Mageia forum

I just did a fresh install of Mageia 2 KDE 64 bit....left Ubuntu....

I have all of my files on 2 different external harddrives and Mageia is giving me some trouble.

1) The first drive is recognized in "removable devices" in "System Settings" but will not mount. I've clicked the options for it to automount and saved it with no luck.

2) The second drive will automount as soon as I plug it in but I get an error message in Dolphin that it "could not enter folder /media/Documents (which is the drive name). It tells me how much free space I have though. This drive mounted on Windows 7 with ext2read.

Not sure what to do.....I always feel nervous when I only have 1 copy of my family pics, music, documents etc etc.

Any suggestions for a noob?

Shawn

<EDIT: I reread this and realized that I put the wrong information with the wrong HD>

I left Ubuntu for Mageia 1 a few months ago and this didn't happen...and then I went back to Ubuntu while Mageia 2 was being developed....both times there was not an issue.....not sure what changed....

After plugging in the drive enter the command dmesg in a terminal and post the entries at the end concerning your drive(s)

Then give the command

Code: Select all

tail -n 20 /var/log/syslog

and see if that has any additional information.
(you will need to be root user to read that log.)

It would be interesting to note what filesystem was used when those drives were formatted. Also, what happens if you boot from a live cd, like Knoppix, and plug in the drives? Do they automount there, same results, access? Another thing is to try harddrake and determine an appropriate mountpoint to mount the drive.

I will do as you ask when I get home later... for now....the drives were formatted etx4 in Ubuntu...don't remember if I did it in 11:10 or 12:04 if that matters.

I don't have a live CD of Mageia burned to boot from....I do have an old Ubuntu one....which I'll try...

