Posted: May 30th, '20, 03:10Posted: May 30th, '20, 07:38Posted: May 30th, '20, 11:15journalctl -absystemd-analyze
systemd-analyze blamePosted: May 30th, '20, 15:41Posted: Dec 31st, '21, 18:58[ 0.494675] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20210730/nsarguments-162)[ 0.032777] ACPI: SSDT 0x000000007F6EE000 0004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.032785] ACPI: SSDT 0x000000007F6ED000 000232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.032792] ACPI: Reserving FACP table memory at [mem 0x7f6fd000-0x7f6fd0f3]
[ 0.032796] ACPI: Reserving DSDT table memory at [mem 0x7f6f4000-0x7f6fc967]
[ 0.032799] ACPI: Reserving FACS table memory at [mem 0x7f675000-0x7f67503f]
[ 0.032802] ACPI: Reserving FACS table memory at [mem 0x7f675000-0x7f67503f]
[ 0.032804] ACPI: Reserving APIC table memory at [mem 0x7f6f3000-0x7f6f3067]
[ 0.032807] ACPI: Reserving MCFG table memory at [mem 0x7f6f2000-0x7f6f203b]
[ 0.032809] ACPI: Reserving SLIC table memory at [mem 0x7f6f1000-0x7f6f1175]
[ 0.032812] ACPI: Reserving HPET table memory at [mem 0x7f6f0000-0x7f6f0037]
[ 0.032815] ACPI: Reserving SSDT table memory at [mem 0x7f6ef000-0x7f6ef5d6]
[ 0.032817] ACPI: Reserving SSDT table memory at [mem 0x7f6ee000-0x7f6ee4c3]
[ 0.032820] ACPI: Reserving SSDT table memory at [mem 0x7f6ed000-0x7f6ed231]
[ 0.032848] 1230MB HIGHMEM available.
[ 0.032851] 807MB LOWMEM available.
[ 0.032853] mapped low ram: 0 - 327fe000
[ 0.032854] low ram: 0 - 327fe000
[ 0.032878] Zone ranges:
[ 0.032880] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.032885] Normal [mem 0x0000000001000000-0x00000000327fdfff]
[ 0.032889] HighMem [mem 0x00000000327fe000-0x000000007f671fff]
[ 0.032892] Movable zone start for each node
[ 0.032894] Early memory node ranges
[ 0.032895] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.032898] node 0: [mem 0x0000000000100000-0x000000007f4fcfff]
[ 0.032901] node 0: [mem 0x000000007f508000-0x000000007f551fff]
[ 0.032904] node 0: [mem 0x000000007f555000-0x000000007f5bafff]
[ 0.032906] node 0: [mem 0x000000007f5bf000-0x000000007f671fff]
[ 0.032910] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f671fff]
[ 0.032928] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.033036] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.046790] On node 0, zone HighMem: 11 pages in unavailable ranges
[ 0.046797] On node 0, zone HighMem: 3 pages in unavailable ranges
[ 0.046805] On node 0, zone HighMem: 4 pages in unavailable ranges
[ 0.046813] Using APIC driver default
[ 0.046827] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
[ 0.047281] ACPI: PM-Timer IO Port: 0x408
[ 0.047295] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.047299] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.047315] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.047321] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.047326] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.047333] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.047336] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.047347] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.047394] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.047399] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.047401] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.047403] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.047407] PM: hibernation: Registered nosave memory: [mem 0x7f4fd000-0x7f507fff]
[ 0.047411] PM: hibernation: Registered nosave memory: [mem 0x7f552000-0x7f554fff]
[ 0.047415] PM: hibernation: Registered nosave memory: [mem 0x7f5bb000-0x7f5befff]
[ 0.047419] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.047422] Booting paravirtualized kernel on bare hardware
[ 0.047430] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.047444] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.047712] percpu: Embedded 32 pages/cpu s100300 r0 d30772 u131072
[ 0.047726] pcpu-alloc: s100300 r0 d30772 u131072 alloc=32*4096
[ 0.047732] pcpu-alloc: [0] 0 [0] 1
[ 0.047775] Built 1 zonelists, mobility grouping on. Total pages: 520110
[ 0.047781] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.11-desktop-3.mga8 root=UUID=678ba0a3-c052-4f48-a7cb-75e98bf20359 ro splash quiet noiswmd resume=UUID=de844a8e-a1f0-43e2-95c9-9e9123ad570a audit=0 vga=791
[ 0.048110] audit: disabled (until reboot)
[ 0.048162] Unknown kernel command line parameters "splash noiswmd BOOT_IMAGE=/boot/vmlinuz-5.15.11-desktop-3.mga8 vga=791", will be passed to user space.
[ 0.048483] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.048619] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.048682] microcode: microcode updated early to revision 0x44, date = 2010-10-04
[ 0.048692] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.048699] Initializing HighMem for node 0 (000327fe:0007f672)
[ 0.161324] Initializing Movable for node 0 (00000000:00000000)
[ 0.166707] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.166725] Memory: 2034240K/2086904K available (10217K kernel code, 1415K rwdata, 4160K rodata, 940K init, 520K bss, 52664K reserved, 0K cma-reserved, 1259912K highmem)
[ 0.166819] random: get_random_u32 called from cache_random_seq_create+0x7e/0x130 with crng_init=0
[ 0.166994] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.167014] Kernel/User page tables isolation: enabled
[ 0.167033] ftrace: allocating 39145 entries in 77 pages
[ 0.190443] ftrace: allocated 77 pages with 4 groups
[ 0.190547] trace event string verifier disabled
[ 0.190659] rcu: Hierarchical RCU implementation.
