Issue to HDD mageia 9 or 10

[lmh1]

Why did i get this every hdd i buyed used? its so hard to find working hdd in mageia 9 or 10?

Works on fedora so most be poor software none hdd support list?

[benmc]

can you please post output of:

Code: Select all

$ lsblk

from the Mageia Live that you used?

[doktor5000]

Code: Select all

loop0    7:0    0   3,7G  1 loop /run/mgalive/ovlsize
sda      8:0    0 476,9G  0 disk
├─sda1   8:1    0   450M  0 part
├─sda2   8:2    0   100M  0 part
├─sda3   8:3    0    16M  0 part
├─sda4   8:4    0 417,5G  0 part
├─sda5   8:5    0   866M  0 part
├─sda6   8:6    0  57,5G  0 part
├─sda7   8:7    0   300M  0 part
└─sda8   8:8    0   300M  0 part
sdb      8:16   0 931,5G  0 disk
├─sdb1   8:17   0   450M  0 part
├─sdb2   8:18   0   100M  0 part
├─sdb3   8:19   0    16M  0 part
├─sdb4   8:20   0 930,1G  0 part
└─sdb5   8:21   0   832M  0 part
sdc      8:32   0   9,1T  0 disk
├─sdc1   8:33   0     1M  0 part
├─sdc2   8:34   0    15M  0 part
└─sdc3   8:35   0   9,1T  0 part
sdd      8:48   0 931,5G  0 disk
├─sdd1   8:49   0  50,3G  0 part
├─sdd2   8:50   0     1K  0 part
├─sdd5   8:53   0     4G  0 part
└─sdd6   8:54   0 877,2G  0 part
sde      8:64   0   9,1T  0 disk
├─sde1   8:65   0     1M  0 part
├─sde2   8:66   0   127M  0 part
└─sde3   8:67   0   9,1T  0 part
sdf      8:80   0   1,8T  0 disk
├─sdf1   8:81   0   100M  0 part
├─sdf2   8:82   0   128M  0 part
└─sdf3   8:83   0   1,8T  0 part
sdg      8:96   0 111,8G  0 disk
└─sdg1   8:97   0 111,8G  0 part
sr0     11:0    1   3,8G  0 rom

did not help much? did not find if

Code: Select all

ID-1: /dev/sda vendor: Samsung model: MZHPV512HDGL-00000 size: 476.94 GiB
  ID-2: /dev/sdb vendor: Samsung model: SSD 850 EVO 1TB size: 931.51 GiB
  ID-3: /dev/sdc vendor: Seagate model: ST10000VN0004-1ZD101 size: 9.1 TiB
  ID-4: /dev/sdd vendor: Hitachi model: HDE721010SLA330 size: 931.51 GiB
  ID-5: /dev/sde vendor: Seagate model: ST10000VN0004-2GS11L size: 9.1 TiB
  ID-6: /dev/sdf vendor: Seagate model: ST2000DM001-9YN164 size: 1.82 TiB
  ID-7: /dev/sdg vendor: Intel model: SSDSC2CW120A3 size: 111.79 GiB

or other Seagate\WD green disk works? i get issue with last 3-4 disk.
Only 1 works for short time so its get to slow its useless take 3 hours to log in.
so most be a bug or some thing in controller that mess up hdd. Did not works to use replace mageia on this get same issue.

[benmc]

*lsblk* was not a fix.
It was to see if the Mageia Live could resolve any internal ssd/hdd/nvme devices, and it seems to be able too.

Can you post output of

Code: Select all

$ diskdrake

also from the Live system.

TIA

[doktor5000]

The error message is not about the HDD, but about the filesystem on that HDD.

An error occurred. Failed to mount partition "/dev/sdc3" in folder "/mnt/install/media/win_c3".

Mageia will try to create fstab entries for all Windows filesystems it finds, and mount them under /media/win_

If you have windows filesystems which have errors, or Windows installations that do not have fastboot enabled then this issue might occur.

[lmh1]

Code: Select all

diskdrake
Too late to run INIT block at /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
Ignore the following Glib::Object::Introspection & Gtk3 warnings
Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm line 539.
mke2fs 1.47.0 (5-Feb-2023)
tune2fs 1.47.0 (5-Feb-2023)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
mke2fs 1.47.0 (5-Feb-2023)
Creating filesystem with 229957944 4k blocks and 57491456 inodes
Filesystem UUID: 9e9d2454-2b43-4dfd-932c-e6f9e69e2a8f
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000, 214990848

Allocating group tables: done                           
Writing inode tables: done                           
Writing superblocks and filesystem accounting information: done     

/dev/sdd6: clean, 11/57491456 files, 3626733/229957944 blocks
cp: error reading '/proc/1549/task/1549/mem': Input/output error
cp: error reading '/proc/1549/task/1549/clear_refs': Invalid argument

Take long time look like it sleep. (Copying /proc)

Added code tags. ~Germ