Thanks guys

DMESG output

Code: Select all

[    0.163142] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.163144] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.163146] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xf7ffffff] (subtractive decode)
[    0.163149] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[    0.163151] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[    0.163176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.163370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.163408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.163452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.163491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.163565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.163712]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.163921]  pci0000:00: ACPI _OSC control (0x19) granted
[    0.169428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169481] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169537] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169592] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169635] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.169734] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.170017] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.170017] vgaarb: loaded
[    0.170017] vgaarb: bridge control possible 0000:01:05.0
[    0.170049] PCI: Using ACPI for IRQ routing
[    0.170329] PCI: pci_cache_line_size set to 64 bytes
[    0.170417] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.170420] reserve RAM buffer: 00000000ae4c7000 - 00000000afffffff
[    0.170423] reserve RAM buffer: 00000000afd3f000 - 00000000afffffff
[    0.170425] reserve RAM buffer: 00000000aff00000 - 00000000afffffff
[    0.170529] NetLabel: Initializing
[    0.170531] NetLabel:  domain hash size = 128
[    0.170532] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.170543] NetLabel:  unlabeled traffic allowed by default
[    0.170560] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.170564] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.172017] Switching to clocksource hpet
[    0.178268] pnp: PnP ACPI init
[    0.178287] ACPI: bus type pnp registered
[    0.178678] pnp 00:00: [bus 00-ff]
[    0.178681] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.178683] pnp 00:00: [io  0x0d00-0xffff window]
[    0.178686] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.178688] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.178690] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.178692] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.178694] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.178696] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.178698] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.178700] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.178702] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.178704] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.178706] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.178708] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.178710] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.178712] pnp 00:00: [mem 0xc0000000-0xf7ffffff window]
[    0.178714] pnp 00:00: [mem 0xfc000000-0xfed3ffff window]
[    0.178716] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[    0.178718] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.178781] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.178952] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.178955] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.178957] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    0.178958] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[    0.179026] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.179029] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.179032] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.179035] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.179038] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.179145] pnp 00:02: [io  0x0000-0x000f]
[    0.179147] pnp 00:02: [io  0x0081-0x008f]
[    0.179149] pnp 00:02: [io  0x00c0-0x00df]
[    0.179152] pnp 00:02: [dma 4]
[    0.179177] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.179184] pnp 00:03: [io  0x00f0-0x00fe]
[    0.179198] pnp 00:03: [irq 13]
[    0.179224] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.179255] pnp 00:04: [io  0x0070-0x0071]
[    0.179280] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.179286] pnp 00:05: [io  0x0061]
[    0.179312] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.179323] pnp 00:06: [io  0x0010-0x001f]
[    0.179325] pnp 00:06: [io  0x002e-0x002f]
[    0.179327] pnp 00:06: [io  0x0072-0x0073]
[    0.179329] pnp 00:06: [io  0x0080]
[    0.179330] pnp 00:06: [io  0x00b0-0x00b1]
[    0.179332] pnp 00:06: [io  0x0092]
[    0.179334] pnp 00:06: [io  0x0400-0x04cf]
[    0.179336] pnp 00:06: [io  0x04d0-0x04d1]
[    0.179337] pnp 00:06: [io  0x04d6]
[    0.179339] pnp 00:06: [io  0x0680-0x06ff]
[    0.179341] pnp 00:06: [io  0x077a]
[    0.179342] pnp 00:06: [io  0x0c00-0x0c01]
[    0.179344] pnp 00:06: [io  0x0c14]
[    0.179346] pnp 00:06: [io  0x0c50-0x0c52]
[    0.179347] pnp 00:06: [io  0x0c6c]
[    0.179349] pnp 00:06: [io  0x0c6f]
[    0.179351] pnp 00:06: [io  0x0cd0-0x0cdb]
[    0.179352] pnp 00:06: [io  0x0500-0x0501]
[    0.179354] pnp 00:06: [io  0x0550]
[    0.179409] system 00:06: [io  0x0400-0x04cf] has been reserved
[    0.179411] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.179414] system 00:06: [io  0x04d6] has been reserved
[    0.179416] system 00:06: [io  0x0680-0x06ff] has been reserved
[    0.179418] system 00:06: [io  0x077a] has been reserved
[    0.179421] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.179423] system 00:06: [io  0x0c14] has been reserved
[    0.179427] system 00:06: [io  0x0c50-0x0c52] has been reserved
[    0.179430] system 00:06: [io  0x0c6c] has been reserved
[    0.179432] system 00:06: [io  0x0c6f] has been reserved
[    0.179434] system 00:06: [io  0x0cd0-0x0cdb] has been reserved
[    0.179437] system 00:06: [io  0x0500-0x0501] has been reserved
[    0.179439] system 00:06: [io  0x0550] has been reserved
[    0.179442] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.179477] pnp 00:07: [mem 0x000e0000-0x000fffff]
[    0.179479] pnp 00:07: [mem 0xffe00000-0xffffffff]
[    0.179481] pnp 00:07: [mem 0xfed80000-0xfed80fff]