[ 0.190662] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.190665] Rude variant of Tasks RCU enabled.
[ 0.190667] Tracing variant of Tasks RCU enabled.
[ 0.190669] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.190671] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.205130] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.205488] Console: colour dummy device 80x25
[ 0.205521] printk: console [tty0] enabled
[ 0.205538] ACPI: Core revision 20210730
[ 0.205726] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.205750] APIC: Switch to symmetric I/O mode setup
[ 0.205754] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.206235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.210750] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x18ec0c42d75, max_idle_ns: 440795212242 ns
[ 0.210764] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.93 BogoMIPS (lpj=1728968)
[ 0.210769] pid_max: default: 32768 minimum: 301
[ 0.210832] LSM: Security Framework initializing
[ 0.210861] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.210869] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.211332] CPU0: Thermal monitoring enabled (TM1)
[ 0.211357] process: using mwait in idle threads
[ 0.211369] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.211372] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.211379] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.211383] Spectre V2 : Mitigation: Full generic retpoline
[ 0.211385] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.211387] Speculative Store Bypass: Vulnerable
[ 0.211392] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.324042] smpboot: CPU0: Intel(R) Celeron(R) CPU 530 @ 1.73GHz (family: 0x6, model: 0x16, stepping: 0x1)
[ 0.324289] Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.324304] ... version: 2
[ 0.324306] ... bit width: 40
[ 0.324308] ... generic registers: 2
[ 0.324310] ... value mask: 000000ffffffffff
[ 0.324312] ... max period: 000000007fffffff
[ 0.324314] ... fixed-purpose events: 3
[ 0.324315] ... event mask: 0000000700000003
[ 0.324460] rcu: Hierarchical SRCU implementation.
[ 0.324756] smp: Bringing up secondary CPUs ...
[ 0.324756] smp: Brought up 1 node, 1 CPU
[ 0.324756] smpboot: Max logical packages: 2
[ 0.324756] smpboot: Total of 1 processors activated (3457.93 BogoMIPS)
[ 0.325042] devtmpfs: initialized
[ 0.326038] ACPI: PM: Registering ACPI NVS region [mem 0x7f672000-0x7f6befff] (315392 bytes)
[ 0.326141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.326148] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.326232] pinctrl core: initialized pinctrl subsystem
[ 0.326404] PM: RTC time: 15:01:48, date: 2021-12-31
[ 0.326623] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.327130] thermal_sys: Registered thermal governor 'fair_share'
[ 0.327132] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.327135] thermal_sys: Registered thermal governor 'step_wise'
[ 0.327136] thermal_sys: Registered thermal governor 'user_space'
[ 0.327144] cpuidle: using governor ladder
[ 0.327147] cpuidle: using governor menu
[ 0.327347] ACPI: bus type PCI registered
[ 0.327350] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.327497] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.327507] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.327510] PCI: Using MMCONFIG for extended config space
[ 0.327516] PCI: Using configuration type 1 for base access
[ 0.329919] Kprobes globally optimized
[ 0.330093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.347761] raid6: sse2x2 gen() 5739 MB/s
[ 0.364758] raid6: sse2x2 xor() 3635 MB/s
[ 0.381758] raid6: sse2x1 gen() 5102 MB/s
[ 0.398760] raid6: sse2x1 xor() 3387 MB/s
[ 0.415762] raid6: sse1x2 gen() 3270 MB/s
[ 0.432763] raid6: sse1x1 gen() 2689 MB/s
[ 0.432765] raid6: using algorithm sse2x2 gen() 5739 MB/s
[ 0.432768] raid6: .... xor() 3635 MB/s, rmw enabled
[ 0.432770] raid6: using ssse3x1 recovery algorithm
[ 0.432901] ACPI: Added _OSI(Module Device)
[ 0.432904] ACPI: Added _OSI(Processor Device)
[ 0.432906] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.432908] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.432911] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.432913] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.432916] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.439954] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.441057] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.442856] ACPI: EC: EC started
[ 0.442859] ACPI: EC: interrupt blocked
[ 0.455836] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.455841] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions
[ 0.455845] ACPI: Interpreter enabled
[ 0.455883] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.455885] ACPI: Using IOAPIC for interrupt routing
[ 0.455925] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.455928] PCI: Using E820 reservations for host bridge windows
[ 0.456274] ACPI: Enabled 14 GPEs in block 00 to 1F
[ 0.494651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.494665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.494675] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20210730/nsarguments-162)
[ 0.494777] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_TYPE)
[ 0.495447] PCI host bridge to bus 0000:00
[ 0.495450] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.495455] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.495458] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.495461] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.495465] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.495543] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.495836] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.495854] pci 0000:00:02.0: reg 0x10: [mem 0x94000000-0x940fffff 64bit]
[ 0.495867] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.495875] pci 0000:00:02.0: reg 0x20: [io 0x5110-0x5117]
[ 0.496079] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.496096] pci 0000:00:02.1: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 0.496414] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.496485] pci 0000:00:1a.0: reg 0x20: [io 0x50c0-0x50df]
[ 0.496737] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.496813] pci 0000:00:1a.1: reg 0x20: [io 0x50a0-0x50bf]
