I have been using Mageia 6 XFCE on my desktop for quite some time and I am experiencing a weird issue.
I usually do not shutdown my desktop as my whole family is using the desktop every now and then. However, the monitor goes blank sometimes (looks like into power save mode) and nothing works at that time. I tried Ctrl-Alt-backspace, Ctrl-Alt-F1 thru Ctrl-Alt-F10 to see if I can get into a different console. I assigned a shortcut (Super T) for xfce4-terminal and tried that so that I can see if "sudo reboot" works or not. However, that doesn't work either. I am not sure what is causing this issue. The only thing that works is turn off the desktop manually by pressing the power button for about 10 seconds and then reboot it. This week it happened twice and I am worried that this might damage the HDD of the desktop.
My xscreensaver has the power management option disabled.
Below is the output of dmesg after a reboot.
- Code: Select all
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 4.9.56-desktop-1.mga6 (iurt@rabbit.mageia.org) (gcc version 5.4.0 (Mageia 5.4.0-5.mga6) ) #1 SMP Thu Oct 12 22:55:31 UTC 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.56-desktop-1.mga6 root=UUID=5830f626-18ea-40d6-884a-748d839edaf9 ro splash quiet noiswmd resume=UUID=ea3274ec-cf02-406d-b0a4-1b7a5692f585 audit=0
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff98000-0x00000000cffbbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffbc000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fe000000-0x00000001ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 7360BWU/LENOVO, BIOS 5CKT54AUS 09/07/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fe000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6b20-0x000f6b2f] mapped at [ffff9cdc000f6b20]
[ 0.000000] Base memory trampoline at [ffff9cdc00097000] 97000 size 24576
[ 0.000000] BRK [0x31f67000, 0x31f67fff] PGTABLE
[ 0.000000] BRK [0x31f68000, 0x31f68fff] PGTABLE
[ 0.000000] BRK [0x31f69000, 0x31f69fff] PGTABLE
[ 0.000000] BRK [0x31f6a000, 0x31f6afff] PGTABLE
[ 0.000000] BRK [0x31f6b000, 0x31f6bfff] PGTABLE
[ 0.000000] BRK [0x31f6c000, 0x31f6cfff] PGTABLE
[ 0.000000] BRK [0x31f6d000, 0x31f6dfff] PGTABLE
[ 0.000000] BRK [0x31f6e000, 0x31f6efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36f09000-0x3777cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F68F0 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000CFF8A29C 0000B4 (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: TCPA 0x00000000CFF97AC9 000032 (v02 LENOVO TC-5C 00000136 PTL 00000000)
[ 0.000000] ACPI: FACP 0x00000000CFF97AFB 0000F4 (v03 LENOVO TC-5C 00000136 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000CFF8E372 0096D3 (v01 LENOVO TC-5C 00000136 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000CFFBBFC0 000040
[ 0.000000] ACPI: FACS 0x00000000CFFBBFC0 000040
[ 0.000000] ACPI: DMAR 0x00000000CFF97BEF 000120 (v01 LENOVO TC-5C 00000136 LOHR 00000001)
[ 0.000000] ACPI: SLIC 0x00000000CFF97D0F 000176 (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000CFF97E85 00003C (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: HPET 0x00000000CFF97EC1 000038 (v01 LENOVO TC-5C 00000136 LTP 00000001)
[ 0.000000] ACPI: APIC 0x00000000CFF97EF9 000068 (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000CFF97F61 000028 (v01 LENOVO TC-5C 00000136 LTP 00000001)
[ 0.000000] ACPI: ASF! 0x00000000CFF97F89 000077 (v32 LENOVO TC-5C 00000136 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BB9C 00025F (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BAF6 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BA50 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8B9AA 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8B904 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8B85E 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8B7B8 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8B712 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8A350 0013C2 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001fdffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1fdff8000-0x1fdffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001fdffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001fdffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001fdffffff]
[ 0.000000] On node 0 totalpages: 1892124
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13246 pages used for memmap
[ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31
[ 0.000000] Normal zone: 16256 pages used for memmap