[    0.179528] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.179531] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[    0.179534] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.179537] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.179549] pnp 00:08: [io  0x0060]
[    0.179551] pnp 00:08: [io  0x0064]
[    0.179559] pnp 00:08: [irq 1]
[    0.179585] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.179600] pnp 00:09: [irq 12]
[    0.179626] pnp 00:09: Plug and Play ACPI device, IDs SYN1e49 SYN1e00 SYN0002 PNP0f13 (active)
[    0.180126] pnp: PnP ACPI: found 10 devices
[    0.180130] ACPI: ACPI bus type pnp unregistered
[    0.187360] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.187366] PCI: max bus depth: 1 pci_try_num: 2
[    0.187398] pci 0000:00:06.0: BAR 15: assigned [mem 0xd0600000-0xd06fffff pref]
[    0.187402] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.187404] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.187408] pci 0000:00:01.0:   bridge window [mem 0xd0300000-0xd04fffff]
[    0.187411] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.187415] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[    0.187417] pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
[    0.187421] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.187425] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[    0.187428] pci 0000:00:05.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.187434] pci 0000:04:00.0: BAR 6: assigned [mem 0xd0600000-0xd060ffff pref]
[    0.187436] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[    0.187439] pci 0000:00:06.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.187442] pci 0000:00:06.0:   bridge window [mem 0xd0600000-0xd06fffff pref]
[    0.187446] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[    0.187465] pci 0000:00:01.0: setting latency timer to 64
[    0.187496] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.187498] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.187501] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187503] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.187505] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.187507] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.187509] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.187512] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.187514] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.187516] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.187518] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.187520] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.187523] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.187525] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.187527] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf7ffffff]
[    0.187529] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[    0.187531] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    0.187534] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.187536] pci_bus 0000:01: resource 1 [mem 0xd0300000-0xd04fffff]
[    0.187538] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.187541] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.187543] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.187546] pci_bus 0000:03: resource 1 [mem 0xd0200000-0xd02fffff]
[    0.187548] pci_bus 0000:04: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.187550] pci_bus 0000:04: resource 2 [mem 0xd0600000-0xd06fffff pref]
[    0.187553] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.187555] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.187557] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.187559] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.187561] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.187563] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.187566] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.187568] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.187570] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.187572] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff]
[    0.187574] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.187576] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.187579] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.187581] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff]
[    0.187583] pci_bus 0000:05: resource 18 [mem 0xc0000000-0xf7ffffff]
[    0.187585] pci_bus 0000:05: resource 19 [mem 0xfc000000-0xfed3ffff]
[    0.187587] pci_bus 0000:05: resource 20 [mem 0xfed45000-0xffffffff]
[    0.187624] NET: Registered protocol family 2
[    0.187772] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.188988] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.192068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.192442] TCP: Hash tables configured (established 524288 bind 65536)
[    0.192444] TCP reno registered
[    0.192458] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.192495] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.192599] NET: Registered protocol family 1
[    0.192610] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.473130] pci 0000:01:05.0: Boot video device
[    0.473143] PCI: CLS 64 bytes, default 64
[    0.473203] Trying to unpack rootfs image as initramfs...
[    0.572129] Freeing initrd memory: 6612k freed
[    0.576376] Simple Boot Flag at 0x44 set to 0x1
[    0.576647] IBS: LVT offset 1 assigned
[    0.576662] perf: AMD IBS detected (0x0000001f)
[    0.576847] audit: initializing netlink socket (disabled)
[    0.576861] type=2000 audit(1340214099.575:1): initialized
[    0.594247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.596383] VFS: Disk quotas dquot_6.5.2
[    0.596439] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.596584] msgmni has been set to 5507
[    0.596887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.596949] io scheduler noop registered
[    0.596954] io scheduler deadline registered
[    0.597063] io scheduler cfq registered (default)
[    0.597302] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    0.597459] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    0.597586] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[    0.597752] vesafb: mode is 800x600x16, linelength=1600, pages=16
[    0.597755] vesafb: scrolling: redraw
[    0.597758] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.597981] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002100000, using 1875k, total 16384k
[    0.636441] Console: switching to colour frame buffer device 100x37
[    0.674488] fb0: VESA VGA frame buffer device
[    0.674526] GHES: HEST is not enabled!
[    0.674647] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.675073] Linux agpgart interface v0.103