[ 0.497085] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.497111] pci 0000:00:1a.7: reg 0x10: [mem 0x98304c00-0x98304fff]
[ 0.497232] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.497484] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.497516] pci 0000:00:1b.0: reg 0x10: [mem 0x98300000-0x98303fff 64bit]
[ 0.497658] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.497930] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.498083] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.498355] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.498508] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.498784] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.498936] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.499204] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.499356] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.499620] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.499691] pci 0000:00:1d.0: reg 0x20: [io 0x5080-0x509f]
[ 0.499950] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.500020] pci 0000:00:1d.1: reg 0x20: [io 0x5060-0x507f]
[ 0.500273] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.500344] pci 0000:00:1d.2: reg 0x20: [io 0x5040-0x505f]
[ 0.500613] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.500639] pci 0000:00:1d.7: reg 0x10: [mem 0x98304800-0x98304bff]
[ 0.500764] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.501005] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.501326] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.501457] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.501465] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.501473] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[ 0.501478] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.501746] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.501775] pci 0000:00:1f.1: reg 0x10: [io 0x5108-0x510f]
[ 0.501790] pci 0000:00:1f.1: reg 0x14: [io 0x5124-0x5127]
[ 0.501805] pci 0000:00:1f.1: reg 0x18: [io 0x5100-0x5107]
[ 0.501819] pci 0000:00:1f.1: reg 0x1c: [io 0x5120-0x5123]
[ 0.501833] pci 0000:00:1f.1: reg 0x20: [io 0x50e0-0x50ef]
[ 0.501863] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.501866] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.501869] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.501872] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.502110] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.502136] pci 0000:00:1f.2: reg 0x10: [io 0x50f8-0x50ff]
[ 0.502150] pci 0000:00:1f.2: reg 0x14: [io 0x511c-0x511f]
[ 0.502164] pci 0000:00:1f.2: reg 0x18: [io 0x50f0-0x50f7]
[ 0.502178] pci 0000:00:1f.2: reg 0x1c: [io 0x5118-0x511b]
[ 0.502193] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 0.502207] pci 0000:00:1f.2: reg 0x24: [mem 0x98304000-0x983047ff]
[ 0.502278] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.502459] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.502485] pci 0000:00:1f.3: reg 0x10: [mem 0x98305000-0x983050ff]
[ 0.502534] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 0.502795] acpiphp: Slot [1] registered
[ 0.502803] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.502810] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.502817] pci 0000:00:1c.0: bridge window [mem 0x97300000-0x982fffff]
[ 0.502827] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.502907] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.502914] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.502920] pci 0000:00:1c.1: bridge window [mem 0x96300000-0x972fffff]
[ 0.502930] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.503130] pci 0000:05:00.0: [14e4:1713] type 00 class 0x020000
[ 0.503211] pci 0000:05:00.0: reg 0x10: [mem 0x95200000-0x9520ffff 64bit]
[ 0.503395] pci 0000:05:00.0: enabling Extended Tags
[ 0.503671] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.504085] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.504093] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.504099] pci 0000:00:1c.2: bridge window [mem 0x95200000-0x962fffff]
[ 0.504109] pci 0000:00:1c.2: bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[ 0.504232] pci 0000:06:00.0: [168c:001c] type 00 class 0x020000
[ 0.504275] pci 0000:06:00.0: reg 0x10: [mem 0x94100000-0x9410ffff 64bit]
[ 0.504635] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.504652] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.504658] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.504665] pci 0000:00:1c.3: bridge window [mem 0x94100000-0x951fffff]
[ 0.504674] pci 0000:00:1c.3: bridge window [mem 0x93000000-0x93ffffff 64bit pref]
[ 0.504707] pci_bus 0000:07: extended config space not accessible
[ 0.504808] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.504825] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.504829] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.504832] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.504835] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.504880] pci_bus 0000:00: on NUMA node 0
[ 0.505094] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.505202] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.505306] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.505409] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.505512] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.505515] ACPI: PCI: Interrupt link LNKE disabled
[ 0.505618] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[ 0.505721] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.505831] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.535569] ACPI: EC: interrupt unblocked
[ 0.535573] ACPI: EC: event unblocked
[ 0.535580] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.535583] ACPI: EC: GPE=0x1c
[ 0.535586] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC initialization complete
[ 0.535590] ACPI: \_SB_.PCI0.LPC_.EC0_: EC: Used to handle transactions and events
[ 0.535665] iommu: Default domain type: Translated
[ 0.535668] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.535726] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.535730] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.535740] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.535743] vgaarb: loaded
[ 0.536107] SCSI subsystem initialized
[ 0.536184] libata version 3.00 loaded.
