- Double checked dll.conf
ran scanimage -L (scanner found)
plugged in a USB cable, scanner found via USB as well
ran diagnostics for scanner (pings OK)
found an updated driver and installed it, successfully re-ran tests
The machine in question is a Brother DCP-7055W, probably 7-8 years old.
- Code: Select all
sudo brsaneconfig4 -d BigBroEscaner
-----------------------------
cat /etc/fstab
# Entry for /dev/sda9 :
UUID=597b3061-3903-4406-8108-d5fbf4ae4b9b / ext4 noatime,acl 1 1
# Entry for /dev/sda5 :
UUID=3b6e3987-a27d-4ddc-9d1b-3234a9b2a1d5 /boot ext4 noatime,acl 1 2
# Entry for /dev/sda6 :
UUID=2604686b-05cf-432a-ae3e-89e58ada8f25 /home ext4 noatime,acl 1 2
# Entry for /dev/sda8 :
UUID=01CEB56D1785CAF0 /media/win_d ntfs-3g defaults,nofail,umask=000 0 0
# Entry for /dev/sda2 :
UUID=D85627095626E7C8 /media/win_e ntfs-3g defaults,nofail,umask=000 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda7 :
UUID=16816a37-51f9-459b-988a-0bab4ba47b76 swap swap defaults 0 0
-----------------------------
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
-----------------------------
ls -R -all /proc/bus/usb
ls: no se puede acceder a '/proc/bus/usb': No existe el fichero o el directorio
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: No existe el fichero o el directorio
-----------------------------
scanimage -L
device `v4l:/dev/video0' is a Noname ASUS USB2.0 WebCam: ASUS USB2.0 virtual device
device `brother4:net1;dev0' is a Brother BigBroEscaner DCP-7055W
-----------------------------
-----------------------------
ping
test BigBroEscaner
ping 192.168.1.130 -w 10
PING 192.168.1.130 (192.168.1.130) 56(84) bytes of data.
64 bytes from 192.168.1.130: icmp_seq=1 ttl=64 time=2.35 ms
64 bytes from 192.168.1.130: icmp_seq=2 ttl=64 time=8.19 ms
64 bytes from 192.168.1.130: icmp_seq=3 ttl=64 time=1.38 ms
^C
--- 192.168.1.130 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 12ms
rtt min/avg/max/mdev = 1.375/3.970/8.188/3.009 ms