[gelöst] Mageia startet mal wieder nicht nach installation

Dieses Forum dient der grundlegenden Hilfe und Unterstützung :

Stelle hier Deine Fragen zur Grundinstallation und zur Benutzung von Mageia. Beispielsweise gehören hierhin Fragen zum Download der ISOs und deren Installation, zur Einrichtung des Druckers, Benutzung der Textbearbeitung, usw.

Bitte versuche, Deine Fragen im richtigen Subforum zu stellen und gib dabei so viele Informtionen wie möglich. Je präziser die Frage gestellt wird, um so eher bekommst Du eine hilfreiche Antwort.

[gelöst] Mageia startet mal wieder nicht nach installation

Beitragvon jkowalzik » Sep 5th, '15, 11:29

Hallo!

Eigentlich sollte ich bei einer bewährten Methode bleiben, DVD runter laden und damit von MGA4 nach MGA5 wechseln. Aber ich dachte mir: "Versuch macht kluch" und habe die grafische Methode, die als blau-weißer Pfeil in der Taskleiste angeboten wird, gewählt.
Vorgang lief anstandslos durch, aber beim erneuten booten... :mrgreen:
Die letzte Zeile im Startbildschirm war:
Code: Alles auswählen
 [OK] Started Update UTPM about System Runlevel Changes
...und dann stand die Kiste gestern.
Also habe ich zum heutigen Frühstück mein "kleines Knopperchen" ausgepackt um an /var/log/boot.log heran zu kommen:
Code: Alles auswählen
?%G?%G
Welcome to ?[1;36mMageia 5?[0m!

