Ruhezustand / hibernate / suspend-to-disk

[mhausle]

Hallo,

ich habe letzte Woche meinen neuen HP Elitebook X360 G6 in Betrieb genommen - einfach durch SSD Tausch aus dem älteren G2.
Leider funktioniert hier der Ruhezustand nicht - trotz mehrere Versuche, die BIOS Einstellungen anzupassen.

Jetzt habe ich mal versucht, das Log zu verstehen, scheitere aber.

Console:

Code: Alles auswählen

systemctl hibernate

System beginnt scheinbar runter zu fahren, kurz schwarz, wacht fast sofort wieder auf, dauert eine Weile, dann stehe ich wieder am Anmeldebildschirm.
Anmelden und Console:

Code: Alles auswählen

dmesg

zeigt mir:

Code: Alles auswählen

[13358.188253] PM: hibernation: hibernation entry
[13358.204254] Filesystems sync: 0.007 seconds
[13358.204643] Freezing user space processes
[13358.206570] Freezing user space processes completed (elapsed 0.001 seconds)
[13358.206575] OOM killer disabled.
[13358.206910] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[13358.206915] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[13358.206918] PM: hibernation: Marking nosave pages: [mem 0x8e607000-0x8e64ffff]
[13358.206922] PM: hibernation: Marking nosave pages: [mem 0x92f28000-0x93c0efff]
[13358.206982] PM: hibernation: Marking nosave pages: [mem 0x93c10000-0xffffffff]
[13358.209210] PM: hibernation: Basic memory bitmaps created
[13358.209308] PM: hibernation: Preallocating image memory
[13359.413203] PM: hibernation: Allocated 2810551 pages for snapshot
[13359.413207] PM: hibernation: Allocated 11242204 kbytes in 1.20 seconds (9368.50 MB/s)
[13359.413211] Freezing remaining freezable tasks
[13359.414638] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[13359.428359] printk: Suspending console(s) (use no_console_suspend to debug)
[13359.428640] wlp109s0: deauthenticating from bc:05:43:6a:e6:dd by local choice (Reason: 3=DEAUTH_LEAVING)
[13359.439670] ata3.00: Entering standby power mode
[13360.970552] ACPI: EC: interrupt blocked
[13360.975455] ACPI: PM: Preparing to enter system sleep state S4
[13361.031961] ACPI: EC: event blocked
[13361.031963] ACPI: EC: EC stopped
[13361.031964] ACPI: PM: Saving platform NVS memory
[13361.032475] Disabling non-boot CPUs ...
[13361.033932] smpboot: CPU 1 is now offline
[13361.035864] smpboot: CPU 2 is now offline
[13361.037808] smpboot: CPU 3 is now offline
[13361.040249] smpboot: CPU 4 is now offline
[13361.042588] smpboot: CPU 5 is now offline
[13361.044267] smpboot: CPU 6 is now offline
[13361.046054] smpboot: CPU 7 is now offline
[13361.049173] PM: hibernation: Creating image:
[13361.671272] PM: hibernation: Need to copy 2803954 pages
[13361.671276] PM: hibernation: Normal pages needed: 2803954 + 1024, available pages: 5528428
[13364.309276] PM: hibernation: Image created (2803954 pages copied)
[13361.049767] ACPI: PM: Restoring platform NVS memory
[13361.049879] ACPI: EC: EC started
[13361.050833] Enabling non-boot CPUs ...
[13361.050864] smpboot: Booting Node 0 Processor 1 APIC 0x2
