi: Mapper loaded
[   10.671261] thermal LNXTHERM:00: registered as thermal_zone0
[   10.671266] ACPI: Thermal Zone [TZ01] (70 C)
[   10.854849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.049158] ACPI: Battery Slot [BAT0] (battery present)
[   11.327938] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   11.328055] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[   11.583364] lib80211: common routines for IEEE802.11 drivers
[   11.583369] lib80211_crypt: registered algorithm 'NULL'
[   11.811399] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.076146] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   12.076150] ene_ir: PLL freq = 1406
[   12.076152] ene_ir: KB3926C detected
[   12.076166] ene_ir: Firmware regs: c0 01
[   12.076167] ene_ir: Hardware features:
[   12.076169] ene_ir: * Uses GPIO 40 for IR demodulated input
[   12.088121] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   12.088255] r8169 0000:0a:00.0: irq 44 for MSI/MSI-X
[   12.088786] r8169 0000:0a:00.0: eth0: RTL8102e at 0xffffc90000668000, 00:23:5a:1b:f2:a8, XID 04a00000 IRQ 44
[   12.166961] hp_accel: laptop model unknown, using default axes configuration
[   12.167690] lis3lv02d: 8 bits sensor found
[   12.191956] IR NEC protocol handler initialized
[   12.196716] IR RC5(x) protocol handler initialized
[   12.203197] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   12.203604] Registered led device: hp::hddprotect
[   12.203626] hp_accel: driver loaded
[   12.319326] IR RC6 protocol handler initialized
[   12.346896] wl: module license 'unspecified' taints kernel.
[   12.346902] Disabling lock debugging due to kernel taint
[   12.465032] Registered IR keymap rc-rc6-mce
[   12.465152] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   12.465270] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   12.465325] ene_ir: driver has been successfully loaded
[   12.591838] vboxguest: VirtualBox Guest PCI device not found.
[   12.669659] IR JVC protocol handler initialized
[   12.718482] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   12.816715] lib80211_crypt: registered algorithm 'TKIP'
[   12.817180] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[   12.855720] IR Sony protocol handler initialized
[   12.904273] IR SANYO protocol handler initialized
[   12.908909] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[   12.909253] IR MCE Keyboard/mouse protocol handler initialized
[   12.919920] lirc_dev: IR Remote Control driver registered, major 252
[   12.923868] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   12.923873] IR LIRC bridge handler initialized
[   12.965598] Linux media interface: v0.10
[   13.338264] Linux video capture interface: v2.00
[   13.875422] hda-intel: Using LPIB position fix
[   13.875474] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[   13.880281] input: HP WMI hotkeys as /devices/virtual/input/input10
[   13.883207] hda-intel: Enable sync_write for stable communication
[   13.952921] mute LED gpio 1 polarity 1
[   13.952930] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   13.952933]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.952935]    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   13.952937]    mono: mono_out=0x0
[   13.952939]    inputs: Mic=0xb
[   13.953296] stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
[   13.975211] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[   13.994179] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb5/5-6/5-6:1.0/input/input11
[   13.994301] usbcore: registered new interface driver uvcvideo
[   13.994303] USB Video Class driver (1.1.1)
[   14.030513] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   14.030688] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[   14.031382] hda-intel: Using LPIB position fix
[   14.031458] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[   14.041265] hda-intel: Enable sync_write for stable communication
[   15.626330] device-mapper: uevent: version 1.0.3
[   15.626475] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   21.754967] unionfs: new lower inode mtime (bindex=0, name=harddrake2)
[   26.975918] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[   26.988980] ide-gd driver 1.18
[   33.439496] usbcore: registered new interface driver usbhid
[   33.439500] usbhid: USB HID core driver
[   53.755804] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   53.971780] [fglrx] Maximum main memory to use for locked dma buffers: 3546 MBytes.
[   53.971890] [fglrx]   vendor: 1002 device: 9612 count: 1
[   53.972637] [fglrx] ioport: bar 1, base 0x7000, size: 0x100
[   53.972654] pci 0000:01:05.0: power state changed by ACPI to D0
[   53.972659] pci 0000:01:05.0: power state changed by ACPI to D0
[   53.972671] pci 0000:01:05.0: setting latency timer to 64
[   53.973333] [fglrx] Kernel PAT support is enabled
[   53.973360] [fglrx] module loaded - fglrx 8.96.4 [Apr  5 2012] with 1 minors
[   61.027212] microcode: CPU0: patch_level=0x02000032
[   61.055300] microcode: failed to load file amd-ucode/microcode_amd.bin
[   61.055316] microcode: CPU1: patch_level=0x02000032
[   61.057358] microcode: failed to load file amd-ucode/microcode_amd.bin
[   61.057441] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   61.397802] microcode: Microcode Update Driver: v2.00 removed.
[   64.878598] [fglrx] ATIF platform detected with notification ID: 0x81
[   64.924813] r8169 0000:0a:00.0: eth0: link down
[   64.927114] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   65.020688] [fglrx] GART Table is not in FRAME_BUFFER range
[   65.021117] [fglrx] Could not enable MSI; System prevented initialization
[   65.022042] [fglrx] Firegl kernel thread PID: 1205
[   65.022205] [fglrx] Firegl kernel thread PID: 1206
[   65.022468] [fglrx] Firegl kernel thread PID: 1207
[   65.022681] [fglrx] IRQ 18 Enabled
[   65.305608] unionfs: new lower inode mtime (bindex=0, name=ati)
[   65.461710] [fglrx] Gart USWC size:1160 M.
[   65.461715] [fglrx] Gart cacheable size:459 M.
[   65.461720] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   65.461723] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[   70.158426] ip_tables: (C) 2000-2006 Netfilter Core Team
[   72.370990] Netfilter messages via NETLINK v0.30.
[   72.516410] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   73.688416] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   73.689582] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   73.689587] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   73.885961] ctnetlink v0.93: registering with nfnetlink.
[   74.239630] ip_set: protocol 6
[   74.408344] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   75.741817] xt_time: kernel timezone is -0000
[   76.044330] Bridge firewalling registered
[   76.313240] u32 classifier
[   76.313244]     Actions configured
[   76.529926] netfilter PSD loaded - (c) astaro AG
[   76.533417] IFWLOG: register target
[  236.749410] unionfs: new lower inode mtime (bindex=0, name=etc)
[  245.329839] unionfs: new lower inode mtime (bindex=0, name=sysconfig)
[  245.740392] unionfs: new lower inode mtime (bindex=0, name=30osvendor)
[  245.777075] unionfs: new lower inode mtime (bindex=0, name=boot)
[  250.536445] fuse init (API version 7.18)
[  275.936579] unionfs: new lower inode mtime (bindex=0, name=log)
[  318.644839] r8169 0000:0a:00.0: eth0: link up
[  318.645586] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  321.602796] NET: Registered protocol family 17
[  328.930067] eth0: no IPv6 routers present
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby martinw » Jul 2nd, '12, 01:20