[ 0.536294] EDAC MC: Ver: 3.0.0
[ 0.536800] NetLabel: Initializing
[ 0.536803] NetLabel: domain hash size = 128
[ 0.536805] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.536827] NetLabel: unlabeled traffic allowed by default
[ 0.536829] PCI: Using ACPI for IRQ routing
[ 0.549101] PCI: pci_cache_line_size set to 64 bytes
[ 0.549269] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.549273] e820: reserve RAM buffer [mem 0x7f4fd000-0x7fffffff]
[ 0.549276] e820: reserve RAM buffer [mem 0x7f552000-0x7fffffff]
[ 0.549279] e820: reserve RAM buffer [mem 0x7f5bb000-0x7fffffff]
[ 0.549281] e820: reserve RAM buffer [mem 0x7f672000-0x7fffffff]
[ 0.549543] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.549548] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.549557] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.550796] clocksource: Switched to clocksource tsc-early
[ 0.565640] VFS: Disk quotas dquot_6.6.0
[ 0.565674] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.565766] pnp: PnP ACPI init
[ 0.566194] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.566288] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.566293] system 00:00: [io 0x0610] has been reserved
[ 0.566296] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.566300] system 00:00: [io 0x0810-0x0817] has been reserved
[ 0.566303] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.566307] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.566311] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.566318] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.566323] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.566328] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.566333] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.566337] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.566342] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.566346] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.566350] system 00:00: [mem 0x32000000-0x320000ff] could not be reserved
[ 0.613139] pnp: PnP ACPI: found 4 devices
[ 0.613147] PnPBIOS: Disabled by ACPI PNP
[ 0.649916] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.650039] NET: Registered PF_INET protocol family
[ 0.650145] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.650570] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.650583] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.650602] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.650631] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.650679] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.650691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.650756] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.650766] NET: Registered PF_XDP protocol family
[ 0.650801] pci 0000:00:02.1: BAR 0: assigned [mem 0x98400000-0x984fffff 64bit]
[ 0.650817] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.650822] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.650830] pci 0000:00:1c.0: bridge window [mem 0x97300000-0x982fffff]
[ 0.650837] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.650847] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.650851] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.650858] pci 0000:00:1c.1: bridge window [mem 0x96300000-0x972fffff]
[ 0.650865] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.650875] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.650879] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.650887] pci 0000:00:1c.2: bridge window [mem 0x95200000-0x962fffff]
[ 0.650893] pci 0000:00:1c.2: bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[ 0.650918] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.650923] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.650930] pci 0000:00:1c.3: bridge window [mem 0x94100000-0x951fffff]
[ 0.650937] pci 0000:00:1c.3: bridge window [mem 0x93000000-0x93ffffff 64bit pref]
[ 0.650947] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.650966] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.650969] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.650972] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.650976] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.650979] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.650982] pci_bus 0000:02: resource 1 [mem 0x97300000-0x982fffff]
[ 0.650985] pci_bus 0000:02: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.650989] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.650992] pci_bus 0000:04: resource 1 [mem 0x96300000-0x972fffff]
[ 0.650995] pci_bus 0000:04: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.650999] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.651002] pci_bus 0000:05: resource 1 [mem 0x95200000-0x962fffff]
[ 0.651005] pci_bus 0000:05: resource 2 [mem 0x92000000-0x92ffffff 64bit pref]
[ 0.651009] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.651012] pci_bus 0000:06: resource 1 [mem 0x94100000-0x951fffff]
[ 0.651015] pci_bus 0000:06: resource 2 [mem 0x93000000-0x93ffffff 64bit pref]
[ 0.651019] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
[ 0.651022] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
[ 0.651025] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.651028] pci_bus 0000:07: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.651229] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.654025] PCI: CLS 0 bytes, default 64
[ 0.654106] Trying to unpack rootfs image as initramfs...
[ 0.661261] sta2x11_mfd_init
[ 0.661549] apm: BIOS not found.
[ 0.662048] Initialise system trusted keyrings
[ 0.662137] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 0.665026] zbud: loaded
[ 0.747114] xor: measuring software checksum speed
[ 0.748429] pIII_sse : 7588 MB/sec
[ 0.749562] prefetch64-sse : 8740 MB/sec
[ 0.749565] xor: using function: prefetch64-sse (8740 MB/sec)
[ 0.750096] Key type asymmetric registered
[ 0.750100] Asymmetric key parser 'x509' registered
[ 0.750178] bounce: pool size: 64 pages
[ 0.750227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.752249] io scheduler mq-deadline registered
[ 0.752252] io scheduler kyber registered
[ 0.752318] io scheduler bfq registered
[ 0.755179] Monitor-Mwait will be used to enter C-1 state
[ 0.755191] Monitor-Mwait will be used to enter C-2 state
[ 0.755196] Monitor-Mwait will be used to enter C-3 state
[ 0.755201] ACPI: \_PR_.CPU0: Found 3 idle states
[ 0.755668] isapnp: Scanning for PnP cards...