[13361.051903] CPU1 is up
[13361.051928] smpboot: Booting Node 0 Processor 2 APIC 0x4
[13361.052999] CPU2 is up
[13361.053017] smpboot: Booting Node 0 Processor 3 APIC 0x6
[13361.054062] CPU3 is up
[13361.054081] smpboot: Booting Node 0 Processor 4 APIC 0x1
[13361.055292] CPU4 is up
[13361.055315] smpboot: Booting Node 0 Processor 5 APIC 0x3
[13361.056374] CPU5 is up
[13361.056395] smpboot: Booting Node 0 Processor 6 APIC 0x5
[13361.057474] CPU6 is up
[13361.057493] smpboot: Booting Node 0 Processor 7 APIC 0x7
[13361.058589] CPU7 is up
[13361.063586] ACPI: PM: Waking up from system sleep state S4
[13361.135627] ACPI: EC: interrupt unblocked
[13361.150816] ACPI: EC: event unblocked
[13361.461543] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13361.461549] ata3.00: Entering active power mode
[13361.462663] ata3.00: ACPI cmd f5/00:00:00:00:00:e0(SECURITY FREEZE LOCK) filtered out
[13361.462669] ata3.00: supports DRM functions and may not be fully accessible
[13361.464450] ata3.00: ACPI cmd f5/00:00:00:00:00:e0(SECURITY FREEZE LOCK) filtered out
[13361.464456] ata3.00: supports DRM functions and may not be fully accessible
[13361.465448] ata3.00: configured for UDMA/133
[13361.556083] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[13361.557011] PM: Using 3 thread(s) for compression
[13361.557015] PM: Compressing and saving image data (2809431 pages)...
[13361.557038] PM: Image saving progress:   0%
[13363.695178] PM: Image saving progress:  10%
[13365.920274] PM: Image saving progress:  20%
[13368.125572] PM: Image saving progress:  30%
[13370.198067] PM: Image saving progress:  40%
[13372.110080] PM: Image saving progress:  50%
[13373.994057] PM: Image saving progress:  60%
[13376.016190] PM: Image saving progress:  70%
[13377.813052] PM: Image saving progress:  80%
[13379.519064] PM: hibernation: Wrote 11237724 kbytes in 17.96 seconds (625.70 MB/s)
[13380.126592] PM: hibernation: Basic memory bitmaps freed
[13380.126748] pci_bus 0000:04: Allocating resources
[13380.126768] pci_bus 0000:38: Allocating resources
[13380.126967] OOM killer enabled.
[13380.126969] Restarting tasks ...
[13380.127180] pcieport 0000:00:1d.0: PCI bridge to [bus 6d]
[13380.127196] pcieport 0000:00:1d.0:   bridge window [mem 0xe0000000-0xe00fffff]
[13380.127273] pci_bus 0000:04: Allocating resources
[13380.127291] pci_bus 0000:38: Allocating resources
[13380.132189] done.
[13380.177645] PM: hibernation: hibernation exit
[13383.806436] wlp109s0: authenticate with bc:05:43:6a:e6:dd
[13383.823375] wlp109s0: send auth to bc:05:43:6a:e6:dd (try 1/3)
[13383.887234] wlp109s0: authenticated
[13383.887255] wlp109s0: VHT capa missing/short, disabling VHT/HE/EHT
[13383.887559] wlp109s0: associate with bc:05:43:6a:e6:dd (try 1/3)
[13383.892055] wlp109s0: RX AssocResp from bc:05:43:6a:e6:dd (capab=0x411 status=0 aid=2)
[13383.944367] wlp109s0: associated
[13383.980177] wlp109s0: Limiting TX power to 20 (23 - 3) dBm as advertised by bc:05:43:6a:e6:dd