[ 0.000000] Normal zone: 1040384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000d8000000-0x00000000dfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff98000-0xcffbbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffbc000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff9cddfdc00000 s106712 r8192 d32552 u1048576
[ 0.000000] pcpu-alloc: s106712 r8192 d32552 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1862537
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.56-desktop-1.mga6 root=UUID=5830f626-18ea-40d6-884a-748d839edaf9 ro splash quiet noiswmd resume=UUID=ea3274ec-cf02-406d-b0a4-1b7a5692f585 audit=0
[ 0.000000] audit: disabled (until reboot)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7358816K/7568496K available (7742K kernel code, 1221K rwdata, 3264K rodata, 1420K init, 796K bss, 209680K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:4352 nr_irqs:440 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2992.423 MHz processor
[ 0.001010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.84 BogoMIPS (lpj=2992423)
[ 0.001012] pid_max: default: 32768 minimum: 301
[ 0.001019] ACPI: Core revision 20160831
[ 0.004560] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.004582] Security Framework initialized
[ 0.004586] TOMOYO Linux initialized
[ 0.005024] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007852] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009345] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009354] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009686] Disabled fast string operations
[ 0.009691] CPU: Physical Processor ID: 0
[ 0.009692] CPU: Processor Core ID: 0
[ 0.009693] mce: CPU supports 6 MCE banks
[ 0.009702] process: using mwait in idle threads
[ 0.009706] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.009706] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.009992] Freeing SMP alternatives memory: 32K
[ 0.011004] ftrace: allocating 28638 entries in 112 pages
[ 0.018094] smpboot: Max logical packages: 1
[ 0.018099] DMAR: Host address width 36
[ 0.018100] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.018107] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.018107] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.018110] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630272 ecap 1000
[ 0.018111] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.018113] DMAR: dmar2: reg_base_addr fed92000 ver 1:0 cap c0000020630272 ecap 1000
[ 0.018114] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.018116] DMAR: dmar3: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.018117] DMAR: RMRR base: 0x000000d7c00000 end: 0x000000dfffffff
[ 0.018118] DMAR: RMRR base: 0x000000cffbc000 end: 0x000000cfffffff
[ 0.019174] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.030000] APIC calibration not consistent with PM-Timer: 360ms instead of 100ms
[ 0.030000] APIC delta adjusted to PM-Timer: 2078108 (7501889)
[ 0.030000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.030000] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.030000] ... version: 2
[ 0.030000] ... bit width: 40
[ 0.030000] ... generic registers: 2
[ 0.030000] ... value mask: 000000ffffffffff
[ 0.030000] ... max period: 000000007fffffff
[ 0.030000] ... fixed-purpose events: 3
[ 0.030000] ... event mask: 0000000700000003
[ 0.030000] x86: Booting SMP configuration:
[ 0.030000] .... node #0, CPUs: #1
[ 0.092017] x86: Booted up 1 node, 2 CPUs
[ 0.092017] smpboot: Total of 2 processors activated (11969.80 BogoMIPS)
[ 0.093313] devtmpfs: initialized
[ 0.093313] x86/mm: Memory block size: 128MB
[ 0.097064] PM: Registering ACPI NVS region [mem 0xcff98000-0xcffbbfff] (147456 bytes)
[ 0.097111] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.097117] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.097144] xor: measuring software checksum speed
[ 0.106979] prefetch64-sse: 16868.000 MB/sec
[ 0.116979] generic_sse: 14240.000 MB/sec
[ 0.116980] xor: using function: prefetch64-sse (16868.000 MB/sec)
[ 0.116982] pinctrl core: initialized pinctrl subsystem
[ 0.117090] RTC time: 5:35:25, date: 12/07/17
[ 0.117167] NET: Registered protocol family 16
[ 0.121004] cpuidle: using governor ladder
[ 0.125003] cpuidle: using governor menu
[ 0.125047] Simple Boot Flag at 0x36 set to 0x1
[ 0.125057] ACPI: bus type PCI registered
[ 0.125058] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.125130] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000)
[ 0.125132] PCI: MMCONFIG at [mem 0xf8000000-0xf90fffff] reserved in E820
[ 0.125143] PCI: Using configuration type 1 for base access
[ 0.125181] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.125181] mtrr: probably your BIOS does not setup all CPUs.
[ 0.125181] mtrr: corrected configuration.