Well, the driver has loaded without reporting any errors:
Code: Select all
[   12.817180] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112

but it doesn't seem to be trying to associate with the access point. Can you try reconfiguring the wireless connection and then attempt to connect again, then rerun dmesg and see if any new (helpful) messages have appeared. Also the output from
Code: Select all
iwconfig eth1
iwlist scan eth1

might be helpful.
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Re: broadcom 4312 chipset

Postby Garthhh » Jul 2nd, '12, 06:39

1st 1/2
Code: Select all
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.6-desktop-2.mga2 (iurt@jonund.mageia.org) (gcc version 4.6.3 (GCC) ) #1 SMP Thu May 17 16:25:59 UTC 2012
[    0.000000] Command line: automatic=method:cdrom initrd=/boot/cdrom/initrd.gz root=mgalive:LABEL=Mageia-2-KDE4-LiveCD splash quiet rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=788
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afd70000 (usable)
[    0.000000]  BIOS-e820: 00000000afd70000 - 00000000afdbf000 (reserved)
[    0.000000]  BIOS-e820: 00000000afdbf000 - 00000000afe58000 (usable)
[    0.000000]  BIOS-e820: 00000000afe58000 - 00000000afebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000afebf000 - 00000000afeec000 (usable)
[    0.000000]  BIOS-e820: 00000000afeec000 - 00000000afeff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000afeff000 - 00000000aff00000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000e1000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv4 Notebook PC/30FB, BIOS F.33 11/02/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FFF00000 mask FFFFF00000 write-protect
[    0.000000]   1 base 0000000000 mask FF80000000 write-back
[    0.000000]   2 base 0080000000 mask FFE0000000 write-back
[    0.000000]   3 base 00A0000000 mask FFF0000000 write-back
[    0.000000]   4 base 0100000000 mask FFC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[    0.000000]  0000000000 - 00afe00000 page 2M
[    0.000000]  00afe00000 - 00aff00000 page 4k
[    0.000000] kernel direct mapping tables up to aff00000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ afee6000-afeec000
[    0.000000] RAMDISK: 7f6e4000 - 80000000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000afefe120 0005C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 00000000afefd000 000F4 (v04 HP     REPLEY   00000003 LOHR 01000013)
[    0.000000] ACPI: DSDT 00000000afeef000 0A15F (v01 HP     REPLEY   F0000000 LOHR 01000013)
[    0.000000] ACPI: FACS 00000000afe61000 00040
[    0.000000] ACPI: HPET 00000000afefc000 00038 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: APIC 00000000afefb000 00084 (v02 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: MCFG 00000000afefa000 0003C (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: BOOT 00000000afeee000 00028 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: SLIC 00000000afeed000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 01000013)
[    0.000000] ACPI: SSDT 00000000afeec000 00386 (v01 AMD    PowerNow 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ba00000-ffff88013f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000afd70
[    0.000000]     0: 0x000afdbf -> 0x000afe58
[    0.000000]     0: 0x000afebf -> 0x000afeec
[    0.000000]     0: 0x000afeff -> 0x000aff00
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 982470
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 700023 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000afd70000 - 00000000afdbf000
[    0.000000] PM: Registered nosave memory: 00000000afe58000 - 00000000afebf000
[    0.000000] PM: Registered nosave memory: 00000000afeec000 - 00000000afeff000
[    0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e1000000
[    0.000000] PM: Registered nosave memory: 00000000e1000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:30100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81344 r8192 d21056 u524288
[    0.000000] pcpu-alloc: s81344 r8192 d21056 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 961985
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: automatic=method:cdrom initrd=/boot/cdrom/initrd.gz root=mgalive:LABEL=Mageia-2-KDE4-LiveCD splash quiet rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 vga=788
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3779756k/5242880k available (4465k kernel code, 1313000k absent, 150124k reserved, 6415k data, 744k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2100.150 MHz processor.
[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.30 BogoMIPS (lpj=2100150)
[    0.001009] pid_max: default: 32768 minimum: 301
[    0.001039] Security Framework initialized
[    0.001053] TOMOYO Linux initialized
[    0.001508] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005809] Mount-cache hash table entries: 256
[    0.006011] Initializing cgroup subsys cpuacct
[    0.006014] Initializing cgroup subsys devices
[    0.006017] Initializing cgroup subsys freezer
[    0.006019] Initializing cgroup subsys net_cls
[    0.006021] Initializing cgroup subsys blkio
[    0.006059] tseg: 00aff00000
[    0.006062] CPU: Physical Processor ID: 0
[    0.006064] CPU: Processor Core ID: 0
[    0.006066] mce: CPU supports 5 MCE banks
[    0.007307] ACPI: Checking initramfs for custom DSDT
[    1.313707] ACPI: Core revision 20120111
[    1.318818] ftrace: allocating 17207 entries in 68 pages
[    1.326980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.336977] CPU0: AMD Turion(tm) X2 Dual-Core Mobile RM-72 stepping 01
[    1.337804] Performance Events: AMD PMU driver.
[    1.337804] ... version:                0
[    1.337804] ... bit width:              48
[    1.337804] ... generic registers:      4
[    1.337804] ... value mask:             0000ffffffffffff
[    1.337804] ... max period:             00007fffffffffff
[    1.337804] ... fixed-purpose events:   0
[    1.337804] ... event mask:             000000000000000f
[    1.337804] MCE: In-kernel MCE decoding enabled.
[    1.337804] Booting Node   0, Processors  #1
[    1.337804] smpboot cpu 1: start_ip = 9a000
[    1.348803] TSC synchronization [CPU#0 -> CPU#1]:
[    1.348803] Measured 204309097 cycles TSC warp between CPUs, turning off TSC clock.
[    1.348803] Marking TSC unstable due to check_tsc_sync_source failed
[    1.348815] Brought up 2 CPUs
[    1.348818] Total of 2 processors activated (8400.60 BogoMIPS).
[    1.349925] devtmpfs: initialized
[    1.351836] PM: Registering ACPI NVS region at afe58000 (421888 bytes)
[    1.353471] RTC time:  4:20:37, date: 07/02/12
[    1.353525] NET: Registered protocol family 16
[    1.353695] TOM: 00000000c0000000 aka 3072M
[    1.353699] Fam 10h mmconf [mem 0xe0000000-0xe0ffffff]
[    1.353708] TOM2: 0000000140000000 aka 5120M
[    1.353876] ACPI: bus type pci registered
[    1.353983] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xe0000000-0xe0ffffff] (base 0xe0000000)
[    1.353987] PCI: MMCONFIG at [mem 0xe0000000-0xe0ffffff] reserved in E820
[    1.356320] PCI: Using configuration type 1 for base access
[    1.356844] bio: create slab <bio-0> at 0
[    1.356860] ACPI: Added _OSI(Module Device)
[    1.356860] ACPI: Added _OSI(Processor Device)
[    1.356860] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.356861] ACPI: Added _OSI(Processor Aggregator Device)
[    1.358693] ACPI: EC: Look up EC in DSDT
[    1.360265] ACPI: Executed 1 blocks of module-level executable AML code
[    1.362126] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.382851] ACPI: Interpreter enabled
[    1.382858] ACPI: (supports S0 S3 S4 S5)
[    1.382889] ACPI: Using IOAPIC for interrupt routing
[    1.383373] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.383979] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.489363] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    1.489550] ACPI: No dock devices found.
[    1.489556] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.490184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.491025] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.491028] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.491031] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.491034] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    1.491037] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    1.491040] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    1.491043] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    1.491046] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    1.491049] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.491052] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.491055] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    1.491058] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.491061] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    1.491064] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    1.491067] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    1.491070] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    1.491073] pci_root PNP0A08:00: host bridge window [mem 0xe1000000-0xffffffff]
[    1.491082] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[    1.491122] PCI host bridge to bus 0000:00
[    1.491125] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.491128] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.491130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.491133] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    1.491136] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    1.491139] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    1.491141] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.491144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.491147] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.491150] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.491152] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.491155] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.491158] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    1.491161] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    1.491164] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    1.491166] pci_bus 0000:00: root bus resource [mem 0xe1000000-0xffffffff]