[    0.676822] brd: module loaded
[    0.676956] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.680623] i8042: Detected active multiplexing controller, rev 1.1
[    0.682988] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.682995] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.683029] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.683048] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.683064] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.683256] mousedev: PS/2 mouse device common for all mice
[    0.683394] rtc_cmos 00:04: RTC can wake from S4
[    0.683539] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.683567] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.683577] cpuidle: using governor ladder
[    0.683579] cpuidle: using governor menu
[    0.683772] TCP cubic registered
[    0.683774] Registering the dns_resolver key type
[    0.683951] PM: Checking hibernation image partition UUID=205f63e5-c778-41da-95e5-e66c035d34fb
[    0.721174] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.578063] Refined TSC clocksource calibration: 2194.504 MHz.
[    1.578074] Switching to clocksource tsc
[    1.601135] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    1.634072] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[    1.636661] PM: Hibernation image not present or could not be loaded.
[    1.636686] registered taskstats version 1
[    1.637137]   Magic number: 0:439:694
[    1.637228] rtc_cmos 00:04: setting system clock to 2012-06-20 17:41:40 UTC (1340214100)
[    1.637231] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    1.638636] Freeing unused kernel memory: 744k freed
[    1.638871] Write protecting the kernel read-only data: 10240k
[    1.644664] Freeing unused kernel memory: 1660k freed
[    1.652245] Freeing unused kernel memory: 1996k freed
[    1.693441] SCSI subsystem initialized
[    1.705800] libata version 3.00 loaded.
[    1.706634] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    1.706882] scsi0 : pata_atiixp
[    1.706976] scsi1 : pata_atiixp
[    1.707534] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[    1.707537] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[    1.886098] ahci 0000:00:11.0: version 3.0
[    1.886245] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.886250] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[    1.886777] scsi2 : ahci
[    1.886863] scsi3 : ahci
[    1.886915] scsi4 : ahci
[    1.886962] scsi5 : ahci
[    1.887013] ata3: SATA max UDMA/133 abar m1024@0xd050b000 port 0xd050b100 irq 19
[    1.887017] ata4: SATA max UDMA/133 abar m1024@0xd050b000 port 0xd050b180 irq 19
[    1.887020] ata5: SATA max UDMA/133 abar m1024@0xd050b000 port 0xd050b200 irq 19
[    1.887024] ata6: SATA max UDMA/133 abar m1024@0xd050b000 port 0xd050b280 irq 19
[    2.192120] ata5: SATA link down (SStatus 0 SControl 300)
[    2.192196] ata6: SATA link down (SStatus 0 SControl 300)
[    2.347117] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.347150] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.349425] ata4.00: ATAPI: hp       CDDVDW TS-L633R, 0300, max UDMA/100
[    2.354125] ata4.00: configured for UDMA/100
[    2.404681] ata3.00: ATA-8: WDC WD7500BPKT-00PK4T0, 01.01A01, max UDMA/133
[    2.404685] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.407536] ata3.00: configured for UDMA/133
[    2.407783] scsi 2:0:0:0: Direct-Access     ATA      WDC WD7500BPKT-0 01.0 PQ: 0 ANSI: 5
[    2.410085] scsi 3:0:0:0: CD-ROM            hp       CDDVDW TS-L633R  0300 PQ: 0 ANSI: 5
[    2.419658] dracut: dracut-017-16.mga2
[    2.476912] udevd[139]: starting version 181
[    2.556500] dracut: Starting plymouth daemon
[    3.605379] usbcore: registered new interface driver usbfs
[    3.605404] usbcore: registered new interface driver hub
[    3.614248] sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    3.614253] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    3.614291] sd 2:0:0:0: [sda] Write Protect is off
[    3.614293] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.614309] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.614936] usbcore: registered new device driver usb
[    3.617658] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[    3.617694] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.617698] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.617854] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.618904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.618914] Initializing Realtek PCIE storage driver...
[    3.622279] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    3.622285] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    3.622326] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[    3.622339] QUIRK: Enable AMD PLL fix
[    3.622372] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd050a000
[    3.624023] Resource length: 0x1000
[    3.624031] Original address: 0xd0100000, remapped address: 0xffffc90000678000
[    3.624035] pci->irq = 18
[    3.624037] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[    3.627206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.627210] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    3.677138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.677142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.677145] usb usb1: Product: OHCI Host Controller
[    3.677147] usb usb1: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    3.677149] usb usb1: SerialNumber: 0000:00:12.0
[    3.677312] hub 1-0:1.0: USB hub found
[    3.677322] hub 1-0:1.0: 5 ports detected
[    3.677492] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    3.677495] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    3.677514] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    3.677534] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0508000
[    3.685970]  sda: sda1 sda2 < sda5 sda6 >
[    3.686423] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.732132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.732136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.732139] usb usb2: Product: OHCI Host Controller
[    3.732141] usb usb2: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    3.732143] usb usb2: SerialNumber: 0000:00:13.0
[    3.732309] hub 2-0:1.0: USB hub found
[    3.732320] hub 2-0:1.0: 5 ports detected
[    3.732496] ohci_hcd 0000:00:14.5: setting latency timer to 64
[    3.732499] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    3.732509] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 3