[ 0.130036] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.147007] raid6: sse2x1 gen() 5320 MB/s
[ 0.164002] raid6: sse2x1 xor() 5146 MB/s
[ 0.181005] raid6: sse2x2 gen() 5296 MB/s
[ 0.198002] raid6: sse2x2 xor() 6302 MB/s
[ 0.215006] raid6: sse2x4 gen() 8890 MB/s
[ 0.232003] raid6: sse2x4 xor() 7152 MB/s
[ 0.232004] raid6: using algorithm sse2x4 gen() 8890 MB/s
[ 0.232005] raid6: .... xor() 7152 MB/s, rmw enabled
[ 0.232006] raid6: using ssse3x2 recovery algorithm
[ 0.232062] ACPI: Added _OSI(Module Device)
[ 0.232063] ACPI: Added _OSI(Processor Device)
[ 0.232064] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.232064] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.234216] ACPI: Dynamic OEM Table Load:
[ 0.234222] ACPI: SSDT 0xFFFF9CDDF4F6C600 0001DD (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.234386] ACPI: Dynamic OEM Table Load:
[ 0.234391] ACPI: SSDT 0xFFFF9CDDF4FA3000 00067D (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.234500] ACPI: Dynamic OEM Table Load:
[ 0.234500] ACPI: SSDT 0xFFFF9CDDF4F25C00 00016E (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.234500] ACPI: Dynamic OEM Table Load:
[ 0.234500] ACPI: SSDT 0xFFFF9CDDF4F0B480 000085 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.235244] ACPI: Interpreter enabled
[ 0.235256] ACPI: (supports S0 S3 S4 S5)
[ 0.235257] ACPI: Using IOAPIC for interrupt routing
[ 0.235278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240402] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.240406] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.240443] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20160831/dsfield-211)
[ 0.240535] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff9cddf5ca5438), AE_ALREADY_EXISTS (20160831/psparse-543)
[ 0.240651] acpi PNP0A03:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.240658] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
[ 0.240995] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xfffffffe window]; [mem 0xfed40000-0xfed4ffff window] ignored
[ 0.241141] PCI host bridge to bus 0000:00
[ 0.241142] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.241143] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.241144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.241145] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.241146] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.241147] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfffffffe window]
[ 0.241148] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff window]
[ 0.241150] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.241156] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[ 0.241173] DMAR: Forcing write-buffer flush capability
[ 0.241174] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.241250] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[ 0.241258] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit]
[ 0.241263] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.241266] pci 0000:00:02.0: reg 0x20: [io 0x1c70-0x1c77]
[ 0.241353] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[ 0.241360] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
[ 0.241462] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[ 0.241484] pci 0000:00:03.0: reg 0x10: [mem 0xfc524000-0xfc52400f 64bit]
[ 0.241567] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.241646] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[ 0.241657] pci 0000:00:03.2: reg 0x10: [io 0x1c88-0x1c8f]
[ 0.241662] pci 0000:00:03.2: reg 0x14: [io 0x1c7c-0x1c7f]
[ 0.241667] pci 0000:00:03.2: reg 0x18: [io 0x1c80-0x1c87]
[ 0.241672] pci 0000:00:03.2: reg 0x1c: [io 0x1c78-0x1c7b]
[ 0.241677] pci 0000:00:03.2: reg 0x20: [io 0x1c40-0x1c4f]
[ 0.241779] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[ 0.241789] pci 0000:00:03.3: reg 0x10: [io 0x1c90-0x1c97]
[ 0.241798] pci 0000:00:03.3: reg 0x14: [mem 0xfc526000-0xfc526fff]
[ 0.241990] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[ 0.242009] pci 0000:00:19.0: reg 0x10: [mem 0xfc500000-0xfc51ffff]
[ 0.242018] pci 0000:00:19.0: reg 0x14: [mem 0xfc527000-0xfc527fff]
[ 0.242026] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.242093] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.242144] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.242181] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[ 0.242225] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f]
[ 0.242321] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.242361] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[ 0.242405] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f]
[ 0.242500] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.242539] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[ 0.242582] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f]
[ 0.242677] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.242724] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[ 0.242740] pci 0000:00:1a.7: reg 0x10: [mem 0xfc528000-0xfc5283ff]
[ 0.242822] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.242871] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.242913] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[ 0.242931] pci 0000:00:1b.0: reg 0x10: [mem 0xfc520000-0xfc523fff 64bit]
[ 0.243017] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.243106] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[ 0.243150] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
[ 0.243244] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.243283] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[ 0.243326] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
[ 0.243421] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.243460] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[ 0.243503] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
[ 0.243599] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.243647] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[ 0.243664] pci 0000:00:1d.7: reg 0x10: [mem 0xfc529000-0xfc5293ff]
[ 0.243744] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.243793] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.243831] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.243931] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.243968] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[ 0.244141] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
[ 0.244158] pci 0000:00:1f.2: reg 0x10: [io 0x1ca8-0x1caf]
[ 0.244167] pci 0000:00:1f.2: reg 0x14: [io 0x1c9c-0x1c9f]
[ 0.244175] pci 0000:00:1f.2: reg 0x18: [io 0x1ca0-0x1ca7]
[ 0.244184] pci 0000:00:1f.2: reg 0x1c: [io 0x1c98-0x1c9b]
[ 0.244192] pci 0000:00:1f.2: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.244201] pci 0000:00:1f.2: reg 0x24: [mem 0xfc52a000-0xfc52a7ff]
[ 0.244251] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.244335] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[ 0.244351] pci 0000:00:1f.3: reg 0x10: [mem 0xfc52b000-0xfc52b0ff 64bit]
[ 0.244375] pci 0000:00:1f.3: reg 0x20: [io 0x1c20-0x1c3f]
[ 0.244534] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
[ 0.244544] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.244545] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.244546] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.244547] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.244548] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.244549] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfffffffe window] (subtractive decode)
[ 0.244550] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode)
[ 0.244812] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.244857] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.244901] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.244946] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.244991] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.245041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.245088] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.245134] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.245160] platform INT0800:00: failed to claim resource 0
[ 0.245190] acpi INT0800:00: platform device creation failed: -16
[ 0.245779] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.245853] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.245853] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245853] vgaarb: loaded
[ 0.245853] vgaarb: bridge control possible 0000:00:02.0
[ 0.246012] SCSI subsystem initialized
[ 0.246038] libata version 3.00 loaded.