[    1.491185] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[    1.491271] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
[    1.491330] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[    1.491384] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    1.491407] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[    1.491459] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    1.491481] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    1.491534] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    1.491555] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[    1.491608] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    1.491685] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    1.491709] pci 0000:00:11.0: reg 10: [io  0x8038-0x803f]
[    1.491722] pci 0000:00:11.0: reg 14: [io  0x804c-0x804f]
[    1.491734] pci 0000:00:11.0: reg 18: [io  0x8030-0x8037]
[    1.491746] pci 0000:00:11.0: reg 1c: [io  0x8048-0x804b]
[    1.491758] pci 0000:00:11.0: reg 20: [io  0x8010-0x801f]
[    1.491771] pci 0000:00:11.0: reg 24: [mem 0xd2508000-0xd25083ff]
[    1.491849] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    1.491866] pci 0000:00:12.0: reg 10: [mem 0xd2507000-0xd2507fff]
[    1.491948] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    1.491964] pci 0000:00:12.1: reg 10: [mem 0xd2506000-0xd2506fff]
[    1.492052] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    1.492076] pci 0000:00:12.2: reg 10: [mem 0xd2508500-0xd25085ff]
[    1.492178] pci 0000:00:12.2: supports D1 D2
[    1.492181] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    1.492212] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    1.492230] pci 0000:00:13.0: reg 10: [mem 0xd2505000-0xd2505fff]
[    1.492313] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    1.492330] pci 0000:00:13.1: reg 10: [mem 0xd2504000-0xd2504fff]
[    1.492418] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    1.492442] pci 0000:00:13.2: reg 10: [mem 0xd2508400-0xd25084ff]
[    1.492544] pci 0000:00:13.2: supports D1 D2
[    1.492546] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    1.492580] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    1.492707] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    1.492727] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    1.492739] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    1.492751] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    1.492763] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    1.492775] pci 0000:00:14.1: reg 20: [io  0x8000-0x800f]
[    1.492855] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    1.492881] pci 0000:00:14.2: reg 10: [mem 0xd2500000-0xd2503fff 64bit]
[    1.492963] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    1.492983] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    1.493078] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    1.493138] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
[    1.493174] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
[    1.493205] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
[    1.493237] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
[    1.493280] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
[    1.493353] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
[    1.493366] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    1.493373] pci 0000:01:05.0: reg 14: [io  0x7000-0x70ff]
[    1.493380] pci 0000:01:05.0: reg 18: [mem 0xd2400000-0xd240ffff]
[    1.493396] pci 0000:01:05.0: reg 24: [mem 0xd2300000-0xd23fffff]
[    1.493423] pci 0000:01:05.0: supports D1 D2
[    1.493438] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403
[    1.493451] pci 0000:01:05.1: reg 10: [mem 0xd2410000-0xd2413fff]
[    1.493499] pci 0000:01:05.1: supports D1 D2
[    1.493580] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.493585] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.493589] pci 0000:00:01.0:   bridge window [mem 0xd2300000-0xd24fffff]
[    1.493595] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.493630] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    1.493635] pci 0000:00:04.0:   bridge window [io  0x3000-0x6fff]
[    1.493639] pci 0000:00:04.0:   bridge window [mem 0xd1300000-0xd22fffff]
[    1.493645] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    1.493697] pci 0000:08:00.0: [197b:2382] type 0 class 0x000880
[    1.493716] pci 0000:08:00.0: reg 10: [mem 0xd1200300-0xd12003ff]
[    1.493791] pci 0000:08:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    1.493883] pci 0000:08:00.2: [197b:2381] type 0 class 0x000805
[    1.493902] pci 0000:08:00.2: reg 10: [mem 0xd1200200-0xd12002ff]
[    1.494056] pci 0000:08:00.3: [197b:2383] type 0 class 0x000880
[    1.494074] pci 0000:08:00.3: reg 10: [mem 0xd1200100-0xd12001ff]
[    1.494230] pci 0000:08:00.4: [197b:2384] type 0 class 0x000880
[    1.494249] pci 0000:08:00.4: reg 10: [mem 0xd1200000-0xd12000ff]
[    1.496808] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[    1.496815] pci 0000:00:05.0:   bridge window [mem 0xd1200000-0xd12fffff]
[    1.496911] pci 0000:09:00.0: [14e4:4315] type 0 class 0x000280
[    1.496932] pci 0000:09:00.0: reg 10: [mem 0xd1100000-0xd1103fff 64bit]
[    1.497044] pci 0000:09:00.0: supports D1 D2
[    1.498829] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[    1.498836] pci 0000:00:06.0:   bridge window [mem 0xd1100000-0xd11fffff]
[    1.498898] pci 0000:0a:00.0: [10ec:8136] type 0 class 0x000200
[    1.498914] pci 0000:0a:00.0: reg 10: [io  0x2000-0x20ff]
[    1.498940] pci 0000:0a:00.0: reg 18: [mem 0xd1010000-0xd1010fff 64bit pref]
[    1.498957] pci 0000:0a:00.0: reg 20: [mem 0xd1000000-0xd100ffff 64bit pref]
[    1.498969] pci 0000:0a:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    1.499028] pci 0000:0a:00.0: supports D1 D2
[    1.499030] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.500800] pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
[    1.500805] pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
[    1.500812] pci 0000:00:07.0:   bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[    1.500883] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
[    1.500889] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    1.500897] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.500900] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.500903] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.500907] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    1.500910] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    1.500913] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    1.500916] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    1.500919] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.500922] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.500925] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    1.500929] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    1.500932] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    1.500935] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    1.500938] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    1.500941] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    1.500944] pci 0000:00:14.4:   bridge window [mem 0xe1000000-0xffffffff] (subtractive decode)
[    1.501003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.501125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    1.501172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    1.501227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    1.501292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[    1.501338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[    1.501418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    1.501659]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.501971]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    1.501973] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.510309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510360] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510405] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510450] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510500] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510545] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510590] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510635] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    1.510809] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    1.510809] vgaarb: loaded
[    1.510809] vgaarb: bridge control possible 0000:01:05.0
[    1.510835] PCI: Using ACPI for IRQ routing
[    1.511900] PCI: pci_cache_line_size set to 64 bytes
[    1.512170] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    1.512173] reserve RAM buffer: 00000000afd70000 - 00000000afffffff
[    1.512176] reserve RAM buffer: 00000000afe58000 - 00000000afffffff
[    1.512179] reserve RAM buffer: 00000000afeec000 - 00000000afffffff
[    1.512182] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[    1.512318] NetLabel: Initializing
[    1.512320] NetLabel:  domain hash size = 128
[    1.512322] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.512336] NetLabel:  unlabeled traffic allowed by default
[    1.512388] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.512393] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    1.513797] Switching to clocksource hpet
[    1.521279] pnp: PnP ACPI init
[    1.521306] ACPI: bus type pnp registered
[    1.521798] pnp 00:00: [bus 00-ff]
