Mageia forum

Mageia2 beta 3 x89_64
Needed 3.12.4 for my Hp officejet pro 8600 plus.
1. downloaded source from hp
2. used to following from an hp 'mandriva 2010.0 and above' howto:

su - -c "urpmi --allow-force --force --auto cups cups-common libcups2-devel libcups2 libdbus-1-devel python-gobject gcc-c++ ghostscript libopenssl0.9.8-devel libjpeg-devel libnet-snmp-devel glibc-i18ndata glibc_lsb libtool libgphoto-devel libusb1.0-devel make python-imaging policykit policykit-gnome python-qt4 qt4-qtdbus python-dbus libpython2.6-devel python python-reportlab saned libsane1-devel sane-backends libsane1 xsane sane-frontends"

later in that script, used:
64 bit distro users:
./configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib64 --prefix=/usr --enable-qt4 --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build

get most of the way there, then:
checking for net-snmp/net-snmp-config.h... yes
checking for cupsDoFileRequest in -lcups... no
configure: error: cannot find libcups support

package seems to be there:
# urpmi libcups2
Package libcups2-1.5.2-3.mga2.i586 is already installed

Thought it wanted the 64 bit lib, installed it:
# urpmi lib64cups2
Package lib64cups2-1.5.2-3.mga2.x86_64 is already installed


This process worked on mageia1, don't know why its failing in m2beta3. Ideas?

You need the devel package
lib64cups2-devel

installled it at some point:
# urpmi lib64cups2-devel
Package lib64cups2-devel-1.5.2-3.mga2.x86_64 is already installed


configure runs OK for a while, then:

checking for host machine platform... x86_64
checking for CRYPTO_free in -lcrypto... yes
checking for snmp_timeout in -lnetsnmp... no
checking for snmp_timeout in -lsnmp... no
configure: error: cannot find net/ucd-snmp support (or --disable-network-build)

So: tracked down that I needed:
# urpmi lib64net-snmp-devel
To satisfy dependencies, the following packages are going to be installed:
Package Version Release Arch
(medium "Core Release (distrib1)")
lib64lm_sensors-devel 3.3.2 5.mga2 x86_64
lib64net-snmp-devel 5.7.1 1.mga2 x86_64
lib64wrap-devel 7.6 42.mga1 x86_64

completes, re-run config, terminates with same error message as above.
Could use some further ideas!

Just shooting in the dark here but have you got net-snmp and libnet-snmp installed?

Do you have any particular reason to install hplip from source, if i may ask?

If you look in the spec file for the Mageia package in SVN you can see what packages are needed to build hplip

Code: Select all

96   BuildRequires:  python-sip >= 4.1.1
97   BuildRequires:  net-snmp-devel
98   BuildRequires:  libusb-devel >= 0.1.8
99   BuildRequires:  imagemagick
100   BuildRequires:  autoconf
101   BuildRequires:  libcups-devel
102   BuildRequires:  libjpeg-devel
103   BuildRequires:  python-devel
104   BuildRequires:  desktop-file-utils
105   BuildRequires:  libdbus-devel
106   BuildRequires:  udev-devel
107   BuildRequires:  polkit
108   BuildRequires:  gphoto2-devel
109   BuildRequires:  libv4l-devel

http://svnweb.mageia.org/packages/cauldron/hplip/current/SPECS/hplip.spec?revision=228566&view=markup

Maybe the easiest way to pull all required dependencies would be to download the src.rpm and use urpmi to get all in one go, like so:

Code: Select all

wget ftp://ftp.mandrivauser.de/mirrors/Mageia/distrib/cauldron/SRPMS/core/release/hplip-3.12.2-3.mga2.src.rpm && urpmi --buildrequires hplip-3.12.2-3.mga2.src.rpm

I also need this version of hplip for the m1132 HP printer.
So i already attemped to build the hplip 3.12.4.
I download as you proposed the src rpm.
Then i tried the first step of the hplip 3.12.4 installation process as explained :
http://hplipopensource.com/hplip-web/in ... driva.html
At the step of the ./configure process, i get the following message :