[ 0.246112] PCI: Using ACPI for IRQ routing
[ 0.246610] PCI: pci_cache_line_size set to 64 bytes
[ 0.246663] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.246664] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.246665] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.246666] e820: reserve RAM buffer [mem 0x1fe000000-0x1ffffffff]
[ 0.246756] NetLabel: Initializing
[ 0.246756] NetLabel: domain hash size = 128
[ 0.246757] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246766] NetLabel: unlabeled traffic allowed by default
[ 0.246844] HPET: 8 timers in total, 2 timers will be used for per-cpu timer
[ 0.246853] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0
[ 0.246857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.248013] hpet: hpet2 irq 24 for MSI
[ 0.248022] hpet: hpet3 irq 25 for MSI
[ 0.248023] clocksource: Switched to clocksource hpet
[ 0.255796] VFS: Disk quotas dquot_6.6.0
[ 0.255815] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.255927] pnp: PnP ACPI init
[ 0.256162] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.256163] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.256165] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.256166] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.256167] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.256168] system 00:00: [io 0xfe00] has been reserved
[ 0.256170] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.256171] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.256172] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.256174] system 00:00: [mem 0xfed12000-0xfed12fff] has been reserved
[ 0.256175] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.256176] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.256178] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.256179] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.256180] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.256182] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.256183] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.256186] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256238] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.256501] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.256795] pnp 00:03: [dma 2]
[ 0.256823] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.257118] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257153] pnp 00:05: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.257181] pnp: PnP ACPI: found 6 devices
[ 0.264147] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.264163] pci 0000:00:1e.0: PCI bridge to [bus 11]
[ 0.264176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.264178] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
[ 0.264179] pci_bus 0000:00: resource 6 [mem 0x000d4000-0x000d7fff window]
[ 0.264180] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff window]
[ 0.264181] pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff window]
[ 0.264182] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfffffffe window]
[ 0.264183] pci_bus 0000:00: resource 10 [io 0x0d00-0xfdff window]
[ 0.264185] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window]
[ 0.264186] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window]
[ 0.264187] pci_bus 0000:11: resource 6 [mem 0x000d4000-0x000d7fff window]
[ 0.264188] pci_bus 0000:11: resource 7 [mem 0x000d8000-0x000dbfff window]
[ 0.264189] pci_bus 0000:11: resource 8 [mem 0x000dc000-0x000dffff window]
[ 0.264190] pci_bus 0000:11: resource 9 [mem 0xe0000000-0xfffffffe window]
[ 0.264191] pci_bus 0000:11: resource 10 [io 0x0d00-0xfdff window]
[ 0.264254] NET: Registered protocol family 2
[ 0.264421] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.264616] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.264941] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.264991] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.265044] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.265112] NET: Registered protocol family 1
[ 0.265124] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.266654] PCI: CLS 32 bytes, default 64
[ 0.266700] Trying to unpack rootfs image as initramfs...
[ 0.373013] random: fast init done
[ 0.383001] Freeing initrd memory: 8656K
[ 0.383092] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.383095] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff9cdccbf80000-ffff9cdccff7ffff]
[ 0.383786] workingset: timestamp_bits=56 max_order=21 bucket_order=0
[ 0.385436] zbud: loaded
[ 0.386594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.386620] io scheduler noop registered
[ 0.386621] io scheduler deadline registered
[ 0.386628] io scheduler cfq registered
[ 0.386658] io scheduler bfq registered (default)
[ 0.386659] BFQ I/O-scheduler: v8r12 (with cgroups support)
[ 0.386736] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.386740] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.386782] intel_idle: does not run on family 6 model 23
[ 0.386881] Monitor-Mwait will be used to enter C-1 state
[ 0.386885] Monitor-Mwait will be used to enter C-2 state
[ 0.386887] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.387836] GHES: HEST is not enabled!