[ 0.874228] random: fast init done
[ 1.455183] isapnp: No Plug & Play device found
[ 1.503503] Freeing initrd memory: 16308K
[ 1.503822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.504614] Linux agpgart interface v0.103
[ 1.508164] brd: module loaded
[ 1.508779] ahci 0000:00:1f.2: version 3.0
[ 1.509164] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.509171] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 1.517516] scsi host0: ahci
[ 1.517724] scsi host1: ahci
[ 1.517901] scsi host2: ahci
[ 1.517988] ata1: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304100 irq 24
[ 1.517994] ata2: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304180 irq 24
[ 1.517998] ata3: SATA max UDMA/133 abar m2048@0x98304000 port 0x98304200 irq 24
[ 1.518188] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.551681] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.551692] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.551890] mousedev: PS/2 mouse device common for all mice
[ 1.552828] rtc_cmos 00:01: RTC can wake from S4
[ 1.553161] rtc_cmos 00:01: registered as rtc0
[ 1.553210] rtc_cmos 00:01: setting system clock to 2021-12-31T15:01:49 UTC (1640962909)
[ 1.553245] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.553299] intel_pstate: CPU model not supported
[ 1.553312] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.553369] vesafb: mode is 1024x768x16, linelength=2048, pages=3
[ 1.553373] vesafb: scrolling: redraw
[ 1.553374] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.553403] vesafb: framebuffer at 0x80000000, mapped to 0x(ptrval), using 3072k, total 7616k
[ 1.553545] Console: switching to colour frame buffer device 128x48
[ 1.571610] fb0: VESA VGA frame buffer device
[ 1.571950] Key type dns_resolver registered
[ 1.572264] microcode: sig=0x10661, pf=0x80, revision=0x44
[ 1.572315] microcode: Microcode Update Driver: v2.2.
[ 1.572322] IPI shorthand broadcast: enabled
[ 1.572338] sched_clock: Marking stable (1571381334, 378009)->(1619876679, -48117336)
[ 1.572470] registered taskstats version 1
[ 1.572476] Loading compiled-in X.509 certificates
[ 1.572554] zswap: loaded using pool lzo/zbud
[ 1.572713] Key type ._fscrypt registered
[ 1.572717] Key type .fscrypt registered
[ 1.572719] Key type fscrypt-provisioning registered
[ 1.573322] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 1.578069] Key type encrypted registered
[ 1.578321] PM: Magic number: 1:919:33
[ 1.578519] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 1.582850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.709772] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec0c42d75, max_idle_ns: 440795212242 ns
[ 1.709790] clocksource: Switched to clocksource tsc
[ 1.843004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.843036] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.843073] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.843487] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.843552] ata1.00: ATA-8: TOSHIBA MK3276GSX -63, GS101X, max UDMA/100
[ 1.843593] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.844117] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.844228] ata1.00: configured for UDMA/100
[ 1.844377] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3276GS 1X PQ: 0 ANSI: 5
[ 1.844735] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.844753] sd 0:0:0:0: [sda] Write Protect is off
[ 1.844769] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.844799] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.943313] sda: sda1 sda2 < sda5 sda6 >
[ 1.943679] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.946912] Freeing unused kernel image (initmem) memory: 940K
[ 1.949853] Write protecting kernel text and read-only data: 14380k
[ 1.949856] NX-protecting the kernel data: 7188k
[ 1.950948] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.951033] x86/mm: Checking user space page tables
[ 1.951461] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.951472] Run /init as init process
[ 1.951475] with arguments:
[ 1.951477] /init
[ 1.951479] splash
[ 1.951481] noiswmd
[ 1.951483] with environment:
[ 1.951484] HOME=/
[ 1.951486] TERM=linux
[ 1.951487] BOOT_IMAGE=/boot/vmlinuz-5.15.11-desktop-3.mga8
[ 1.951489] vga=791
[ 2.053617] dracut: Mageia-8
[ 2.213765] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 2.213774] clocksource: 'hpet' wd_nsec: 21998870178 wd_now: 4f264e75 wd_last: 3c600924 mask: ffffffff
[ 2.213779] clocksource: 'tsc' cs_nsec: 495999108 cs_now: 8c313d973 cs_last: 88ff66be5 mask: ffffffffffffffff
[ 2.213783] clocksource: 'tsc' is current clocksource.
[ 2.213788] tsc: Marking TSC unstable due to clocksource watchdog
[ 2.213799] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 2.213801] sched_clock: Marking unstable (2213420345, 378009)<-(2261915832, -48117336)
[ 2.215372] clocksource: Not enough CPUs to check clocksource 'tsc'.
[ 2.215394] clocksource: Switched to clocksource hpet
[ 2.489959] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found
[ 2.856012] ACPI: battery: Slot [BAT0] (battery present)
[ 2.892595] pci 0000:00:00.0: Intel 965GM Chipset
[ 2.892623] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 2.892896] pci 0000:00:00.0: detected 8192K stolen memory
[ 2.893001] checking generic (80000000 770000) vs hw (94000000 100000)
[ 2.893006] checking generic (80000000 770000) vs hw (80000000 10000000)
[ 2.893009] fb0: switching to i915 from VESA VGA
[ 2.893680] Console: switching to colour dummy device 80x25
[ 2.894168] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.923967] i915 0000:00:02.0: [drm] Initialized overlay support.