[?[32m  OK  ?[0m] Reached target RPC Port Mapper.
[?[32m  OK  ?[0m] Reached target Login Prompts.
[?[32m  OK  ?[0m] Reached target Remote File Systems.
[?[32m  OK  ?[0m] Reached target Encrypted Volumes.
[?[32m  OK  ?[0m] Set up automount Arbitrary Executable File Formats File System Automount Point.
         Expecting device dev-disk-by\x2duuid-1dfc07ea...\x2d48e2\x2d9bdf\x2d5e0e8dcf22a2.device...
         Expecting device dev-disk-by\x2duuid-3a34c063...\x2d40b9\x2d8450\x2d212dd85c6624.device...
         Expecting device dev-disk-by\x2duuid-240c27dc...\x2d4658\x2d97b2\x2ddb670e145956.device...
         Expecting device dev-disk-by\x2duuid-4A9065C175608C7E.device...
         Expecting device dev-disk-by\x2duuid-325898CD58989169.device...
         Expecting device dev-disk-by\x2duuid-0C18B3BC18B3A35E.device...
[?[32m  OK  ?[0m] Created slice Root Slice.
[?[32m  OK  ?[0m] Created slice User and Session Slice.
[?[32m  OK  ?[0m] Listening on /dev/initctl Compatibility Named Pipe.
[?[32m  OK  ?[0m] Listening on Delayed Shutdown Socket.
[?[32m  OK  ?[0m] Listening on Journal Socket (/dev/log).
[?[32m  OK  ?[0m] Listening on udev Kernel Socket.
[?[32m  OK  ?[0m] Listening on udev Control Socket.
[?[32m  OK  ?[0m] Listening on Journal Socket.
[?[32m  OK  ?[0m] Created slice System Slice.
[?[32m  OK  ?[0m] Created slice system-getty.slice.
[?[32m  OK  ?[0m] Created slice system-systemd\x2dfsck.slice.
         Mounting Temporary Directory...
         Starting Remount Root and Kernel File Systems...
         Starting Load legacy module configuration...
         Mounting POSIX Message Queue File System...
         Mounting Huge Pages File System...
         Starting Create list of required static device nodes for the current kernel...
         Starting Setup Virtual Console...
         Mounting Debug File System...
?%G         Starting Load Kernel Modules...
         Starting udev Coldplug all Devices...
         Starting Journal Service...
[?[32m  OK  ?[0m] Reached target Slices.
[?[32m  OK  ?[0m] Mounted Huge Pages File System.
[?[32m  OK  ?[0m] Mounted POSIX Message Queue File System.
[?[32m  OK  ?[0m] Mounted Temporary Directory.
[?[32m  OK  ?[0m] Started Remount Root and Kernel File Systems.
[?[32m  OK  ?[0m] Started Create list of required static device nodes for the current kernel.
[?[32m  OK  ?[0m] Started Setup Virtual Console.
[?[32m  OK  ?[0m] Mounted Debug File System.
         Starting Create Static Device Nodes in /dev...
         Starting Configure read-only root support...
[?[32m  OK  ?[0m] Started Load Kernel Modules.
         Starting Apply Kernel Variables...
[?[32m  OK  ?[0m] Started udev Coldplug all Devices.
         Starting Show Plymouth Boot Screen...
         Starting udev Wait for Complete Device Initialization...
[?[32m  OK  ?[0m] Started Apply Kernel Variables.
[?[32m  OK  ?[0m] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[?[32m  OK  ?[0m] Reached target Local File Systems (Pre).
[?[32m  OK  ?[0m] Started Show Plymouth Boot Screen.
[?[32m  OK  ?[0m] Started Configure read-only root support.
         Starting Load/Save Random Seed...
[?[32m  OK  ?[0m] Started Load/Save Random Seed.
[?[1;31mFAILED?[0m] Failed to start Load legacy module configuration.
See "systemctl status fedora-loadmodules.service" for details.
[?[32m  OK  ?[0m] Started udev Kernel Device Manager.
[?[32m  OK  ?[0m] Started Journal Service.
         Starting Trigger Flushing of Journal to Persistent Storage...
[?[32m  OK  ?[0m] Started Trigger Flushing of Journal to Persistent Storage.
[?[32m  OK  ?[0m] Found device SAMSUNG_HD753LJ win_3.
         Mounting /media/win_c2...
?%G[?[32m  OK  ?[0m] Found device SanDisk_SDSSDP128G win_c.
         Mounting /media/win_c3...
[?[32m  OK  ?[0m] Reached target Sound Card.
[?[32m  OK  ?[0m] Mounted /media/win_c3.
         Mounting FUSE Control File System...
[?[32m  OK  ?[0m] Mounted FUSE Control File System.
[?[32m  OK  ?[0m] Found device Hitachi_HDS723020BLE640 /heim/user.
         Starting File System Check on /dev/disk/by-uuid/3a34c063-6b30-40b9-8450-212dd85c6624...
[?[32m  OK  ?[0m] Found device Hitachi_HDS723020BLE640 swap.
         Activating swap /dev/disk/by-uuid/1dfc07ea-62f8-48e2-9bdf-5e0e8dcf22a2...
[?[32m  OK  ?[0m] Found device Hitachi_HDS723020BLE640 /heim.
         Starting File System Check on /dev/disk/by-uuid/240c27dc-6442-4658-97b2-db670e145956...
[?[32m  OK  ?[0m] Found device Hitachi_HDS723020BLE640 win_d.
         Mounting /media/win_c...
[?[32m  OK  ?[0m] Activated swap /dev/disk/by-uuid/1dfc07ea-62f8-48e2-9bdf-5e0e8dcf22a2.
[?[32m  OK  ?[0m] Reached target Swap.
[?[32m  OK  ?[0m] Mounted /media/win_c2.
[?[32m  OK  ?[0m] Mounted /media/win_c.
[    7.451198] systemd-fsck[658]: /heim/user: clean, 2440/51208192 files, 153181351/204800628 blocks
[?[32m  OK  ?[0m] Started File System Check on /dev/disk/by-uuid/3a34c063-6b30-40b9-8450-212dd85c6624.
[?[32m  OK  ?[0m] Started udev Wait for Complete Device Initialization.
         Starting Wait for storage scan...
[    7.863103] systemd-fsck[662]: /heim: clean, 126055/51208192 files, 171633427/204800628 blocks
[?[32m  OK  ?[0m] Started Wait for storage scan.
[?[32m  OK  ?[0m] Started File System Check on /dev/disk/by-uuid/240c27dc-6442-4658-97b2-db670e145956.
         Mounting /home...
[?[32m  OK  ?[0m] Mounted /home.
         Mounting /home/usr...
[?[32m  OK  ?[0m] Mounted /home/usr.
[?[32m  OK  ?[0m] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Save boot dmesg content...
         Starting Reconfigure the system on administrator request...
[?[32m  OK  ?[0m] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[?[32m  OK  ?[0m] Started Save boot dmesg content.
[?[32m  OK  ?[0m] Started Update UTMP about System Boot/Shutdown.
netprofile wird gestartet:  The default is the current profile.
?[85G[?[1;32m  OK  ?[0;39m]