[ 0.387898] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.408677] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.429366] 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A
[ 0.429516] Linux agpgart interface v0.103
[ 0.431933] brd: module loaded
[ 0.432080] ahci 0000:00:1f.2: version 3.0
[ 0.432291] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xb impl SATA mode
[ 0.432293] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part sxs
[ 0.432894] scsi host0: ahci
[ 0.432989] scsi host1: ahci
[ 0.433085] scsi host2: ahci
[ 0.433168] scsi host3: ahci
[ 0.433249] scsi host4: ahci
[ 0.433338] scsi host5: ahci
[ 0.433378] ata1: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a100 irq 26
[ 0.433380] ata2: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a180 irq 26
[ 0.433381] ata3: DUMMY
[ 0.433383] ata4: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a280 irq 26
[ 0.433383] ata5: DUMMY
[ 0.433384] ata6: DUMMY
[ 0.433435] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.435871] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.435874] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.436004] mousedev: PS/2 mouse device common for all mice
[ 0.436055] rtc_cmos 00:01: RTC can wake from S4
[ 0.436192] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.436217] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.436242] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.436365] Key type dns_resolver registered
[ 0.436366] mpls_gso: MPLS GSO support
[ 0.436490] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[ 0.436527] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.436648] registered taskstats version 1
[ 0.436660] zswap: loaded using pool lzo/zbud
[ 0.437056] Btrfs loaded, crc32c=crc32c-generic
[ 0.440389] Key type encrypted registered
[ 0.440608] Magic number: 13:120:567
[ 0.440611] misc network_latency: hash matches
[ 0.440713] rtc_cmos 00:01: setting system clock to 2017-12-07 05:35:26 UTC (1512624926)
[ 0.440747] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 0.440809] PM: Checking hibernation image partition UUID=ea3274ec-cf02-406d-b0a4-1b7a5692f585
[ 0.741505] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.896030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.896052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.896290] ata2.00: ATAPI: HL-DT-ST DVDROM DH40N, 1.05, max UDMA/100
[ 0.896947] ata2.00: configured for UDMA/100
[ 0.897413] ata1.00: ATA-8: Hitachi HUA722020ALA331, JKAOA3NH, max UDMA/133
[ 0.897415] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.898900] ata1.00: configured for UDMA/133
[ 0.899089] scsi 0:0:0:0: Direct-Access ATA Hitachi HUA72202 A3NH PQ: 0 ANSI: 5
[ 0.912165] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.912241] sd 0:0:0:0: [sda] Write Protect is off
[ 0.912242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.912262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.912868] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDROM DH40N 1.05 PQ: 0 ANSI: 5
[ 1.017574] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 1.018277] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.018286] PM: Hibernation image not present or could not be loaded.
[ 1.019604] Freeing unused kernel memory: 1420K
[ 1.019605] Write protecting the kernel read-only data: 12288k
[ 1.019876] Freeing unused kernel memory: 432K
[ 1.021831] Freeing unused kernel memory: 832K
[ 1.064736] dracut: dracut-044
[ 1.203505] [drm] Initialized
[ 1.210423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input2
[ 1.210426] ACPI: Power Button [PWRB]
[ 1.210474] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.210475] ACPI: Power Button [PWRF]
[ 1.256133] pci 0000:00:00.0: Intel Q45/Q43 Chipset
[ 1.256146] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.257392] pci 0000:00:00.0: detected 131072K stolen memory
[ 1.257430] [drm] Memory usable by graphics device = 2048M
[ 1.257433] [drm] Replacing VGA console driver
[ 1.258048] Console: switching to colour dummy device 80x25
[ 1.264082] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.264083] [drm] Driver supports precise vblank timestamp query.
