TechnoTrend Fernsehbox

[stepet]

Moin,

als allererstes "Herzlichen Glückwunsch" zu dem gelungenen Fork von Mandriva zu Mageia.
Ich "nutze" Mageia jetzt seit dem 2.6. und bin bisher sehr zufrieden. Läuft bisher wie Mandriva in seinen besten Zeiten.
Aber jetzt ist das erste Problem aufgelaufen.

Ich habe von meinem Sohn seine USB-Fernsehbox geliehen und will mit dieser in Kombination mit Kaffeine fernsehen.
Leider wird die Box von Kaffeine nicht erkannt

lsusb ergibt:

Code: Alles auswählen

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0b48:3007 TechnoTrend AG TT-connect S2-3600
Bus 001 Device 005: ID 1058:0910 Western Digital Technologies, Inc. MyBook Essential External HDD
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 06bd:208d AGFA-Gevaert NV Snapscan e40
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1

TechnoTrend AG TT-connect S2-3600 ist also da.
Aber wie bekomme ich die Box unter Kaffeine zum laufen?
Wäre toll, wenn mir jemand mal ein wenig unter die Arme greifen könnte

Gruß stepet

[alf]

Ich weiß nicht ob Mageia einen Treiber dafür mitbringt, aber u.U. könntest du hier fündig werden.

[man-draker]

Ich habe von meinem Sohn seine USB-Fernsehbox geliehen und will mit dieser in Kombination mit Kaffeine fernsehen.

Starte den Rechner mal ohne angeschlossene Box, starte als root in einem Terminal

Code: Alles auswählen

tailf /var/log/messages

stecke die Box an und poste, was dann an Ausgaben kommt.

[stepet]

Ich weiß nicht ob Mageia einen Treiber dafür mitbringt, aber u.U. könntest du hier fündig werden.

Habe ich auch schon in einem anderen Forum angeboten bekommen
Nur leider bin ich zu dämlich und finde nicht mal die richtigen Treiber

Starte den Rechner mal ohne angeschlossene Box, starte als root in einem Terminal

Werde ich gleichmal ausprobieren

Gruß stepet

[stepet]

tailf /var/log/messages ergibt:

Code: Alles auswählen

[root@localhost stephan]# tailf /var/log/messages
Jun  7 17:09:38 localhost kernel: xt_time: kernel timezone is +0200
Jun  7 17:09:38 localhost net_applet[3089]: ### Program is starting ###
Jun  7 17:09:38 localhost logger: Shorewall started
Jun  7 17:09:43 localhost mgaapplet[3088]: running: ionice -p 3088 -n7
Jun  7 17:09:58 localhost nmbd[2747]: [2011/06/07 17:09:58.324388,  0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Jun  7 17:09:58 localhost nmbd[2747]:   *****
Jun  7 17:09:58 localhost nmbd[2747]:   
Jun  7 17:09:58 localhost nmbd[2747]:   Samba name server LOCALHOST is now a local master browser for workgroup MGAGROUP on subnet 192.168.10.3
Jun  7 17:09:58 localhost nmbd[2747]:   
Jun  7 17:09:58 localhost nmbd[2747]:   *****
Jun  7 17:10:53 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 5
Jun  7 17:10:54 localhost kernel: usb 1-5: New USB device found, idVendor=0b48, idProduct=3007
Jun  7 17:10:54 localhost kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun  7 17:10:54 localhost kernel: usb 1-5: Product: TT-USB2.0
Jun  7 17:10:54 localhost kernel: usb 1-5: Manufacturer: TechnoTrend
Jun  7 17:10:54 localhost mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5"
Jun  7 17:10:54 localhost mtp-probe: bus: 1, device: 5 was not an MTP device

[man-draker]

Habe ich auch schon in einem anderen Forum angeboten bekommen
Nur leider bin ich zu dämlich und finde nicht mal die richtigen Treiber

http://www.linux-club.de/viewtopic.php?f=41&t=112400
Könnte auch unter mageia klappen.
Evtl. müssen noch Entwicklungswerkzeuge nachinstalliert werden.

[Lisufa]

Hi,

auch u.U: recht aussagefähig ist, Rechner/Notebook ohne Box starten,
Konsole öffnen:

Code: Alles auswählen

dmesg

eintrage, Box anschließen und in der Konsole Befehl mit "Enter" bestätigen. Nun müsste am Ende der Konsole-Befehls-Ausgabe eine Meldung über das verhalten am USB Anschluss folgen. So zB ob und welche Hardware erkannt, welcher Treiber/Firmware ggf gern geladen würde oder wird usw ... Manchmal findet sich sogar schon ein Vorschlag in der Ausgabe zur Lösung des "Fehlers".

[stepet]

dmesg sagt:

Code: Alles auswählen

[stephan@localhost ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.7-desktop-1.mga (iurt@jonund.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Sun May 22 11:37:00 UTC 2011
Command line: BOOT_IMAGE=linux root=UUID=78220c3e-6991-4dea-a3db-5a30deded561 nokmsboot resume=UUID=b1b0a878-0315-4245-acdf-a78697ca6f81 splash=silent vga=788
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
 BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
 BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
 BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
 BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. G41M-ES2L/G41M-ES2L, BIOS F6 11/04/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0C0000000 mask FC0000000 uncachable
  2 base 100000000 mask FC0000000 write-back
  3 base 0BFF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f5340] f5340
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfee0000
 0000000000 - 00bfe00000 page 2M
 00bfe00000 - 00bfee0000 page 4k
kernel direct mapping tables up to bfee0000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ bfeda000-bfee0000
RAMDISK: 37b3e000 - 37ff0000
ACPI: RSDP 00000000000f6d40 00014 (v00 GBT   )
ACPI: RSDT 00000000bfee3040 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000bfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000bfee3180 043B3 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000bfee0000 00040
ACPI: HPET 00000000bfee7680 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000bfee7700 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 00000000bfee7740 0644A (v01 GBT    GBT   B0 5455312E BG?? 00020101)
ACPI: APIC 00000000bfee7580 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000bfeee1f0 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Initmem setup node 0 0000000000000000-0000000140000000
  NODE_DATA [000000013fffb000 - 000000013fffffff]
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000bfee0
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048175
  DMA zone: 56 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3921 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 767768 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff8800bfc00000 s76736 r8192 d21568 u524288
pcpu-alloc: s76736 r8192 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030249
Policy zone: Normal
Kernel command line: BOOT_IMAGE=linux root=UUID=78220c3e-6991-4dea-a3db-5a30deded561 nokmsboot resume=UUID=b1b0a878-0315-4245-acdf-a78697ca6f81 splash=silent vga=788
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4054696k/5242880k available (4068k kernel code, 1050180k absent, 138004k reserved, 3290k data, 720k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
Console: colour dummy device 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3000.003 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.00 BogoMIPS (lpj=3000003)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 16008 entries in 63 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (11999.65 BogoMIPS).
devtmpfs: initialized
Time: 17:38:03  Date: 06/07/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x3A, should be 0x36 (20110112/tbutils-314)
ACPI: SSDT 00000000bfeedbd0 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000bfeee090 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
pci 0000:00:00.0: [8086:2e30] type 0 class 0x000600
pci 0000:00:01.0: [8086:2e31] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io  0xe000-0xe01f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io  0xe100-0xe11f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io  0xe200-0xe21f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xe5100000-0xe51003ff]
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0xf000-0xf00f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:01:00.0: [10de:0421] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xb000-0xb07f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:03:00.0: reg 18: [mem 0xe5010000-0xe5010fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xe5000000-0xe500ffff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe4ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xe5000000-0xe50fffff 64bit pref]
pci 0000:04:01.0: [13f6:0111] type 0 class 0x000401
pci 0000:04:01.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:04:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xbff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0010-0x001f]
pnp 00:01: [io  0x0022-0x003f]
pnp 00:01: [io  0x0044-0x005f]
pnp 00:01: [io  0x0062-0x0063]
pnp 00:01: [io  0x0065-0x006f]
pnp 00:01: [io  0x0074-0x007f]
pnp 00:01: [io  0x0091-0x0093]
pnp 00:01: [io  0x00a2-0x00bf]
pnp 00:01: [io  0x00e0-0x00ef]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x0290-0x029f]
pnp 00:01: [io  0x0800-0x087f]
pnp 00:01: [io  0x0290-0x0294]
pnp 00:01: [io  0x0880-0x088f]
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0080-0x0090]
pnp 00:02: [io  0x0094-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f0-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [irq 7]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0b: [io  0x0400-0x04cf]
system 00:0b: [io  0x0400-0x04cf] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xc0000000-0xcfffffff]
system 00:0c: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x000cca00-0x000cffff]
pnp 00:0d: [mem 0x000f0000-0x000f7fff]
pnp 00:0d: [mem 0x000f8000-0x000fbfff]
pnp 00:0d: [mem 0x000fc000-0x000fffff]
pnp 00:0d: [mem 0xbfee0000-0xbfefffff]
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0xbfedffff]
pnp 00:0d: [mem 0xfec00000-0xfec00fff]
pnp 00:0d: [mem 0xfed13000-0xfed1dfff]
pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
pnp 00:0d: [mem 0xfee00000-0xfee00fff]
pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
pnp 00:0d: [mem 0xfff00000-0xffffffff]
pnp 00:0d: [mem 0x000e0000-0x000effff]
system 00:0d: [mem 0x000cca00-0x000cffff] has been reserved
system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0xbfee0000-0xbfefffff] could not be reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xbfedffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfed13000-0xfed1dfff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: [mem 0xffb80000-0xffbfffff]
pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe5200000-0xe53fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe5400000-0xe55fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe3000000-0xe301ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xe5200000-0xe53fffff]
pci 0000:00:1c.0:   bridge window [mem 0xe5400000-0xe55fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xe5020000-0xe502ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe4ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xe5000000-0xe50fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xe5200000-0xe53fffff]
pci_bus 0000:02: resource 2 [mem 0xe5400000-0xe55fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xe4000000-0xe4ffffff]
pci_bus 0000:03: resource 2 [mem 0xe5000000-0xe50fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4808k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bbc00000 - ffff8800bfc00000
software IO TLB at phys 0xbbc00000 - 0xbfc00000
audit: initializing netlink socket (disabled)
type=2000 audit(1307468283.258:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7928
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90011100000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=b1b0a878-0315-4245-acdf-a78697ca6f81
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 15:907:642
pci_express 0000:00:1c.1:pcie08: hash matches
rtc_cmos 00:04: setting system clock to 2011-06-07 17:38:04 UTC (1307468284)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 720k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 8k freed
Freeing unused kernel memory: 80k freed
nash-hotplug (39): /proc/39/oom_adj is deprecated, please use /proc/39/oom_score_adj instead.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.7-desktop-1.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Refined TSC clocksource calibration: 2999.942 MHz.
Switching to clocksource tsc
ata2.01: NODEV after polling detection
ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
ata2.00: applying bridge limits
ata1.00: HPA detected: current 976771055, native 976773168
ata1.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133
ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: detected capacity change from 0 to 500106780160
scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
usb 1-8: new high speed USB device using ehci_hcd and address 4
usb 1-8: New USB device found, idVendor=1058, idProduct=0910
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: External HDD   
usb 1-8: Manufacturer: Western Digital
usb 1-8: SerialNumber: 574341505A32373731363330
usb 4-2: new full speed USB device using uhci_hcd and address 2
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
usb 4-2: New USB device found, idVendor=06bd, idProduct=208d
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: SNAPSCAN
usb 4-2: Manufacturer: AGFA
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=045e, idProduct=00f9
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Microsoft Wireless Desktop Receiver 3.1
usb 5-1: Manufacturer: Microsft
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input0
microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.3-1/input0
microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input1
microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.3-1/input1
udev[116]: starting version 166
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
IT8718 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  270.41.19  Mon May 16 23:32:08 PDT 2011
EXT4-fs (sda1): re-mounted. Opts: acl
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
fuse init (API version 7.16)
Adding 4088504k swap on /dev/sda5.  Priority:-1 extents:1 across:4088504k
leds_ss4200: no LED devices found
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
intel_rng: FWH not detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
WARNING! power/level is deprecated; use power/control instead
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-8:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xffffc9000067e000, 6c:f0:49:a8:db:5e, XID 1c4000c0 IRQ 43
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
C-Media PCI 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
scsi 2:0:0:0: Direct-Access     WD       3200AVB External 1.06 PQ: 0 ANSI: 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: detected capacity change from 0 to 320072933376
 sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI disk
NET: Registered protocol family 10
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ata1.00: configured for UDMA/133
ata1: EH complete
EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
martian source 255.255.255.255 from 192.168.10.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:11:6b:18:b3:0e:08:00
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
xt_time: kernel timezone is +0200
eth0: no IPv6 routers present
usb 1-5: new high speed USB device using ehci_hcd and address 5
usb 1-5: New USB device found, idVendor=0b48, idProduct=3007
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: TT-USB2.0
usb 1-5: Manufacturer: TechnoTrend


Code: Alles auswählen

http://www.linux-club.de/viewtopic.php?f=41&t=112400
Könnte auch unter mageia klappen.
Evtl. müssen noch Entwicklungswerkzeuge nachinstalliert werden.

Da lese ich mich mal ein

Gruß stepet

[stepet]

Übrigens steht das Gerät unter MCC-> Hardware als Scanner.
Was soll ich denn davon halten?!

Code: Alles auswählen

Identifikation
Hersteller: ‎TechnoTrend

Beschreibung: ‎TT-USB2.0

Medienklasse: ‎

Verbindung
Bus: ‎USB

Bus-PCI #: ‎1

PCI-Gerät #: ‎5

Hersteller-ID: ‎0x0b48

Geräte-ID: ‎0x3007

Sonstiges
Modul: ‎Unbekannt

Gruß stepet

[alf]

Die Sourcen (/usr/src/linux/drivers/media/dvb/ttusb-dec )für den Treiber sind im kernel enthalten, aber ein kompiliertes Modul ist nicht vorhanden, da wird man wohl den Kernel neu bauen müssen.

[stepet]

Die Sourcen (/usr/src/linux/drivers/media/dvb/ttusb-dec )für den Treiber sind im kernel enthalten, aber ein kompiliertes Modul ist nicht vorhanden, da wird man wohl den Kernel neu bauen müssen.

Da ich ja eher nur ein Anwender bin und kein Problemlöser, lasse ich wohl zumindestens von dieser Option die Finger
Wenn es keinen anderen Lösungsweg geben sollte, dann stöpsel ich das Gerät eben wieder ab

Gruß stepet

[Lisufa]

Versuch doch dem im Link zum Linux-Club enthaltenen Anweisungen zu folgen, so schwer ist das nicht. Du brauchst halt nur die Sourcen (mercurial, gcc, make etc) zum Bau der Module, das sich im Wiki (Mageia/Mandrivausers) nachlesen lässt welche Pakete genau dafür in Frage kommen.

Soweit sich das bei Linux-TV nachlesen lässt, passt alles ( Treiber )... so wie auch beim geposteten Link zum Linux-Club beschrieben.

[man-draker]

Ich habe von meinem Sohn seine USB-Fernsehbox geliehen und will mit dieser in Kombination mit Kaffeine fernsehen.

Nachdem das Teil nur geliehen ist und ein "eben mal Paket installieren" nicht geht, ist die Frage, wie wichtig dir die Lösung des Problems ist.

[man-draker]

da wird man wohl den Kernel neu bauen müssen.

Nein, nur ein neues Kernel-Modul.

[stepet]

Es ist nicht lebensnotwendig, das ich das Ding zum laufen bekomme
Trotzdem wäre es doch ganz nett gewesen.

Bei "make" kommt übrigens folgende Fehlermeldung:

Code: Alles auswählen

make: *** [all] Fehler 2


Irgendwas fehlt noch.
Ich bin übrigens nach der Linux-Club-Anleitung vorgegangen bzw. ich mußte sie ein wenig modifizieren, da ich sonst keine Berechtigung gehabt hätte.


Statt

- Paket mercurial installiert
- hg clone http://mercurial.intuxication.org/hg/s2-liplianin/
- cd s2-liplianin
- make
- sudo make install
- reboot

habe ich

- Paket mercurial installiert
- su
- hg clone http://mercurial.intuxication.org/hg/s2-liplianin/
- cd s2-liplianin
- make (hier kam schon die Fehlermeldung)
- make install
- reboot

[alf]

da wird man wohl den Kernel neu bauen müssen.

Nein, nur ein neues Kernel-Modul.

Wie dem auch sei, es besteht jedenfalls keine Notwendigkeit selbiges aus Drittquellen erstellen zu wollen

[alf]

versuch mal diesen Weg:
das alles als root
-- Kernel-Sourcen installieren
-- cd /usr/src/linux
-- make oldconfig
-- make drivers/media/dvb/ttusb-dec/ttusb_dec.ko
wenn fehlerfrei kompiliert
-- depmod -a
-- modprobe ttusb_dec

da ich ein solches Gerät nicht habe kann ich aber nicht sagen ob das dann auch funktioniert. die nötige Firmware sollte im Kernel-firmware Paket enthalten sein.

good luck
Alf

[magnus]

So als ahnungsloser Blindschuss würde ich auch kernel-firmware-extra installieren.

[alf]

Kernel-Firmware ist ausreichend, gerade nachgesehen.

[stepet]

versuch mal diesen Weg:
das alles als root
-- Kernel-Sourcen installieren
-- cd /usr/src/linux
-- make oldconfig
-- make drivers/media/dvb/ttusb-dec/ttusb_dec.ko
wenn fehlerfrei kompiliert
-- depmod -a
-- modprobe ttusb_dec

da ich ein solches Gerät nicht habe kann ich aber nicht sagen ob das dann auch funktioniert. die nötige Firmware sollte im Kernel-firmware Paket enthalten sein.

good luck
Alf

öhm...wo bekomme ich denn die richtigen Kernel-Sourcen her? Übers MCC?

Edit: ich installiere grad die Kernel-Sourcen

[alf]

öhm...wo bekomme ich denn die richtigen Kernel-Sourcen her? Übers MCC?

Das ist der gewöhnliche Weg, geht aber auch über die Konsole(als root)

Code: Alles auswählen

 urpmi kernel-source-2.6.38.7-1mga

[alf]

öhm...wo bekomme ich denn die richtigen Kernel-Sourcen her? Übers MCC?

Das ist der gewöhnliche Weg, geht aber auch über die Konsole(als root)

Code: Alles auswählen

 urpmi kernel-source-2.6.38.7-1mga

[stepet]

Hab jetzt unter /usr/src zwei Linux-Ordner zur Auswahl

1. kernel-linus 2.6...

2. linux 2.6...

Wenn ich es noch dunkel in Erinnerung habe, müsste der Ordner kernel-linus der richtige sein, oder?

[alf]

nein, der andere
wenn du in der konsole cd /usr/src/linux eingibst, solltest du eigentlich im richtigen landen.

[stepet]

Meine Frage war aus diesem Grund

Code: Alles auswählen

bash: cd: /usr/src/linux: Datei oder Verzeichnis nicht gefunden