Was läuft da nicht, wie es sein sollte?
Freue mich auf Unterstützung.

[doktor5000]

Probier mal ob das einen Unterschied macht, ob du aus dem Startmenü Tiefschlaf oder Standby aufrufst, statt systemctl hibernate
Ist bei mir wechselweise so, entweder via systemctl suspend-then-hibernate oder aus dem Startmenü genau so wie du bei dir beschreibst - Kiste geht kurz aus, dann direkt wieder an und wieder zum Login-Manager.

[mhausle]

Moin,

mein Eindruck ist, dass der Ruhezustand aus dem Startmenü heraus inzwischen funktioniert (ich hatte vor ein paar Tagen noch einmal im BIOS "gespielt").
In den Start => Werkzeuge => Systemeinstellungen => Energieverwaltung => Reiter Im Akkubetrieb ist bei Deckel schließen derzeit Herunterfahren eingestellt. Bei Neustart bleibt der Bildschirm dann dunkel (lange über probieren herausgetestet) => nur ein "Doppleklick" mit Strg+Alt+Backspace bringt den Anmeldebildschirm zurück.

Test mit Energieverwaltung => Reiter Im Akkubetrieb => Deckel schließen => Ruhezustand folgt noch einmal.
Hier die Ausgabe von dmesg - es scheint nun inzwischen doch zu funktionieren...:

Code: Alles auswählen

[ 1158.559213] PM: hibernation: hibernation entry
[ 1158.602033] Filesystems sync: 0.030 seconds
[ 1158.602270] Freezing user space processes
[ 1158.604638] Freezing user space processes completed (elapsed 0.002 seconds)
[ 1158.604646] OOM killer disabled.
[ 1158.605044] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 1158.605051] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 1158.605057] PM: hibernation: Marking nosave pages: [mem 0x8e85d000-0x8e8a5fff]
[ 1158.605063] PM: hibernation: Marking nosave pages: [mem 0x92f28000-0x93c0efff]
[ 1158.605162] PM: hibernation: Marking nosave pages: [mem 0x93c10000-0xffffffff]
[ 1158.608880] PM: hibernation: Basic memory bitmaps created
[ 1158.609000] PM: hibernation: Preallocating image memory
[ 1159.688149] PM: hibernation: Allocated 1908716 pages for snapshot
[ 1159.688153] PM: hibernation: Allocated 7634864 kbytes in 1.07 seconds (7135.38 MB/s)
[ 1159.688157] Freezing remaining freezable tasks
[ 1159.689327] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 1159.701628] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1159.701898] wlp109s0: deauthenticating from 34:31:c4:9b:30:14 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1159.712471] ata3.00: Entering standby power mode
[ 1160.264150] iosm 0000:01:00.0: msg timeout
[ 1161.262910] ACPI: EC: interrupt blocked
[ 1161.267768] ACPI: PM: Preparing to enter system sleep state S4
[ 1161.323288] ACPI: EC: event blocked
[ 1161.323290] ACPI: EC: EC stopped
[ 1161.323291] ACPI: PM: Saving platform NVS memory
[ 1161.323779] Disabling non-boot CPUs ...
[ 1161.325278] smpboot: CPU 1 is now offline
[ 1161.327222] smpboot: CPU 2 is now offline
[ 1161.329317] smpboot: CPU 3 is now offline
[ 1161.331309] smpboot: CPU 4 is now offline
[ 1161.333622] smpboot: CPU 5 is now offline
[ 1161.335343] smpboot: CPU 6 is now offline
[ 1161.337305] smpboot: CPU 7 is now offline
[ 1161.340215] PM: hibernation: Creating image:
[ 1162.025484] PM: hibernation: Need to copy 1894152 pages
[ 1162.025488] PM: hibernation: Normal pages needed: 1894152 + 1024, available pages: 6438231
[ 1161.340583] ACPI: PM: Restoring platform NVS memory
[ 1161.340690] ACPI: EC: EC started
[ 1161.341717] Enabling non-boot CPUs ...
[ 1161.341748] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1161.342757] CPU1 is up
[ 1161.342783] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 1161.343799] CPU2 is up
[ 1161.343819] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 1161.344838] CPU3 is up
[ 1161.344857] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 1161.346102] CPU4 is up
[ 1161.346128] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 1161.347167] CPU5 is up
[ 1161.347186] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 1161.348242] CPU6 is up
[ 1161.348261] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 1161.349354] CPU7 is up
[ 1161.354321] ACPI: PM: Waking up from system sleep state S4
[ 1161.426584] ACPI: EC: interrupt unblocked
[ 1161.443840] intel_ish_ipc 0000:00:13.0: reset: wrong host start response
[ 1161.774723] usb usb1: root hub lost power or was reset
[ 1161.774729] usb usb2: root hub lost power or was reset
[ 1161.775917] ACPI: EC: event unblocked
[ 1161.776194] usb usb3: root hub lost power or was reset
[ 1161.776202] usb usb4: root hub lost power or was reset
[ 1162.042363] usb 1-9: reset high-speed USB device number 5 using xhci_hcd
[ 1162.089249] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1162.089254] ata3.00: Entering active power mode