[ 1.264348] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.266667] [drm] RC6 disabled, disabling runtime PM support
[ 1.351908] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 1.352030] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.352061] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 1.440026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b224f6b1f0, max_idle_ns: 440795243510 ns
[ 1.467226] fbcon: inteldrmfb (fb0) is primary device
[ 1.521643] Console: switching to colour frame buffer device 180x56
[ 1.540810] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.549213] dracut: Starting plymouth daemon
[ 1.727597] Uniform Multi-Platform E-IDE driver
[ 1.759807] ACPI: bus type USB registered
[ 1.759834] usbcore: registered new interface driver usbfs
[ 1.759843] usbcore: registered new interface driver hub
[ 1.762220] usbcore: registered new device driver usb
[ 1.773411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.773826] ehci-pci: EHCI PCI platform driver
[ 1.777513] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.777516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.777649] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.780154] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.780162] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.780178] ehci-pci 0000:00:1a.7: debug port 1
[ 1.784100] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 1.785775] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc528000
[ 1.792149] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.792207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.792209] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.792210] usb usb1: Product: EHCI Host Controller
[ 1.792211] usb usb1: Manufacturer: Linux 4.9.56-desktop-1.mga6 ehci_hcd
[ 1.792212] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.792331] hub 1-0:1.0: USB hub found
[ 1.792338] hub 1-0:1.0: 6 ports detected
[ 1.792619] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.792624] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.792635] ehci-pci 0000:00:1d.7: debug port 1
[ 1.796553] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.796568] ehci-pci 0000:00:1d.7: irq 16, io mem 0xfc529000
[ 1.803023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.803074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.803076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.803077] usb usb2: Product: EHCI Host Controller
[ 1.803078] usb usb2: Manufacturer: Linux 4.9.56-desktop-1.mga6 ehci_hcd
[ 1.803079] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.803189] hub 2-0:1.0: USB hub found
[ 1.803195] hub 2-0:1.0: 6 ports detected
[ 1.814538] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.814702] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.814708] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.814715] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.814736] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 1.814787] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.814789] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.814790] usb usb3: Product: UHCI Host Controller
[ 1.814791] usb usb3: Manufacturer: Linux 4.9.56-desktop-1.mga6 uhci_hcd
[ 1.814792] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.814888] hub 3-0:1.0: USB hub found
[ 1.814894] hub 3-0:1.0: 2 ports detected
[ 1.815089] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.815093] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.815099] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.815124] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860
[ 1.815163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.815164] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.815165] usb usb4: Product: UHCI Host Controller
[ 1.815166] usb usb4: Manufacturer: Linux 4.9.56-desktop-1.mga6 uhci_hcd
[ 1.815167] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.815265] hub 4-0:1.0: USB hub found
[ 1.815270] hub 4-0:1.0: 2 ports detected
[ 1.815440] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.815444] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.815449] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.815466] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880
[ 1.815504] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.815505] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.815506] usb usb5: Product: UHCI Host Controller
[ 1.815507] usb usb5: Manufacturer: Linux 4.9.56-desktop-1.mga6 uhci_hcd
[ 1.815508] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.815596] hub 5-0:1.0: USB hub found
[ 1.815601] hub 5-0:1.0: 2 ports detected
[ 1.815772] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.815775] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.815781] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.815798] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 1.815836] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.815837] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.815838] usb usb6: Product: UHCI Host Controller
[ 1.815839] usb usb6: Manufacturer: Linux 4.9.56-desktop-1.mga6 uhci_hcd
[ 1.815840] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.815929] hub 6-0:1.0: USB hub found
[ 1.815934] hub 6-0:1.0: 2 ports detected
[ 1.816139] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.816143] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.816148] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.816165] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 1.816210] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.816211] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.816212] usb usb7: Product: UHCI Host Controller
[ 1.816213] usb usb7: Manufacturer: Linux 4.9.56-desktop-1.mga6 uhci_hcd
[ 1.816214] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.816315] hub 7-0:1.0: USB hub found
[ 1.816320] hub 7-0:1.0: 2 ports detected
[ 1.816495] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.816500] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.816506] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.816523] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 1.816561] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.816563] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.816564] usb usb8: Product: UHCI Host Controller
[ 1.816565] usb usb8: Manufacturer: Linux 4.9.56-desktop-1.mga6 uhci_hcd
[ 1.816566] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.816659] hub 8-0:1.0: USB hub found
[ 1.817112] hub 8-0:1.0: 2 ports detected
[ 2.104024] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 2.112025] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.224453] usb 1-2: New USB device found, idVendor=058f, idProduct=6362
[ 2.224454] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.224456] usb 1-2: Product: Mass Storage Device
[ 2.224457] usb 1-2: Manufacturer: Generic
[ 2.224459] usb 1-2: SerialNumber: 058F312D81B
[ 2.249618] usb 2-1: New USB device found, idVendor=148f, idProduct=5372
[ 2.249620] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.249621] usb 2-1: Product: 802.11 n WLAN
[ 2.249623] usb 2-1: Manufacturer: Ralink
[ 2.390426] random: crng init done
[ 2.480025] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 2.638059] usb 8-1: New USB device found, idVendor=2a7a, idProduct=6a08
[ 2.638062] usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.638063] usb 8-1: Product: U
[ 2.651904] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.689254] usbcore: registered new interface driver usbhid
[ 2.689255] usbhid: USB HID core driver
[ 2.690533] input: U as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:2A7A:6A08.0001/input/input5
[ 2.742087] hid-generic 0003:2A7A:6A08.0001: input,hidraw0: USB HID v1.10 Keyboard [U] on usb-0000:00:1d.2-1/input0
[ 2.750120] input: U as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/0003:2A7A:6A08.0002/input/input6
[ 2.802102] hid-generic 0003:2A7A:6A08.0002: input,hidraw1: USB HID v1.10 Device [U] on usb-0000:00:1d.2-1/input1
[ 3.070219] PM: Starting manual resume from disk
[ 3.070222] PM: Hibernation image partition 8:11 present
[ 3.070222] PM: Looking for hibernation image.