nvidia-current (346.72-1.mga5.nonfree): Already installed on this kernel.
[?[32m  OK  ?[0m] Started Tell Plymouth To Write Out Runtime Data.
[?[32m  OK  ?[0m] Reached target System Initialization.
[?[32m  OK  ?[0m] Reached target Paths.
[?[32m  OK  ?[0m] Listening on CUPS Scheduler.
[?[32m  OK  ?[0m] Listening on PC/SC Smart Card Daemon Activation Socket.
[?[32m  OK  ?[0m] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[?[32m  OK  ?[0m] Listening on D-Bus System Message Bus Socket.
[?[32m  OK  ?[0m] Reached target Sockets.
[?[32m  OK  ?[0m] Reached target Timers.
         Starting Manage Sound Card State (restore and store)...
[?[32m  OK  ?[0m] Started Manage Sound Card State (restore and store).
virtualbox (4.3.28-1.mga5): Already installed on this kernel.
Suche neue Hardware-Komponenten ?[85G[?[1;32m  OK  ?[0;39m]

[?[32m  OK  ?[0m] Started Reconfigure the system on administrator request.
[?[32m  OK  ?[0m] Reached target Basic System.
         Starting Disk Manager (legacy version)...
         Starting Daemon for power management...
         Starting Configure CPU power related settings...
         Starting Adapt Mageia theme to the monitor resolution...
         Starting ACPI Event Daemon...
         Starting Shorewall IPv6 firewall...
         Starting NTP client/server...
         Starting Job spooling tools...
[?[32m  OK  ?[0m] Started Job spooling tools.
         Starting Login Service...
         Starting LSB: Nameserver information manager...
         Starting CUPS Scheduler...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting D-Bus System Message Bus...
[?[32m  OK  ?[0m] Started D-Bus System Message Bus.
[?[32m  OK  ?[0m] Started Daemon for power management.
[?[32m  OK  ?[0m] Started Avahi mDNS/DNS-SD Stack.
[?[32m  OK  ?[0m] Started Disk Manager (legacy version).
         Starting iptables Firewall for IPv4...
         Starting ip6tables Firewall for IPv6...
         Starting Permit User Sessions...
[?[32m  OK  ?[0m] Started Configure CPU power related settings.
[?[32m  OK  ?[0m] Started ACPI Event Daemon.
[?[32m  OK  ?[0m] Started Permit User Sessions.
[?[32m  OK  ?[0m] Started NTP client/server.
[?[32m  OK  ?[0m] Started iptables Firewall for IPv4.
[?[32m  OK  ?[0m] Started Login Service.
         Starting Authorization Manager...
         Starting Command Scheduler...
[?[32m  OK  ?[0m] Started Command Scheduler.
         Starting Wait for Plymouth Boot Screen to Quit...
         Starting Display Manager...
[?[32m  OK  ?[0m] Started Display Manager.
[?[32m  OK  ?[0m] Started ip6tables Firewall for IPv6.
         Starting Manage, Install and Generate Color Profiles...
[?[32m  OK  ?[0m] Started Adapt Mageia theme to the monitor resolution.
[?[32m  OK  ?[0m] Started Manage, Install and Generate Color Profiles.
[?[32m  OK  ?[0m] Started Authorization Manager.
[?[32m  OK  ?[0m] Started LSB: Nameserver information manager.
         Starting LSB: Bring up/down networking...
[?[32m  OK  ?[0m] Started CUPS Scheduler.
         Starting Make remote CUPS printers available locally...
[?[32m  OK  ?[0m] Started Make remote CUPS printers available locally.
[?[32m  OK  ?[0m] Started LSB: Bring up/down networking.
         Starting irqbalance daemon...
[?[32m  OK  ?[0m] Started irqbalance daemon.
         Starting LSB: Enables MSEC security policy on boot...
         Starting LSB: Checks if a partition is close to full up...
[?[32m  OK  ?[0m] Started LSB: Enables MSEC security policy on boot.
[?[32m  OK  ?[0m] Started LSB: Checks if a partition is close to full up.
         Starting LSB: Locks NumLock key at init runlevel change...
[?[32m  OK  ?[0m] Started LSB: Locks NumLock key at init runlevel change.
         Starting LSB: VirtualBox Linux kernel module...
Da steht er also und wie solls weiter gehen :?
Die Suche "Kernel modul für Virtualbox verhindert den Start von Linux" war kein Treffer.
Gruß
J.
Zuletzt geändert von jkowalzik am Sep 5th, '15, 19:56, insgesamt 1-mal geändert.
...Luxus ist alles was sich reparieren läßt
Benutzeravatar
jkowalzik
 