[ 2.925912] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.926854] ACPI: video: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 3.150472] acpi device:3b: registered as cooling_device1
[ 3.152095] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2
[ 3.351059] fbcon: i915drmfb (fb0) is primary device
[ 3.861616] random: crng init done
[ 4.034317] Console: switching to colour frame buffer device 160x50
[ 4.056193] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 4.078081] dracut: Starting plymouth daemon
[ 6.385016] ata_piix 0000:00:1f.1: version 2.13
[ 6.430847] scsi host3: ata_piix
[ 6.443862] scsi host4: ata_piix
[ 6.443952] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50e0 irq 14
[ 6.443958] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50e8 irq 15
[ 6.611895] ata4.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
[ 6.618069] scsi 3:0:0:0: CD-ROM Optiarc CD-RW CRX880A KX07 PQ: 0 ANSI: 5
[ 6.723651] ACPI: bus type USB registered
[ 6.723705] usbcore: registered new interface driver usbfs
[ 6.723721] usbcore: registered new interface driver hub
[ 6.723742] usbcore: registered new device driver usb
[ 6.892508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.918567] ehci-pci: EHCI PCI platform driver
[ 6.933929] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 6.933953] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 6.933975] ehci-pci 0000:00:1a.7: debug port 1
[ 6.974345] ehci-pci 0000:00:1a.7: irq 18, io mem 0x98304c00
[ 6.984782] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.984887] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 6.984893] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.984897] usb usb1: Product: EHCI Host Controller
[ 6.984900] usb usb1: Manufacturer: Linux 5.15.11-desktop-3.mga8 ehci_hcd
[ 6.984903] usb usb1: SerialNumber: 0000:00:1a.7
[ 6.985159] hub 1-0:1.0: USB hub found
[ 6.985172] hub 1-0:1.0: 4 ports detected
[ 6.985742] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 6.985752] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 6.985872] ehci-pci 0000:00:1d.7: debug port 1
[ 7.034372] ehci-pci 0000:00:1d.7: irq 23, io mem 0x98304800
[ 7.040790] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.040938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 7.040943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.040947] usb usb2: Product: EHCI Host Controller
[ 7.040950] usb usb2: Manufacturer: Linux 5.15.11-desktop-3.mga8 ehci_hcd
[ 7.040952] usb usb2: SerialNumber: 0000:00:1d.7
[ 7.041184] hub 2-0:1.0: USB hub found
[ 7.041198] hub 2-0:1.0: 6 ports detected
[ 7.102690] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.117014] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.117039] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 7.117055] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 7.117086] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
[ 7.118817] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 7.118824] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.118827] usb usb3: Product: UHCI Host Controller
[ 7.118830] usb usb3: Manufacturer: Linux 5.15.11-desktop-3.mga8 uhci_hcd
[ 7.118832] usb usb3: SerialNumber: 0000:00:1a.0
[ 7.120526] hub 3-0:1.0: USB hub found
[ 7.120789] hub 3-0:1.0: 2 ports detected
[ 7.126374] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.126386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 7.126397] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 7.126440] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
[ 7.129856] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 7.129867] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.129871] usb usb4: Product: UHCI Host Controller
[ 7.129873] usb usb4: Manufacturer: Linux 5.15.11-desktop-3.mga8 uhci_hcd
[ 7.129876] usb usb4: SerialNumber: 0000:00:1a.1
[ 7.130401] hub 4-0:1.0: USB hub found
[ 7.130805] hub 4-0:1.0: 2 ports detected
[ 7.138164] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.138179] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 7.138190] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 7.138220] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
[ 7.148991] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 7.149002] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.149006] usb usb5: Product: UHCI Host Controller
[ 7.149008] usb usb5: Manufacturer: Linux 5.15.11-desktop-3.mga8 uhci_hcd
[ 7.149011] usb usb5: SerialNumber: 0000:00:1d.0
[ 7.149232] hub 5-0:1.0: USB hub found
[ 7.149823] hub 5-0:1.0: 2 ports detected
[ 7.154897] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.154912] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 7.154923] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 7.154972] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
[ 7.160841] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 7.160852] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.160855] usb usb6: Product: UHCI Host Controller
[ 7.160858] usb usb6: Manufacturer: Linux 5.15.11-desktop-3.mga8 uhci_hcd
[ 7.160861] usb usb6: SerialNumber: 0000:00:1d.1
[ 7.161144] hub 6-0:1.0: USB hub found
[ 7.161158] hub 6-0:1.0: 2 ports detected
[ 7.162132] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.162143] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 7.162155] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 7.162184] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[ 7.170736] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 7.170748] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.170752] usb usb7: Product: UHCI Host Controller
[ 7.170754] usb usb7: Manufacturer: Linux 5.15.11-desktop-3.mga8 uhci_hcd
[ 7.170778] usb usb7: SerialNumber: 0000:00:1d.2
[ 7.172435] hub 7-0:1.0: USB hub found
[ 7.172458] hub 7-0:1.0: 2 ports detected
[ 7.329334] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 7.329345] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.344580] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 7.491884] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 7.558855] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 7.643046] usb 6-1: New USB device found, idVendor=0451, idProduct=2046, bcdDevice= 1.25
[ 7.643056] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.646165] hub 6-1:1.0: USB hub found
[ 7.648034] hub 6-1:1.0: 4 ports detected
[ 7.748782] dracut: Checking ext4: /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359
[ 7.749110] dracut: issuing e2fsck -a /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359
[ 7.846038] dracut: /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359: clean, 175571/3301376 files, 2044564/13183084 blocks
[ 7.854441] dracut: Mounting /dev/disk/by-uuid/678ba0a3-c052-4f48-a7cb-75e98bf20359 with -o rw,noatime,ro
[ 7.925319] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 7.937827] usb 6-1.1: new full-speed USB device number 3 using uhci_hcd
[ 8.073051] usb 6-1.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 8.073060] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.073063] usb 6-1.1: Product: USB Receiver
[ 8.073066] usb 6-1.1: Manufacturer: Logitech
[ 8.128548] hid: raw HID events driver (C) Jiri Kosina
[ 8.160460] usbcore: registered new interface driver usbhid
[ 8.160468] usbhid: USB HID core driver
[ 8.167802] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 8.177711] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.0/0003:046D:C534.0001/input/input3
[ 8.229121] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.1/input0
[ 8.231773] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C534.0002/input/input4
[ 8.232266] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C534.0002/input/input5
[ 8.242184] dracut: Mounted root filesystem /dev/sda1
[ 8.284140] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C534.0002/input/input6
[ 8.285273] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.1/input1
[ 8.302728] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.1/input0
[ 8.316334] usb 2-5: New USB device found, idVendor=152e, idProduct=2507, bcdDevice= 0.00
[ 8.316345] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.316349] usb 2-5: Product: Super Multi Rewriter
[ 8.316352] usb 2-5: Manufacturer: HLDS Inc.