[ 1162.090391] ata3.00: ACPI cmd f5/00:00:00:00:00:e0(SECURITY FREEZE LOCK) filtered out
[ 1162.090398] ata3.00: supports DRM functions and may not be fully accessible
[ 1162.092215] ata3.00: ACPI cmd f5/00:00:00:00:00:e0(SECURITY FREEZE LOCK) filtered out
[ 1162.092221] ata3.00: supports DRM functions and may not be fully accessible
[ 1162.093102] ata3.00: configured for UDMA/133
[ 1162.275232] iosm 0000:01:00.0: msg timeout
[ 1162.439306] usb 1-1: reset low-speed USB device number 2 using xhci_hcd
[ 1162.822209] usb 1-10: reset full-speed USB device number 6 using xhci_hcd
[ 1162.910939] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=4
[ 1162.958835] PM: hibernation: Basic memory bitmaps freed
[ 1162.958875] pcieport 0000:00:1c.0: PCI bridge to [bus 01]
[ 1162.958885] pcieport 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe01fffff]
[ 1162.958978] pci_bus 0000:04: Allocating resources
[ 1162.958996] pci_bus 0000:38: Allocating resources
[ 1162.959311] OOM killer enabled.
[ 1162.959313] Restarting tasks ...
[ 1162.959350] usb 1-8: USB disconnect, device number 8
[ 1162.959369] pcieport 0000:00:1d.0: PCI bridge to [bus 6d]
[ 1162.959379] pcieport 0000:00:1d.0:   bridge window [mem 0xe0000000-0xe00fffff]
[ 1162.960336] pci_bus 0000:04: Allocating resources
[ 1162.960355] pci_bus 0000:38: Allocating resources
[ 1162.961236] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 1162.965491] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[ 1162.966492] Bluetooth: hci0: Device revision is 1
[ 1162.966498] Bluetooth: hci0: Secure boot is enabled
[ 1162.966500] Bluetooth: hci0: OTP lock is enabled
[ 1162.966502] Bluetooth: hci0: API lock is enabled
[ 1162.966504] Bluetooth: hci0: Debug lock is disabled
[ 1162.966506] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 1162.967615] done.
[ 1162.977432] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[ 1162.977612] Bluetooth: hci0: Boot Address: 0x24800
[ 1162.977616] Bluetooth: hci0: Firmware Version: 255-255.255
[ 1163.028362] PM: hibernation: hibernation exit
[ 1163.072906] usb 1-8: new full-speed USB device number 9 using xhci_hcd
[ 1163.200505] usb 1-8: New USB device found, idVendor=06cb, idProduct=00b7, bcdDevice= 1.64
[ 1163.200520] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 1163.200527] usb 1-8: SerialNumber: bab59486149d
[ 1164.910638] Bluetooth: hci0: Waiting for firmware download to complete
[ 1164.911525] Bluetooth: hci0: Firmware loaded in 1889246 usecs
[ 1164.911599] Bluetooth: hci0: Waiting for device to boot
[ 1164.926546] Bluetooth: hci0: Device booted in 14666 usecs
[ 1164.926575] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[ 1164.926589] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[ 1164.928625] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 1164.929579] Bluetooth: hci0: Firmware revision 0.3 build 249 week 27 2023
[ 1164.931624] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[ 1164.998770] Bluetooth: MGMT ver 1.22
[ 1166.306668] psmouse serio3: synaptics: queried max coordinates: x [..5658], y [..4710]
[ 1166.347894] psmouse serio3: synaptics: queried min coordinates: x [1286..], y [1144..]
[ 1166.474509] wlp109s0: authenticate with 34:31:c4:9b:30:14
[ 1166.474526] wlp109s0: 80 MHz not supported, disabling VHT
[ 1166.483542] wlp109s0: send auth to 34:31:c4:9b:30:14 (try 1/3)
[ 1166.530068] wlp109s0: authenticated
[ 1166.531093] wlp109s0: associate with 34:31:c4:9b:30:14 (try 1/3)
[ 1166.535974] wlp109s0: RX AssocResp from 34:31:c4:9b:30:14 (capab=0x1431 status=0 aid=2)
[ 1166.601148] wlp109s0: associated
[ 1166.601175] wlp109s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 34:31:c4:9b:30:14


[mhausle]

Hi,
das neue Notebook hat 32GB RAM, die Swap Partititon ist "nur" 4 GB groß.
Nach einigem weiteren Lesen gehen ich mal davon aus, dass hibernate im Swap abgelegt wird und es daher so nicht (mehr) funktionieren kann.
Sieht so aus als müsste ich
a) die Swap-Partition vergrößern (was auch meiner Sich bei 32GB RAM wenig Sinn macht, da vermutlich meist ungenutzt außer für hibernate) oder
b) hibernate to swap file(!) konfigurieren.
=> b) klingt mir sinnvoll, aber ich habe keine Idee davon. Hat das schon mal jemand erfolgreich gemacht?
LG

EDIT:
noch NIE vorher, aber jetzt auch die entsprechende Meldung - als hätte der Rechner gemerkt, dass ich mich schlau gemacht habe...

Code: Alles auswählen

[xxx@xxx]$ systemctl hibernate
Call to Hibernate failed: Not enough swap space for hibernation


[doktor5000]

Nicht hibernate to swapfile, du müsstest einfach noch zusätzlich ein swapfile anlegen.
Siehe https://wiki.archlinux.org/title/swap#Swap_file