[SOLVED]snd_hda_intel: no codecs found - no sound

[broncosman]

After rebooting my PC today, I found that I could no longer boot into Mageia. Every time it would just hang after displaying the following error messages:

dracut: Cancelling resume operation. Device not found.

CORB reset timeout#1, CORBRP = 0

snd_hda_intel: no codecs found!

After researching a bit online, I found a solution for the boot issue. I used another bootable distro to access my drive, and then I made a file called my-alsa.conf in /etc/modprobe.d , in which I put the following line:

options snd-hda-intel enable=0,1,0

After this, I was able to boot into Mageia. However, now I have no sound. The taskbar widget says "No output or input devices found". It doesn't matter if I use PulseAudio or PipeWire - no sound either way.

Here is my lspci:

Code: Select all

00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
00:14.3 Network controller: Intel Corporation Cannon Lake PCH CNVi WiFi (rev 10)
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
00:1f.0 ISA bridge: Intel Corporation H310 Chipset LPC/eSPI Controller (rev 10)
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
00:1f.5 Serial bus controller: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
01:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1)


Please help.

[doktor5000]

Hi there, you don't mention what Mageia release you're using and what kernel you're booting that has the issue, and the last kernel version where it was OK.
Current would be Mageia 9 and kernel 6.6.22

After rebooting my PC today, I found that I could no longer boot into Mageia. Every time it would just hang after displaying the following error messages:

dracut: Cancelling resume operation. Device not found.

CORB reset timeout#1, CORBRP = 0

snd_hda_intel: no codecs found!

The sound device should not prevent resuming, although the absence of a swap device (or reformatting that or changing the UUID of the swap device) would do that.
So you should remove your /etc/modprobe.d/my-alsa.conf and boot regularly and provide a journal log.
It would be helpful if you could run

Code: Select all

journalctl -ab > /tmp/journal.log

as root after a fresh boot, and then later attach /tmp/journal.log here.

Also please check if you have the package alsa-sof-firmware installed.
And the normal lscpci output is not that helpful as it's missing vendor and product IDs, please provide either the output of lspcidrake -v or lspci -nn
Otherwise please mention your mainboard or laptop make/model.

This is what I've found for your device "Intel Corporation Cannon Lake PCH cAVS" so far:
https://lore.kernel.org/all/c71dbf89-80 ... tel.com/T/
https://bbs.archlinux.org/viewtopic.php?id=269291
https://www.reddit.com/r/linuxmint/comm ... ecs_found/

[broncosman]

Hey, so I've managed to solve this . Found a solution by researching my device a bit more (Intel Corporation Cannon Lake PCH cAVS).

I put these lines

Code: Select all

options snd-hda-intel single_cmd=1
options snd-hda-intel probe_mask=1
options snd-hda-intel model=basic

Into /etc/modprobe.d/alsa-base.conf

My sound works now. Thank you

[Germ]

Glad you got it sorted.