Beiträge: 3330
Registriert: Okt 2nd, '11, 12:34
Wohnort: Plettenberg

Re: Mageia startet mal wieder nicht nach installation

Beitragvon man-draker » Sep 5th, '15, 12:55

Na du kannst z.B. in Systemwartungs Modus booten und den richtigen Grafiktreiber installieren.
"Die letzte Stimme, die man hört, bevor die Welt explodiert, wird die Stimme eines Experten sein, der sagt: 'Das ist technisch unmöglich.'"
(Peter Ustinov)
Benutzeravatar
man-draker
 
Beiträge: 4992
Registriert: Jun 1st, '11, 12:56

DKMS - Modul nicht kompiliert

Beitragvon jkowalzik » Sep 5th, '15, 19:59

man-draker hat geschrieben:Na du kannst z.B. in Systemwartungs Modus booten und den richtigen Grafiktreiber installieren.

Hallo!
Genau das war es, die Installationsroutine hat zwar alles herunter geladen, aber das Nvidia-Modul wurde nicht erstellt.
Genereller Fehler - oder nur bei mir so :mrgreen:
Gruß
J.
...Luxus ist alles was sich reparieren läßt
Benutzeravatar
jkowalzik
 
Beiträge: 3330
Registriert: Okt 2nd, '11, 12:34
Wohnort: Plettenberg

Re: DKMS - Modul nicht kompiliert

Beitragvon man-draker » Sep 5th, '15, 22:59

jkowalzik hat geschrieben:Genereller Fehler - oder nur bei mir so :mrgreen:

Na, was glaubst du, wie ich auf den Hinweis gekommen bin. :roll:
"Die letzte Stimme, die man hört, bevor die Welt explodiert, wird die Stimme eines Experten sein, der sagt: 'Das ist technisch unmöglich.'"
(Peter Ustinov)
Benutzeravatar
man-draker
 
Beiträge: 4992
Registriert: Jun 1st, '11, 12:56

Re: DKMS - Modul nicht kompiliert

Beitragvon doktor5000 » Sep 6th, '15, 07:06

jkowalzik hat geschrieben:Genau das war es, die Installationsroutine hat zwar alles herunter geladen, aber das Nvidia-Modul wurde nicht erstellt.
Genereller Fehler - oder nur bei mir so :mrgreen:

Das nvidia-Modul muss nicht erstellt werden, drakx11 installiert die vorkompilierten dkms-Module. Und ja, ist nur bei dir so.
Ich bin nicht böse, sondern nur ehrlich. Und wer lesen kann, ist klar im Vorteil.
----
Mageia - the magic continues
Benutzeravatar
doktor5000
 
Beiträge: 6055
Registriert: Jun 2nd, '11, 09:39


Zurück zu Basis-Support

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast