Having it recognized in MCC is one thing, but being able to use it is another one.
When I start the PC with the receiver connected, nothing works, the scan command gives me "Device or resource busy", and wscan "No proper terrestrial card found".
When I start the PC with the receiver unplugged, and then plug, the command "scan /usr/share/dvb/dvb-t/it-All" find the channels on which there are programs broadcasted here in Belgium.
- Code: Select all
tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
Network Name 'VRTmux1'
0x0000 0x1010: pmt_pid 0x0000 VRT -- EEN (running)
0x0000 0x1020: pmt_pid 0x0000 VRT -- Canvas (running)
0x0000 0x1030: pmt_pid 0x0000 VRT -- Ketnet op 12 (running)
0x0000 0x1040: pmt_pid 0x0000 VRT -- Radio 1 (running)
0x0000 0x1050: pmt_pid 0x0000 VRT -- Radio 2 (running)
0x0000 0x1060: pmt_pid 0x0000 VRT -- Klara (running)
0x0000 0x1070: pmt_pid 0x0000 VRT -- Studio Brussel (running)
0x0000 0x1080: pmt_pid 0x0000 VRT -- MNM (running)
0x0000 0x1090: pmt_pid 0x0000 VRT -- Klara Continuo (running)
0x0000 0x10a0: pmt_pid 0x0000 VRT -- Sporza (running)
0x0000 0x10c0: pmt_pid 0x0000 VRT -- Nieuws+ (running)
0x0000 0x10d0: pmt_pid 0x0000 VRT -- MNM Hits (running)
plus a whole series of
- Code: Select all
tune to: xxx000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
But then again,
- Code: Select all
w_scan -X
w_scan version 20120605 (compiled for DVB API 5.10)
guessing country 'BE', use -c <country> to override
using settings for BELGIUM
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format czap/tzap/szap/xine
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> "Realtek RTL2832 (DVB-T)" doesnt support TERRESTRIAL -> SEARCH NEXT ONE.
main:3220: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
And xine says "No valid channels.conf found"
And yes, I made my user in the group video.