[ 8.316355] usb 2-5: SerialNumber: P01060721022000
[ 8.359848] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.1/input1
[ 8.415030] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[ 8.416861] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input9
[ 8.416984] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1d.1-1.1/input1:2
[ 8.512977] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 8.519264] scsi host5: usb-storage 2-5:1.0
[ 8.520442] usbcore: registered new interface driver usb-storage
[ 8.521145] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input13
[ 8.521255] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1d.1-1.1/input1:2
[ 8.550533] usbcore: registered new interface driver uas
[ 8.717581] dracut: Switching root
[ 9.619105] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-E10L LE05 PQ: 0 ANSI: 0
[ 9.627836] sr 5:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.633575] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 9.958006] systemd[1]: Inserted module 'autofs4'
[ 10.125460] NET: Registered PF_INET6 protocol family
[ 10.132251] Segment Routing with IPv6
[ 10.132264] In-situ OAM (IOAM) with IPv6
[ 10.389720] systemd[1]: systemd 246 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=unified)
[ 10.401987] systemd[1]: Detected architecture x86.
[ 10.523994] systemd[1]: Set hostname to <localhost.localdomain>.
[ 12.896640] systemd[1]: Queued start job for default target Graphical Interface.
[ 12.898270] systemd[1]: Created slice Slice /system/getty.
[ 12.898718] systemd[1]: Created slice Slice /system/modprobe.
[ 12.899125] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 12.899409] systemd[1]: Created slice User and Session Slice.
[ 12.899611] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.901085] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.901283] systemd[1]: Reached target Login Prompts.
[ 12.901456] systemd[1]: Reached target Remote File Systems.
[ 12.901515] systemd[1]: Reached target RPC Port Mapper.
[ 12.901582] systemd[1]: Reached target Slices.
[ 12.902940] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 12.913481] systemd[1]: Listening on Process Core Dump Socket.
[ 12.913693] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 12.941292] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 12.941690] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.942057] systemd[1]: Listening on Journal Socket.
[ 12.942443] systemd[1]: Listening on udev Control Socket.
[ 12.942724] systemd[1]: Listening on udev Kernel Socket.
[ 12.944377] systemd[1]: Mounting Huge Pages File System...
[ 12.946141] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.957612] systemd[1]: Mounting Kernel Debug File System...
[ 12.960097] systemd[1]: Mounting Kernel Trace File System...
[ 12.987271] systemd[1]: Starting Load legacy module configuration...
[ 12.993173] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 13.007255] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 13.019982] systemd[1]: Starting Software RAID Monitor Takeover...
[ 13.026159] systemd[1]: Starting Load Kernel Module configfs...
[ 13.039195] systemd[1]: Starting Load Kernel Module drm...
[ 13.049295] systemd[1]: Starting Load Kernel Module fuse...
[ 13.107200] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 13.108666] systemd[1]: Starting File System Check on Root Device...
[ 13.116129] systemd[1]: Starting Journal Service...
[ 13.141698] systemd[1]: Starting Load Kernel Modules...
[ 13.141942] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 13.147096] systemd[1]: Starting Coldplug All udev Devices...
[ 13.160734] systemd[1]: Starting Setup Virtual Console...
[ 13.191131] systemd[1]: Mounted Huge Pages File System.
[ 13.191468] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.191742] systemd[1]: Mounted Kernel Debug File System.
[ 13.202006] systemd[1]: Mounted Kernel Trace File System.
[ 13.206883] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 13.208436] fuse: init (API version 7.34)
[ 13.230883] systemd[1]: Started Software RAID Monitor Takeover.
[ 13.231558] systemd[1]: modprobe@configfs.service: Succeeded.
[ 13.233090] systemd[1]: Finished Load Kernel Module configfs.
[ 13.233671] systemd[1]: modprobe@drm.service: Succeeded.
[ 13.236051] systemd[1]: Finished Load Kernel Module drm.
[ 13.236712] systemd[1]: modprobe@fuse.service: Succeeded.
[ 13.238391] systemd[1]: Finished Load Kernel Module fuse.
[ 13.240160] systemd[1]: Finished Load Kernel Modules.
[ 13.251130] systemd[1]: Mounting FUSE Control File System...
[ 13.261941] systemd[1]: Mounting Kernel Configuration File System...