Code: Select all

checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes                   
checking for memory.h... yes                   
checking for strings.h... yes                   
checking for inttypes.h... yes                 
checking for stdint.h... yes                                                             
checking for unistd.h... yes                                                                     
checking dlfcn.h usability... yes                                                                       
checking dlfcn.h presence... yes                                                                                   
checking for dlfcn.h... yes                                                                                       
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for pthread_create in -lpthread... yes
checking for pow in -lm... yes
checking for jpeg_set_defaults in -ljpeg... yes
checking for dlopen in -ldl... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking whether byte ordering is bigendian... no
checking for uint32_t... yes
checking "for platform-dependencies"... "using Default platform.h"
checking for documentation build... yes
checking for hpijs only build... no
checking for lite build... no
checking for hpcups only build... no
checking for hpijs install... no
checking for hpcups install... yes
checking for new hpcups install... no
checking for network build... yes
checking for parallel port build... no
checking for scanner build... yes
checking for gui build... yes
checking for fax build... yes
checking for dbus build... yes
checking for cups 1.1.x build... no
checking for udev acl rules... no
checking for shadow build... no
checking for foomatic ppd install... no
checking for foomatic drv install... no
checking for cups drv install... yes
checking for cups ppd install... no
checking for foomatic-rip-hplip install... no
checking for qt4... yes
checking for qt3... no
checking for policykit... no
checking for host machine platform... x86_32
checking for CRYPTO_free in -lcrypto... yes
checking for snmp_timeout in -lnetsnmp... yes
checking net-snmp/net-snmp-config.h usability... yes
checking net-snmp/net-snmp-config.h presence... yes
checking for net-snmp/net-snmp-config.h... yes
checking for cupsDoFileRequest in -lcups... yes
checking cups/cups.h usability... yes
checking cups/cups.h presence... yes
checking for cups/cups.h... yes
checking for usb_init in -lusb... no
configure: error: cannot find libusb support

However I installed all libusb available from cauldron

What am I doing wrong ?

Looking for libusb :
libusb-compat0.1-devel-0.1.3-6.mga2.i586 already installed
Is this one the expected version ?

I got it built. See the scripts I put in the original post, see also the packages listed a little above this. In addition to those packages, I also needed to install libsane-devel. Don't recall if these was anything else just for usb.

From the look of your ./configure script output, these are quite a few 'no' responses, so suggest you do all this and re-try.
It works, but you do have to follow the post-install things in the HP script I think I referenced originally.

No, I hadn't put in the HP reference, but you'll need to do the stuff at the end of this after building and installing:

http://hplipopensource.com/hplip-web/in ... driva.html

I've bug-reported this and with any luck the 3.12.4 version will be in the RC due out in days, so you could wait until then.

https://bugs.mageia.org/show_bug.cgi?id=5619

Many thanks for the suggestions. I will wait for RC.

FWIW Thomas Backlund was so kind and pushed new hplip-3.12.4 packages to core/updates_testing in cauldron so people could actually test.

So guys and gals, please test and give some feedback. The plugin issue which Serge reported is still unfixed because i need help in diagnosing the cause of this, or at least the terminal output of the plugin installation, hopefully showing some error message.

Mika Laitio already reported it to be working fine with an HP Color laserjet-cm1312nfi

The plugin issue which Serge reported is still unfixed because i need help in diagnosing the cause of this, or at least the terminal output of the plugin installation, hopefully showing some error message.

Many thanks for your help. I will be able to test the RC at the beginning of next week with the HP m1132. Could you explain me how to get efficient error messages during plugin installation ?

Run the plugin installation from a terminal, probably like this:

Code: Select all

hp-plugin -g

This enables debug logging level and will hopefully provide helpful insight what the problem is.
Maybe you need to run this as root, but first try as a normal user and post the results in the bugreport.