[ 3.070458] PM: Image not found (code -22)
[ 3.070459] PM: Hibernation image not present or could not be loaded.
[ 3.107092] EXT4-fs (sda9): INFO: recovery required on readonly filesystem
[ 3.107094] EXT4-fs (sda9): write access will be enabled during recovery
[ 3.420023] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 3.996065] usb 8-2: New USB device found, idVendor=10c4, idProduct=8105
[ 3.996067] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.996068] usb 8-2: Product: USB OPTICAL MOUSE
[ 3.996069] usb 8-2: Manufacturer: YSPRINGTECH
[ 4.012354] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:10C4:8105.0003/input/input7
[ 4.012428] hid-generic 0003:10C4:8105.0003: input,hidraw2: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:1d.2-2/input0
[ 4.996220] EXT4-fs (sda9): orphan cleanup on readonly fs
[ 4.996283] EXT4-fs (sda9): 2 orphan inodes deleted
[ 4.996284] EXT4-fs (sda9): recovery complete
[ 5.064439] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[ 5.144670] dracut: Checking ext4: /dev/disk/by-uuid/5830f626-18ea-40d6-884a-748d839edaf9
[ 5.144811] dracut: issuing e2fsck -a /dev/disk/by-uuid/5830f626-18ea-40d6-884a-748d839edaf9
[ 5.190914] dracut: /dev/disk/by-uuid/5830f626-18ea-40d6-884a-748d839edaf9: clean, 228617/2445984 files, 2607213/9764864 blocks
[ 5.192293] dracut: Mounting /dev/disk/by-uuid/5830f626-18ea-40d6-884a-748d839edaf9 with -o rw,relatime,data=ordered,ro
[ 5.252613] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[ 5.565514] dracut: Mounted root filesystem /dev/sda9
[ 5.761580] dracut: Switching root
[ 5.801077] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 6.432648] NET: Registered protocol family 10
[ 6.468493] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.468617] systemd[1]: Detected architecture x86-64.
[ 6.487113] systemd[1]: Set hostname to <localhost>.
[ 7.254915] systemd[1]: Received SIGRTMIN+20 from PID 294 (plymouthd).
[ 7.255736] systemd[1]: Listening on Process Core Dump Socket.
[ 7.255795] systemd[1]: Reached target Encrypted Volumes.
[ 7.255882] systemd[1]: Listening on Network Service Netlink Socket.
[ 7.317375] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.317535] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.317595] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.181045] EXT4-fs (sda9): re-mounted. Opts: (null)
[ 8.523169] systemd-journald[494]: File /var/log/journal/4013ca55148343baad440e3b39646600/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 8.759025] systemd-journald[494]: Received request to flush runtime journal from PID 1
[ 9.355063] tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 9.559159] wmi: Mapper loaded
[ 9.567347] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 9.581810] pps_core: LinuxPPS API ver. 1 registered
[ 9.581812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.613625] PTP clock support registered
[ 9.722545] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB.PCI0.LPC0.PMIO) (20160831/utaddress-247)
[ 9.722551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.722553] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB.PCI0.LPC0.GPOX) (20160831/utaddress-247)
[ 9.722556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.722580] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.870160] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.870161] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.870356] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 10.069108] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:1d:ac:2e:9a
[ 10.069110] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 10.070755] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
[ 10.118296] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 10.118429] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 10.149824] ppdev: user-space parallel port driver
[ 10.283260] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 10.283342] scsi host6: usb-storage 1-2:1.0
[ 10.283685] usbcore: registered new interface driver usb-storage
[ 10.308787] usbcore: registered new interface driver uas
[ 10.313119] iTCO_vendor_support: vendor-support=0
[ 10.322611] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.322651] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060)
[ 10.322823] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 10.350487] intel_powerclamp: No package C-state available
[ 10.362551] intel_powerclamp: No package C-state available
[ 10.403191] gpio_ich: GPIO from 440 to 511 on gpio_ich
[ 10.923995] fuse init (API version 7.26)
[ 10.961504] snd_hda_codec_analog hdaudioC0D2: autoconfig for AD1882: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 10.961506] snd_hda_codec_analog hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 10.961507] snd_hda_codec_analog hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 10.961508] snd_hda_codec_analog hdaudioC0D2: mono: mono_out=0x0
[ 10.961509] snd_hda_codec_analog hdaudioC0D2: inputs:
[ 10.961511] snd_hda_codec_analog hdaudioC0D2: Front Mic=0x14
[ 10.961512] snd_hda_codec_analog hdaudioC0D2: Rear Mic=0x17
[ 10.961513] snd_hda_codec_analog hdaudioC0D2: Line=0x15
[ 10.961514] snd_hda_codec_analog hdaudioC0D2: CD=0x18
[ 10.968585] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 10.974065] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.974777] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.974832] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.974886] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.974944] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 10.974997] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.296845] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 11.300699] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.301033] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 11.302576] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 11.305956] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 11.311333] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 11.315462] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 11.319453] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 12.218036] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 12.347499] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[ 12.375740] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
[ 12.416812] Adding 6788092k swap on /dev/sda11. Priority:-1 extents:1 across:6788092k FS
[ 12.477563] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.477977] usbcore: registered new interface driver rt2800usb
[ 12.591866] rt2800usb 2-1:1.0 wlp0s29f7u1: renamed from wlan0
[ 14.989509] device-mapper: uevent: version 1.0.3
[ 14.991182] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 19.122495] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 19.591383] RPC: Registered named UNIX socket transport module.