[    1.521801] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.521804] pnp 00:00: [io  0x0d00-0xffff window]
[    1.521807] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.521810] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.521812] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.521815] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.521818] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.521824] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.521827] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.521829] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.521832] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.521835] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.521837] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.521840] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.521843] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.521845] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    1.521848] pnp 00:00: [mem 0xe1000000-0xffffffff window]
[    1.521851] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.521945] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.521997] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    1.522049] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    1.522128] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.522132] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.522136] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.522281] pnp 00:02: [io  0x0000-0x000f]
[    1.522283] pnp 00:02: [io  0x0081-0x008f]
[    1.522286] pnp 00:02: [io  0x00c0-0x00df]
[    1.522289] pnp 00:02: [dma 4]
[    1.522324] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.522333] pnp 00:03: [io  0x00f0-0x00fe]
[    1.522380] pnp 00:03: [irq 13]
[    1.522414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.522478] pnp 00:04: [io  0x0070-0x0071]
[    1.522511] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.522520] pnp 00:05: [io  0x0061]
[    1.522554] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.522566] pnp 00:06: [io  0x0060]
[    1.522568] pnp 00:06: [io  0x0064]
[    1.522607] pnp 00:06: [irq 1]
[    1.522640] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.522692] pnp 00:07: [irq 12]
[    1.522730] pnp 00:07: Plug and Play ACPI device, IDs AUI0216 SYN0153 AUI0217 PNP0f13 (active)
[    1.522744] pnp 00:08: [io  0x0010-0x001f]
[    1.522747] pnp 00:08: [io  0x002e-0x002f]
[    1.522749] pnp 00:08: [io  0x0072-0x0073]
[    1.522751] pnp 00:08: [io  0x0080]
[    1.522753] pnp 00:08: [io  0x00b0-0x00b1]
[    1.522755] pnp 00:08: [io  0x0092]
[    1.522758] pnp 00:08: [io  0x0400-0x04cf]
[    1.522760] pnp 00:08: [io  0x04d0-0x04d1]
[    1.522762] pnp 00:08: [io  0x04d6]
[    1.522764] pnp 00:08: [io  0x0680-0x06ff]
[    1.522767] pnp 00:08: [io  0x077a]
[    1.522769] pnp 00:08: [io  0x0c00-0x0c01]
[    1.522771] pnp 00:08: [io  0x0c14]
[    1.522773] pnp 00:08: [io  0x0c50-0x0c52]
[    1.522775] pnp 00:08: [io  0x0c6c]
[    1.522778] pnp 00:08: [io  0x0c6f]
[    1.522780] pnp 00:08: [io  0x0cd0-0x0cdb]
[    1.522850] system 00:08: [io  0x0400-0x04cf] has been reserved
[    1.522853] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    1.522856] system 00:08: [io  0x04d6] has been reserved
[    1.522859] system 00:08: [io  0x0680-0x06ff] has been reserved
[    1.522862] system 00:08: [io  0x077a] has been reserved
[    1.522864] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    1.522867] system 00:08: [io  0x0c14] has been reserved
[    1.522870] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    1.522873] system 00:08: [io  0x0c6c] has been reserved
[    1.522876] system 00:08: [io  0x0c6f] has been reserved
[    1.522879] system 00:08: [io  0x0cd0-0x0cdb] has been reserved
[    1.522882] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.522902] pnp 00:09: [mem 0x000e0000-0x000fffff]
[    1.522905] pnp 00:09: [mem 0xfff00000-0xffffffff]
[    1.522967] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.522971] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    1.522974] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.565112] pnp 00:0a: [io  0xfd60-0xfd63]
[    1.565159] pnp 00:0a: [irq 4]
[    1.565234] pnp 00:0a: Plug and Play ACPI device, IDs ENE0100 (active)
[    1.565266] pnp 00:0b: [irq 23]
[    1.565309] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.565465] pnp: PnP ACPI: found 12 devices
[    1.565467] ACPI: ACPI bus type pnp unregistered
[    1.581218] pci 0000:08:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.581228] pci 0000:0a:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.581235] PCI: max bus depth: 1 pci_try_num: 2
[    1.581321] pci 0000:00:05.0: BAR 15: assigned [mem 0xd2600000-0xd26fffff pref]
[    1.581327] pci 0000:00:07.0: BAR 14: assigned [mem 0xd2700000-0xd27fffff]
[    1.581332] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.581336] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.581340] pci 0000:00:01.0:   bridge window [mem 0xd2300000-0xd24fffff]
[    1.581345] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.581350] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    1.581354] pci 0000:00:04.0:   bridge window [io  0x3000-0x6fff]
[    1.581358] pci 0000:00:04.0:   bridge window [mem 0xd1300000-0xd22fffff]
[    1.581362] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    1.581370] pci 0000:08:00.0: BAR 6: assigned [mem 0xd2600000-0xd260ffff pref]
[    1.581373] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[    1.581378] pci 0000:00:05.0:   bridge window [mem 0xd1200000-0xd12fffff]
[    1.581382] pci 0000:00:05.0:   bridge window [mem 0xd2600000-0xd26fffff pref]
[    1.581388] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[    1.581392] pci 0000:00:06.0:   bridge window [mem 0xd1100000-0xd11fffff]
[    1.581400] pci 0000:0a:00.0: BAR 6: assigned [mem 0xd1020000-0xd103ffff pref]
[    1.581403] pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
[    1.581406] pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
[    1.581411] pci 0000:00:07.0:   bridge window [mem 0xd2700000-0xd27fffff]
[    1.581415] pci 0000:00:07.0:   bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[    1.581421] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[    1.581458] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    1.581481] pci 0000:00:01.0: setting latency timer to 64
[    1.581527] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.581530] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.581533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.581536] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.581539] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.581542] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.581545] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.581548] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.581550] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.581553] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    1.581556] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.581559] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.581562] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.581565] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    1.581568] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
[    1.581571] pci_bus 0000:00: resource 19 [mem 0xe1000000-0xffffffff]
[    1.581574] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    1.581577] pci_bus 0000:01: resource 1 [mem 0xd2300000-0xd24fffff]
[    1.581580] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.581583] pci_bus 0000:02: resource 0 [io  0x3000-0x6fff]
[    1.581586] pci_bus 0000:02: resource 1 [mem 0xd1300000-0xd22fffff]
[    1.581589] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    1.581592] pci_bus 0000:08: resource 1 [mem 0xd1200000-0xd12fffff]
[    1.581595] pci_bus 0000:08: resource 2 [mem 0xd2600000-0xd26fffff pref]
[    1.581599] pci_bus 0000:09: resource 1 [mem 0xd1100000-0xd11fffff]
[    1.581602] pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
[    1.581605] pci_bus 0000:0a: resource 1 [mem 0xd2700000-0xd27fffff]
[    1.581608] pci_bus 0000:0a: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
[    1.581611] pci_bus 0000:80: resource 0 [io  0x1000-0x1fff]
[    1.581614] pci_bus 0000:80: resource 4 [io  0x0000-0x0cf7]
[    1.581616] pci_bus 0000:80: resource 5 [io  0x0d00-0xffff]
[    1.581619] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
[    1.581622] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.581625] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.581628] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.581631] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.581634] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.581637] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.581639] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff]
[    1.581642] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.581645] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.581648] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.581651] pci_bus 0000:80: resource 17 [mem 0x000ec000-0x000effff]
[    1.581654] pci_bus 0000:80: resource 18 [mem 0xc0000000-0xdfffffff]
[    1.581657] pci_bus 0000:80: resource 19 [mem 0xe1000000-0xffffffff]
[    1.581709] NET: Registered protocol family 2
[    1.581893] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.583733] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.588731] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.589353] TCP: Hash tables configured (established 524288 bind 65536)
[    1.589357] TCP reno registered
[    1.589377] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.589423] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.589564] NET: Registered protocol family 1
[    1.589578] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby Garthhh » Jul 2nd, '12, 06:44