[ 13.288537] systemd[1]: Starting Apply Kernel Variables...
[ 13.310051] systemd[1]: Mounted FUSE Control File System.
[ 13.310386] systemd[1]: Mounted Kernel Configuration File System.
[ 13.556475] Non-volatile memory driver v1.3
[ 13.613564] systemd[1]: Finished File System Check on Root Device.
[ 13.615278] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.674692] systemd[1]: Finished Load legacy module configuration.
[ 13.733080] systemd[1]: Started Journal Service.
[ 13.753802] EXT4-fs (sda1): re-mounted. Opts: acl. Quota mode: none.
[ 18.389370] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0C:00/input/input14
[ 18.391113] ACPI: button: Power Button [PWRB]
[ 18.391868] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0D:00/input/input15
[ 18.391974] ACPI: button: Lid Switch [LID0]
[ 18.392051] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C0E:00/input/input16
[ 18.392145] ACPI: button: Sleep Button [SLPB]
[ 18.392240] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input17
[ 18.392342] ACPI: button: Power Button [PWRF]
[ 18.413856] thermal LNXTHERM:00: registered as thermal_zone0
[ 18.413867] ACPI: thermal: Thermal Zone [TZ01] (50 C)
[ 18.545342] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20210730/utaddress-204)
[ 18.545356] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 18.545361] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20210730/utaddress-204)
[ 18.545368] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 18.545370] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053A (\GPIO) (20210730/utaddress-204)
[ 18.545377] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 18.545378] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 18.583986] ACPI: AC: AC Adapter [AC] (on-line)
[ 18.772549] pps_core: LinuxPPS API ver. 1 registered
[ 18.772555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 18.807989] PTP clock support registered
[ 19.511740] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 19.528882] i2c i2c-6: 2/2 memory slots populated (from DMI)
[ 19.531938] i2c i2c-6: Successfully instantiated SPD at 0x50
[ 19.641646] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 19.663552] acer_wmi: Function bitmap for Communication Device: 0x1
[ 19.944262] tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:62:98:4d
[ 19.944274] tg3 0000:05:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[ 19.944279] tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 19.944283] tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 20.059526] intel_powerclamp: No package C-state available
[ 20.399974] Adding 4191344k swap on /dev/sda5. Priority:-2 extents:1 across:4191344k FS
[ 20.520443] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[ 20.520454] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.520459] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 20.520463] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 20.520465] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 20.520468] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 20.520471] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 20.664195] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.714425] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 20.714519] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 20.730068] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 21.362385] iTCO_vendor_support: vendor-support=0
[ 21.365168] iTCO_wdt iTCO_wdt.1.auto: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 21.373094] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=1)
[ 21.636446] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input18
[ 21.870858] tg3 0000:05:00.0 enp5s0: renamed from eth0
[ 22.422065] ath5k 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 22.422265] ath5k 0000:06:00.0: registered as 'phy0'
[ 22.935825] ath: EEPROM regdomain: 0x65
[ 22.935833] ath: EEPROM indicates we should expect a direct regpair map
[ 22.935836] ath: Country alpha2 being used: 00
[ 22.935838] ath: Regpair used: 0x65
[ 22.935875] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.939718] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 22.987060] ath5k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 23.195988] device-mapper: uevent: version 1.0.3
[ 23.198114] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 23.830856] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl. Quota mode: none.
[ 35.147553] NET: Registered PF_PACKET protocol family
[ 36.919965] wlp6s0: authenticate with d0:0f:6d:b0:bd:6f
[ 36.926487] wlp6s0: send auth to d0:0f:6d:b0:bd:6f (try 1/3)
[ 36.927975] wlp6s0: authenticated
[ 36.929004] wlp6s0: associate with d0:0f:6d:b0:bd:6f (try 1/3)
[ 36.931956] wlp6s0: RX AssocResp from d0:0f:6d:b0:bd:6f (capab=0x411 status=0 aid=2)
[ 36.932084] wlp6s0: associated
[ 37.048020] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[ 42.893678] netfilter PSD loaded - (c) astaro AG
[ 42.925490] IFWLOG: register target
[ 515.910157] logitech-hidpp-device 0003:046D:4054.0003: HID++ 4.5 device connected.
[germ@localhost ~]$ Posted: Dec 31st, '21, 21:35Posted: Jan 1st, '22, 04:36Germ wrote:[ 42.925490] IFWLOG: register target
[ 515.910157] logitech-hidpp-device 0003:046D:4054.0003: HID++ 4.5 device connected.
Posted: Jan 1st, '22, 16:42Posted: Jan 2nd, '22, 19:04[1.600068] AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0Posted: Jan 2nd, '22, 21:33Posted: Jan 2nd, '22, 22:37Germ wrote:Not sure why it was only 90 seconds. It was 4-5 minutes before
inxi -FxzdPosted: Jan 2nd, '22, 23:04Ok, but what happens after that - because this doesn't show what it waits for.
[ 1.582850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.709772] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x18ec0c42d75, max_idle_ns: 440795212242 ns
[ 1.709790] clocksource: Switched to clocksource tsc[ 2.213788] tsc: Marking TSC unstable due to clocksource watchdog
[ 2.213799] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
Posted: Jan 3rd, '22, 17:29Posted: Jan 6th, '22, 18:14