[ 19.591384] RPC: Registered udp transport module.
[ 19.591385] RPC: Registered tcp transport module.
[ 19.591385] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.204699] vboxdrv: loading out-of-tree module taints kernel.
[ 25.208556] vboxdrv: Found 2 processor cores
[ 25.217683] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x58e
[ 25.317804] vboxdrv: TSC mode is Synchronous, tentative frequency 2992460788 Hz
[ 25.317805] vboxdrv: Successfully loaded version 5.1.30 (interface 0x002a0000)
[ 25.425775] VBoxNetFlt: Successfully started.
[ 25.472887] VBoxNetAdp: Successfully started.
[ 25.544193] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 25.926933] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 25.968143] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 26.174160] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u1: link is not ready
[ 26.813071] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u1: link is not ready
[ 26.932178] NET: Registered protocol family 17
[ 28.056361] wlp0s29f7u1: authenticate with c4:04:15:1e:af:69
[ 28.093399] wlp0s29f7u1: send auth to c4:04:15:1e:af:69 (try 1/3)
[ 28.095403] wlp0s29f7u1: authenticated
[ 28.096048] wlp0s29f7u1: associate with c4:04:15:1e:af:69 (try 1/3)
[ 28.100408] wlp0s29f7u1: RX AssocResp from c4:04:15:1e:af:69 (capab=0x1411 status=0 aid=4)
[ 28.108777] wlp0s29f7u1: associated
[ 28.108808] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u1: link becomes ready
[ 35.752280] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.164744] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 38.238794] Netfilter messages via NETLINK v0.30.
[ 38.241387] ctnetlink v0.93: registering with nfnetlink.
[ 38.453381] xt_CT: No such helper "snmp"
[ 38.472331] xt_CT: No such helper "pptp"
[ 38.478885] xt_CT: No such helper "irc"
[ 38.482526] xt_CT: No such helper "irc-0"
[ 38.486237] xt_CT: No such helper "netbios-ns"
[ 38.759273] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 39.150452] xt_addrtype: ipv6 does not support BROADCAST matching
[ 198.548360] usb 1-2: USB disconnect, device number 2
[ 201.968062] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 202.087780] usb 1-2: New USB device found, idVendor=154b, idProduct=007a
[ 202.087782] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 202.087784] usb 1-2: Product: USB 2.0 FD
[ 202.087785] usb 1-2: Manufacturer: PNY Technologies
[ 202.087787] usb 1-2: SerialNumber: AD7AHE03000002207
[ 202.088627] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 202.088731] scsi host6: usb-storage 1-2:1.0
[ 203.601440] scsi 6:0:0:0: Direct-Access PNY USB 2.0 FD 1100 PQ: 0 ANSI: 4
[ 203.602928] sd 6:0:0:0: [sdb] 15950592 512-byte logical blocks: (8.17 GB/7.61 GiB)
[ 203.604550] sd 6:0:0:0: [sdb] Write Protect is off
[ 203.604552] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 203.605300] sd 6:0:0:0: [sdb] No Caching mode page found
[ 203.605303] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 203.609823] sdb: sdb1 sdb2
[ 203.612572] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 214.492333] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 214.494208] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 214.515958] ISO 9660 Extensions: RRIP_1991A
Can someone help? I am seeing some resource conflict in the above dmesg output, but not sure how to address it.
Thanks,
Balaji.