Code: Select all
[    1.793122] pci 0000:01:05.0: Boot video device
[    1.793185] PCI: CLS 64 bytes, default 64
[    1.793249] Trying to unpack rootfs image as initramfs...
[    2.640177] Freeing initrd memory: 9328k freed
[    2.645702] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.645708] Placing 64MB software IO TLB between ffff8800abd70000 - ffff8800afd70000
[    2.645711] software IO TLB at phys 0xabd70000 - 0xafd70000
[    2.645763] Simple Boot Flag at 0x44 set to 0x1
[    2.646368] audit: initializing netlink socket (disabled)
[    2.646385] type=2000 audit(1341202838.645:1): initialized
[    2.666162] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.669457] VFS: Disk quotas dquot_6.5.2
[    2.669534] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.669738] msgmni has been set to 7400
[    2.670373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.670639] io scheduler noop registered
[    2.670642] io scheduler deadline registered
[    2.670726] io scheduler cfq registered (default)
[    2.670921] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    2.671070] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    2.671163] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[    2.671249] pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
[    2.671389] vesafb: mode is 800x600x16, linelength=1600, pages=16
[    2.671391] vesafb: scrolling: redraw
[    2.671394] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.671691] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002200000, using 1875k, total 16384k
[    2.731637] Console: switching to colour frame buffer device 100x37
[    2.790950] fb0: VESA VGA frame buffer device
[    2.791064] GHES: HEST is not enabled!
[    2.791179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.792048] Linux agpgart interface v0.103
[    2.795911] brd: module loaded
[    2.796111] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.817575] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.817584] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.817862] mousedev: PS/2 mouse device common for all mice
[    2.819894] rtc_cmos 00:04: RTC can wake from S4
[    2.820153] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.820186] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.820200] cpuidle: using governor ladder
[    2.820202] cpuidle: using governor menu
[    2.820517] TCP cubic registered
[    2.820520] Registering the dns_resolver key type
[    2.820743] PM: Hibernation image not present or could not be loaded.
[    2.820760] registered taskstats version 1
[    2.821659]   Magic number: 4:846:311
[    2.821804] rtc_cmos 00:04: setting system clock to 2012-07-02 04:20:39 UTC (1341202839)
[    2.821808] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[    2.823684] Freeing unused kernel memory: 744k freed
[    2.824125] Write protecting the kernel read-only data: 10240k
[    2.831176] Freeing unused kernel memory: 1660k freed
[    2.840267] Freeing unused kernel memory: 1996k freed
[    2.851116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.896529] SCSI subsystem initialized
[    2.913197] mpt2sas version 12.100.00.00 loaded
[    2.935951] libata version 3.00 loaded.
[    2.941201] ahci 0000:00:11.0: version 3.0
[    2.941437] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.941442] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    2.942824] scsi0 : ahci
[    2.943186] scsi1 : ahci
[    2.943504] scsi2 : ahci
[    2.943819] scsi3 : ahci
[    2.944098] scsi4 : ahci
[    2.944451] scsi5 : ahci
[    2.944551] ata1: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508100 irq 22
[    2.944555] ata2: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508180 irq 22
[    2.944559] ata3: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508200 irq 22
[    2.944563] ata4: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508280 irq 22
[    2.944568] ata5: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508300 irq 22
[    2.944572] ata6: SATA max UDMA/133 abar m1024@0xd2508000 port 0xd2508380 irq 22
[    3.251072] ata6: SATA link down (SStatus 0 SControl 300)
[    3.251109] ata3: SATA link down (SStatus 0 SControl 300)
[    3.252064] ata5: SATA link down (SStatus 0 SControl 300)
[    3.254030] ata4: SATA link down (SStatus 0 SControl 300)
[    3.404073] ata1: softreset failed (device not ready)
[    3.404987] ata1: applying PMP SRST workaround and retrying
[    3.408048] ata2: softreset failed (device not ready)
[    3.408953] ata2: applying PMP SRST workaround and retrying
[    3.560083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.562042] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[    3.562045] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.563063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.564402] ata1.00: configured for UDMA/133
[    3.564678] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      0001 PQ: 0 ANSI: 5
[    3.576000] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[    3.589726] ata2.00: configured for UDMA/100
[    3.591326] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
[    3.603224] dracut: dracut-017-16.mga2
[    3.611503] loop: module loaded
[    3.614105] dracut: root was mgalive:LABEL=Mageia-2-KDE4-LiveCD, is now mgalive:/dev/disk/by-label/Mageia-2-KDE4-LiveCD
[    3.618420] udevd[98]: starting version 181
[    3.675918] dracut: Starting plymouth daemon
[    4.056345] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[    4.104581] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    4.766761] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    4.770682] acpi device:04: registered as cooling_device0
[    4.770796] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input3
[    4.770804] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    4.790103] sdhci: Secure Digital Host Controller Interface driver
[    4.790108] sdhci: Copyright(c) Pierre Ossman
[    4.791491] sdhci-pci 0000:08:00.0: SDHCI controller found [197b:2382] (rev 0)
[    4.791657] Registered led device: mmc0::
[    4.793242] mmc0: SDHCI controller on PCI [0000:08:00.0] using ADMA
[    4.793267] sdhci-pci 0000:08:00.2: SDHCI controller found [197b:2381] (rev 0)
[    4.793297] sdhci-pci 0000:08:00.2: Refusing to bind to secondary interface.
[    4.799778] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.799835] sd 0:0:0:0: [sda] Write Protect is off
[    4.799839] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.799898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.802826] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.802832] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.803066] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.840042]  sda: sda1 sda2 < sda5 >
[    4.840493] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.841579] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    4.845363] scsi6 : pata_atiixp
[    4.849089] scsi7 : pata_atiixp
[    4.849745] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8000 irq 14
[    4.849749] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8008 irq 15
[    4.854996] usbcore: registered new interface driver usbfs
[    4.855080] usbcore: registered new interface driver hub
[    4.862105] usbcore: registered new device driver usb
[    4.874192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.874295] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    4.874301] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    4.874342] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[    4.874364] QUIRK: Enable AMD PLL fix
[    4.874432] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2507000
