- Code: Select all
deb http://de.archive.ubuntu.com/ubuntu/ xenial main restricted universe
sudo apt-get update
sudo apt-get install r8168-dkms
How be it on mageia 7.1?
Because fedora 23 works this out of the box so why did magia did not works?
deb http://de.archive.ubuntu.com/ubuntu/ xenial main restricted universe
sudo apt-get update
sudo apt-get install r8168-dkms
lmh1 wrote:I want documentation how to set up an install drivers or its it impossible?
doktor5000 wrote:Could you at least post the PCI vendor/product ID for the network device that "did not work" ?
Realtek semiconductor co LTD device 8125
subsystem Device 0123
ID=0002 REV=4 LEN = 100
04:00.0
[doktor5000@Mageia7]─[17:45:20]─[~] sudo modprobe -c | grep -i "10ec.*8125"
alias pci:v000010ECd00008125sv*sd*bc*sc*i* r8169
[doktor5000@Mageia7]─[17:45:22]─[~]
lmh1 wrote:I want documentation how to set up an install drivers or its it impossible?
I have this card, its works nice with windows 10, but may update make some issue with other things.
Why its works with fedora but not in ubuntu\mint i dont know?
that is also ustanable is mellanox connect x1 SFP+ works nice?
Its only intel and mellanox full support for linux?
Hopeful i think its 2,5 times faster than 1 gigabit lan. its possible to use SFP+ instead. But i want option if that is to hard.
I think its soon will come 2.5 gigabit switch\router.
If you are running the target kernel, then you should be able to do :
# ./autorun.sh (as root or with sudo)
You can check whether the driver is loaded by using following commands.
# lsmod | grep r8125
# ifconfig -a
If there is a device name, ethX, shown on the monitor, the linux
driver is loaded. Then, you can use the following command to activate
the ethX.
# ifconfig ethX up
,where X=0,1,2,...
Users browsing this forum: Google [Bot] and 1 guest