[    4.885776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.885780] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.929105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.929110] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.929114] usb usb1: Product: OHCI Host Controller
[    4.929116] usb usb1: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    4.929119] usb usb1: SerialNumber: 0000:00:12.0
[    4.929299] hub 1-0:1.0: USB hub found
[    4.929308] hub 1-0:1.0: 3 ports detected
[    4.929473] ohci_hcd 0000:00:12.1: setting latency timer to 64
[    4.929478] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    4.929490] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
[    4.929518] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2506000
[    4.984089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    4.984093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.984097] usb usb2: Product: OHCI Host Controller
[    4.984099] usb usb2: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    4.984102] usb usb2: SerialNumber: 0000:00:12.1
[    4.985242] hub 2-0:1.0: USB hub found
[    4.985255] hub 2-0:1.0: 3 ports detected
[    4.985420] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    4.985425] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.985436] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
[    4.985479] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2505000
[    5.040117] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.040123] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.040126] usb usb3: Product: OHCI Host Controller
[    5.040129] usb usb3: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    5.040131] usb usb3: SerialNumber: 0000:00:13.0
[    5.040353] hub 3-0:1.0: USB hub found
[    5.040362] hub 3-0:1.0: 3 ports detected
[    5.040747] ohci_hcd 0000:00:13.1: setting latency timer to 64
[    5.040752] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    5.040765] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
[    5.040791] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2504000
[    5.095110] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.095115] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.095118] usb usb4: Product: OHCI Host Controller
[    5.095120] usb usb4: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    5.095123] usb usb4: SerialNumber: 0000:00:13.1
[    5.095338] hub 4-0:1.0: USB hub found
[    5.095346] hub 4-0:1.0: 3 ports detected
[    5.096174] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    5.096180] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    5.096212] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[    5.096270] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.096303] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    5.096321] ehci_hcd 0000:00:12.2: debug port 1
[    5.096527] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2508500
[    5.102061] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    5.102110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    5.102114] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.102117] usb usb5: Product: EHCI Host Controller
[    5.102119] usb usb5: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    5.102122] usb usb5: SerialNumber: 0000:00:12.2
[    5.102354] hub 5-0:1.0: USB hub found
[    5.102360] hub 5-0:1.0: 6 ports detected
[    5.102511] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    5.102515] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    5.102527] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[    5.102537] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.102563] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    5.102579] ehci_hcd 0000:00:13.2: debug port 1
[    5.102610] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2508400
[    5.108058] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    5.108085] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    5.108088] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.108090] usb usb6: Product: EHCI Host Controller
[    5.108092] usb usb6: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    5.108095] usb usb6: SerialNumber: 0000:00:13.2
[    5.108232] hub 6-0:1.0: USB hub found
[    5.108237] hub 6-0:1.0: 6 ports detected
[    5.117249] Uniform Multi-Platform E-IDE driver
[    5.432076] usb 5-1: new high-speed USB device number 2 using ehci_hcd
[    5.661331] usb 5-1: New USB device found, idVendor=0951, idProduct=1606
[    5.661335] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[    5.661338] usb 5-1: Product: DTCR
[    5.661340] usb 5-1: Manufacturer: KINGSTON
[    5.661343] usb 5-1: SerialNumber: 1234567890123456
[    5.663861] usbcore: registered new interface driver uas
[    5.668687] Initializing USB Mass Storage driver...
[    5.668909] scsi8 : usb-storage 5-1:1.0
[    5.669043] usbcore: registered new interface driver usb-storage
[    5.669046] USB Mass Storage support registered.
[    5.763062] usb 5-6: new high-speed USB device number 3 using ehci_hcd
[    5.895292] usb 5-6: New USB device found, idVendor=064e, idProduct=c107
[    5.895295] usb 5-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    5.895298] usb 5-6: Product: HP Webcam
[    5.895300] usb 5-6: Manufacturer: SuYin
[    5.895303] usb 5-6: SerialNumber: CN0314-MM00-MI01-VH-R53.90.01
[    6.672696] scsi 8:0:0:0: Direct-Access     USB2.0   KINGSTON   SD0   0201 PQ: 0 ANSI: 0
[    7.023511] scsi 8:0:0:1: Direct-Access     USB2.0   KINGSTON   SD1   0201 PQ: 0 ANSI: 0
[    7.025279] sd 8:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[    7.027743] sd 8:0:0:0: [sdb] Write Protect is off
[    7.027747] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    7.029220] sd 8:0:0:0: [sdb] No Caching mode page present
[    7.029224] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    7.031025] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[    7.034376] sd 8:0:0:0: [sdb] No Caching mode page present
[    7.034380] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    7.036625]  sdb: sdb1
[    7.040125] sd 8:0:0:0: [sdb] No Caching mode page present
[    7.040130] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    7.040133] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[    7.503908] ISO 9660 Extensions: Microsoft Joliet Level 3
[    7.509404] ISO 9660 Extensions: RRIP_1991A
[    7.519823] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.543643] Registering unionfs 2.5.11 (for 3.3.0-rc3)
[    7.609843] dracut: Mounted root filesystem unionfs
[    7.769073] dracut: Switching root
[    7.771690] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    9.118348] NET: Registered protocol family 10
[   10.222243] udevd[263]: starting version 181
[   11.502448] ACPI: AC Adapter [ACAD] (on-line)
[   11.503847] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   11.503855] ACPI: Power Button [PWRB]
[   11.503940] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.504064] ACPI: Lid Switch [LID]
[   11.504121] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   11.504125] ACPI: Power Button [PWRF]
[   12.019477] thermal LNXTHERM:00: registered as thermal_zone0
[   12.019482] ACPI: Thermal Zone [TZ01] (78 C)
[   12.063059] wmi: Mapper loaded
[   12.213161] ACPI: Battery Slot [BAT0] (battery present)
[   12.231605] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.513033] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   12.513128] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[   12.541164] vboxguest: VirtualBox Guest PCI device not found.
[   12.678692] lib80211: common routines for IEEE802.11 drivers
[   12.678713] lib80211_crypt: registered algorithm 'NULL'
[   12.799764] hp_accel: laptop model unknown, using default axes configuration
[   12.800409] lis3lv02d: 8 bits sensor found
[   12.801270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.830495] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   12.830499] ene_ir: PLL freq = 1406
[   12.830501] ene_ir: KB3926C detected
[   12.830515] ene_ir: Firmware regs: c1 04
[   12.830516] ene_ir: Hardware features:
[   12.830518] ene_ir: * Uses GPIO 40 for IR demodulated input
[   12.845863] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   12.846095] Registered led device: hp::hddprotect
[   12.846122] hp_accel: driver loaded
[   12.849817] IR NEC protocol handler initialized
[   12.855165] IR RC5(x) protocol handler initialized
[   12.869300] IR RC6 protocol handler initialized
[   12.884025] Registered IR keymap rc-rc6-mce
[   12.884147] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   12.884376] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   12.885958] ene_ir: driver has been successfully loaded
[   12.975575] wl: module license 'unspecified' taints kernel.
[   12.975581] Disabling lock debugging due to kernel taint
[   13.057112] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   13.057254] r8169 0000:0a:00.0: irq 44 for MSI/MSI-X
[   13.057821] r8169 0000:0a:00.0: eth1: RTL8102e at 0xffffc90000668000, 00:23:5a:1b:f2:a8, XID 04a00000 IRQ 44
[   13.121318] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   13.156301] lib80211_crypt: registered algorithm 'TKIP'
[   13.156701] eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[   13.188894] IR JVC protocol handler initialized
[   13.194327] IR Sony protocol handler initialized
[   13.279373] IR SANYO protocol handler initialized
[   13.327485] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[   13.327578] IR MCE Keyboard/mouse protocol handler initialized
[   13.519932] lirc_dev: IR Remote Control driver registered, major 252
[   13.578224] Linux media interface: v0.10
[   13.660630] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   13.660634] IR LIRC bridge handler initialized
[   13.669349] Linux video capture interface: v2.00
[   13.980552] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[   14.039293] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb5/5-6/5-6:1.0/input/input10
[   14.039375] usbcore: registered new interface driver uvcvideo
[   14.039378] USB Video Class driver (1.1.1)
[   14.237776] hda-intel: Using LPIB position fix
[   14.237827] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[   14.251526] hda-intel: Enable sync_write for stable communication
[   14.352880] mute LED gpio 1 polarity 1
[   14.352899] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   14.352902]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.352904]    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   14.352906]    mono: mono_out=0x0
[   14.352907]    inputs: Mic=0xb
[   14.353253] stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
[   14.547364] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   14.547473] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   14.547725] hda-intel: Using LPIB position fix
[   14.547795] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[   14.551092] hda-intel: Enable sync_write for stable communication
[   14.827217] input: HP WMI hotkeys as /devices/virtual/input/input13
[   16.650340] device-mapper: uevent: version 1.0.3
[   16.650482] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   22.509275] unionfs: new lower inode mtime (bindex=0, name=harddrake2)
[   27.694805] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[   27.706920] ide-gd driver 1.18
[   34.143293] usbcore: registered new interface driver usbhid
[   34.143298] usbhid: USB HID core driver
[   53.941758] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   54.169828] [fglrx] Maximum main memory to use for locked dma buffers: 3546 MBytes.
[   54.169938] [fglrx]   vendor: 1002 device: 9612 count: 1
[   54.170677] [fglrx] ioport: bar 1, base 0x7000, size: 0x100
[   54.170695] pci 0000:01:05.0: power state changed by ACPI to D0
[   54.170699] pci 0000:01:05.0: power state changed by ACPI to D0
[   54.170711] pci 0000:01:05.0: setting latency timer to 64
[   54.171365] [fglrx] Kernel PAT support is enabled
[   54.171393] [fglrx] module loaded - fglrx 8.96.4 [Apr  5 2012] with 1 minors
[   61.134275] microcode: CPU0: patch_level=0x02000032
[   61.264062] microcode: failed to load file amd-ucode/microcode_amd.bin
[   61.264085] microcode: CPU1: patch_level=0x02000032
[   61.264853] microcode: failed to load file amd-ucode/microcode_amd.bin
[   61.264913] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   61.772190] microcode: Microcode Update Driver: v2.00 removed.
[   64.648355] [fglrx] ATIF platform detected with notification ID: 0x81
[   64.831461] [fglrx] GART Table is not in FRAME_BUFFER range
[   64.832640] [fglrx] Could not enable MSI; System prevented initialization
[   64.842095] [fglrx] Firegl kernel thread PID: 1144
[   64.846634] [fglrx] Firegl kernel thread PID: 1147
[   64.847870] [fglrx] Firegl kernel thread PID: 1149
[   64.848113] [fglrx] IRQ 18 Enabled
[   65.146555] unionfs: new lower inode mtime (bindex=0, name=ati)
[   65.210465] r8169 0000:0a:00.0: eth1: link down
[   65.215126] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   65.385356] [fglrx] Gart USWC size:1160 M.
[   65.385361] [fglrx] Gart cacheable size:459 M.
[   65.385366] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   65.385369] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[   70.147556] ip_tables: (C) 2000-2006 Netfilter Core Team
[   72.073817] Netfilter messages via NETLINK v0.30.
[   72.314972] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   73.455312] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   73.456874] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   73.456880] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   73.686564] ctnetlink v0.93: registering with nfnetlink.
[   74.166839] ip_set: protocol 6
[   74.237565] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   75.776345] xt_time: kernel timezone is -0000
[   76.078099] Bridge firewalling registered
[   76.347451] u32 classifier
[   76.347454]     Actions configured
[   76.565034] netfilter PSD loaded - (c) astaro AG
[   76.568381] IFWLOG: register target
[   78.225865] unionfs: new lower inode mtime (bindex=0, name=etc)
[   94.332364] unionfs: new lower inode mtime (bindex=0, name=sysconfig)
[   94.717132] unionfs: new lower inode mtime (bindex=0, name=30osvendor)
[   94.753632] unionfs: new lower inode mtime (bindex=0, name=boot)
[  100.927302] unionfs: new lower inode mtime (bindex=0, name=sysconfig)
[  103.551732] fuse init (API version 7.18)
[  128.692335] unionfs: new lower inode mtime (bindex=0, name=log)
[  138.123954] unionfs: new lower inode mtime (bindex=0, name=live)
[  163.569525] r8169 0000:0a:00.0: eth1: link up
[  163.570283] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  166.659309] NET: Registered protocol family 17
[  174.402053] eth1: no IPv6 routers present
[  396.594071] eth0: no IPv6 routers present
[  445.757808] r8169 0000:0a:00.0: eth1: link down
[  453.203906] r8169 0000:0a:00.0: eth1: link down
[  453.204728] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  459.452419] r8169 0000:0a:00.0: eth1: link up
[  459.453132] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  469.978074] eth1: no IPv6 routers present
[  489.794294] unionfs: new lower inode mtime (bindex=0, name=etc)
[  489.806330] unionfs: new lower inode mtime (bindex=0, name=sysconfig)
[  511.282073] eth0: no IPv6 routers present
[  572.517073] zcip uses obsolete (PF_INET,SOCK_PACKET)
[  572.525078] device eth0 entered promiscuous mode
[  580.542250] device eth0 left promiscuous mode


& the output of

iwconfig eth1
iwlist scan eth1

[live@localhost ~]$ dmesg > dmesg.log
[live@localhost ~]$ iwconfig eth1
bash: iwconfig: command not found
[live@localhost ~]$ iwlist scan eth1
bash: iwlist: command not found
[live@localhost ~]$
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby doktor5000 » Jul 2nd, '12, 18:02

You need to run both commands as root.
Code: Select all
su -

in a terminal gets you there.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 15009
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: broadcom 4312 chipset

Postby Garthhh » Jul 2nd, '12, 20:02

[live@localhost ~]$ su iwconfig eth1
su: user iwconfig does not exist
[live@localhost ~]$
[live@localhost ~]$ su iwlist scan eth1
su: user iwlist does not exist
[live@localhost ~]$

same problem
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby doktor5000 » Jul 2nd, '12, 20:10

You didn't do what i posted, you did something else. Just compare what i posted and what you did. Proudly terminalphobic or not, if i give you some help and you don't do what is suggested, we can't really help you properly.

For a short explanation:
su is short for switch user, if called with no username after it, the default is to switch to root user.
a - behind su means to also initalize environment variables (i.e. initialize a login shell instead ob using a subshell, but this detail doesn't matter in your case).

So, the terminal correctly interprets your commands as switch to user iwconfig or switch to user iwlist, as it clearly tells you there is no such user.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 15009
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: broadcom 4312 chipset

Postby martinw » Jul 2nd, '12, 20:50

One of the problems you are having is interface swapping - in the last dmesg output you posted, your wireless interface has become eth0 and your wired interface has become eth1. I don't know any way to stop this happening if you are using a live CD (admittedly, I've never used a live CD...), so instead of the commands I previously suggested, just do:
Code: Select all
su -
<you'll be prompted to enter your root password here>
iwconfig
iwlist scan
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Re: broadcom 4312 chipset

Postby Garthhh » Jul 2nd, '12, 21:35

after trying to configure the wireless connection, [connection failed]
ran su [no prompt fo password]
ran iwconfig
result
Code: Select all
lo        no wireless extensions.

eth1      IEEE 802.11bg  ESSID:"STI-30274"  Nickname:"localhos"
          Mode:Managed  Frequency:2.437 GHz  Access Point: Not-Associated   
          Bit Rate:54 Mb/s   Tx-Power:24 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=5/5  Signal level=-31 dBm  Noise level=-57 dBm
          Rx invalid nwid:0  Rx invalid crypt:19  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

eth0      no wireless extensions.



ran iwlist scan

result

Code: Select all
lo        Interface doesn't support scanning.

eth1      Scan completed :
          Cell 01 - Address: CC:5D:4E:7B:C5:84
                    ESSID:"STI-30274"
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality:5/5  Signal level:-31 dBm  Noise level:-92 dBm
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
                              12 Mb/s; 48 Mb/s

eth0      Interface doesn't support scanning.


I'm not sure why dok feels the need to go off on me
by now I would think he would be well aware of how very little skill I have for understanding or retaining any of this stuff
Sorry my Experience doesn't meet your Expectations, I'll try Harder in the Future
User avatar
Garthhh
 
Posts: 438
Joined: Jun 2nd, '11, 19:27
Location: Yosemite

Re: broadcom 4312 chipset

Postby doktor5000 » Jul 2nd, '12, 21:59

Garthhh wrote:I'm not sure why dok feels the need to go off on me
by now I would think he would be well aware of how very little skill I have for understanding or retaining any of this stuff


Sorry? I didn't go off on noone, just tried to mention that you didn't copy&paste a command which was posted.
And then i tried to explain it to you. Ahh :x whatever i say some people always misunderstand it.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 15009
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: broadcom 4312 chipset

Postby isadora » Jul 3rd, '12, 07:09

Come on guys, you know the doktor, don't you.
Then at least, take some time for his signature, it 's all self-explaining.

Keep the good work up doktor5000!!!
..........bird from paradise..........

Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.
—Antoine de Saint-Exupéry
User avatar
isadora
 
Posts: 2506
Joined: Mar 25th, '11, 16:03
Location: Amsterdam, the Netherlands

Re: broadcom 4312 chipset

Postby martinw » Jul 4th, '12, 21:49

My best guess is that it is an encryption problem. Can you post the output of
Code: Select all
su
cat /etc/sysconfig/network-scripts/ifcfg-eth1

(change eth1 to eth0 if your wireless device has come up as eth0) - but please X out your wireless encryption key before posting!

Also, could you try briefly disabling encryption in your access point, just to see if you can then get a connection?

Having said this, I had a lot of trouble getting my Broadcom wireless card to work during the Mageia 2 alpha/beta testing. Sometimes only the wl driver would work. Sometimes only the brcmsmac driver would work. Sometimes nothing would work. I eventually solved the problem by replacing the card with an Intel one!
martinw
 
Posts: 515
Joined: May 14th, '11, 10:59

Next

Return to Networking

Who is online

Users browsing this forum: No registered users and 1 guest