[    3.732529] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd0506000
[    3.787093] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.787097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.787099] usb usb3: Product: OHCI Host Controller
[    3.787101] usb usb3: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    3.787103] usb usb3: SerialNumber: 0000:00:14.5
[    3.787261] hub 3-0:1.0: USB hub found
[    3.787271] hub 3-0:1.0: 2 ports detected
[    3.787430] ohci_hcd 0000:00:16.0: setting latency timer to 64
[    3.787434] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    3.787442] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 4
[    3.787467] ohci_hcd 0000:00:16.0: irq 18, io mem 0xd0505000
[    3.825262] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[    3.825363] rts_pstor: waiting for device to settle before scanning
[    3.842134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.842138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.842140] usb usb4: Product: OHCI Host Controller
[    3.842142] usb usb4: Manufacturer: Linux 3.3.6-desktop-2.mga2 ohci_hcd
[    3.842144] usb usb4: SerialNumber: 0000:00:16.0
[    3.842311] hub 4-0:1.0: USB hub found
[    3.842322] hub 4-0:1.0: 4 ports detected
[    3.842911] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    3.842915] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    3.842927] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[    3.842936] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.842960] ehci_hcd 0000:00:12.2: debug port 1
[    3.842987] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0509000
[    3.848096] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.848127] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.848130] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.848132] usb usb5: Product: EHCI Host Controller
[    3.848134] usb usb5: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    3.848136] usb usb5: SerialNumber: 0000:00:12.2
[    3.848295] hub 5-0:1.0: USB hub found
[    3.848300] hub 5-0:1.0: 5 ports detected
[    3.848463] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    3.848466] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    3.848476] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[    3.848484] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.848507] ehci_hcd 0000:00:13.2: debug port 1
[    3.848521] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0507000
[    3.854096] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.854126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    3.854129] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.854131] usb usb6: Product: EHCI Host Controller
[    3.854133] usb usb6: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    3.854135] usb usb6: SerialNumber: 0000:00:13.2
[    3.854274] hub 6-0:1.0: USB hub found
[    3.854278] hub 6-0:1.0: 5 ports detected
[    3.854445] ehci_hcd 0000:00:16.2: setting latency timer to 64
[    3.854449] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    3.854457] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 7
[    3.854465] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.854488] ehci_hcd 0000:00:16.2: debug port 1
[    3.854502] ehci_hcd 0000:00:16.2: irq 17, io mem 0xd0504000
[    3.860106] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    3.860136] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    3.860138] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.860141] usb usb7: Product: EHCI Host Controller
[    3.860143] usb usb7: Manufacturer: Linux 3.3.6-desktop-2.mga2 ehci_hcd
[    3.860145] usb usb7: SerialNumber: 0000:00:16.2
[    3.860297] hub 7-0:1.0: USB hub found
[    3.860303] hub 7-0:1.0: 4 ports detected
[    3.966840] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    3.966846] PM: Marking nosave pages: 00000000ae4c7000 - 00000000ae6c7000
[    3.966856] PM: Marking nosave pages: 00000000afd3f000 - 00000000afef6000
[    3.966865] PM: Basic memory bitmaps created
[    3.978198] PM: Basic memory bitmaps freed
[    3.981840] PM: Starting manual resume from disk
[    3.981844] PM: Hibernation image partition 8:5 present
[    3.981846] PM: Looking for hibernation image.
[    3.982337] PM: Image not found (code -22)
[    3.982340] PM: Hibernation image not present or could not be loaded.
[    4.032629] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.090783] dracut: Checking ext4: /dev/disk/by-uuid/74a7f380-8046-4d0e-a5b1-b5bf40e96e23
[    4.090836] dracut: issuing e2fsck -a  /dev/disk/by-uuid/74a7f380-8046-4d0e-a5b1-b5bf40e96e23
[    4.143381] dracut: /dev/disk/by-uuid/74a7f380-8046-4d0e-a5b1-b5bf40e96e23: clean, 127284/788416 files, 1134522/3148484 blocks
[    4.143649] dracut: Remounting /dev/disk/by-uuid/74a7f380-8046-4d0e-a5b1-b5bf40e96e23 with -o acl,noatime,ro
[    4.156101] usb 6-2: new high-speed USB device number 2 using ehci_hcd
[    4.162087] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[    4.205334] dracut: Mounted root filesystem /dev/sda1
[    4.317213] dracut: Switching root
[    4.318239] usb 6-2: New USB device found, idVendor=0461, idProduct=4dd8
[    4.318243] usb 6-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    4.318245] usb 6-2: Product: HP Webcam-101
[    4.318247] usb 6-2: Manufacturer: HP Webcam-101
[    4.318249] usb 6-2: SerialNumber: HP Webcam-101
[    4.318795] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    4.768539] NET: Registered protocol family 10
[    4.825251] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    4.825451] Bad LUN (0:1)
[    4.825524] Bad target number (1:0)
[    4.825544] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.825591] Bad target number (2:0)
[    4.825667] Bad target number (3:0)
[    4.825757] Bad target number (4:0)
[    4.825819] Bad target number (5:0)
[    4.825865] Bad target number (6:0)
[    4.825911] Bad target number (7:0)
[    4.825930] rts_pstor: device scan complete
[    5.411475] udevd[337]: starting version 181
[    5.989837] EXT4-fs (sda1): re-mounted. Opts: acl
[    6.606937] Non-volatile memory driver v1.3
[    6.811442] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    6.811449] ACPI: Power Button [PWRB]
[    6.811512] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    6.817409] ACPI: Fan [FAN] (on)
[    6.817429] ACPI: Lid Switch [LID]
[    6.817507] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.817513] ACPI: Power Button [PWRF]
[    6.828273] thermal LNXTHERM:00: registered as thermal_zone0
[    6.828277] ACPI: Thermal Zone [TZ0] (35 C)
[    6.829443] thermal LNXTHERM:01: registered as thermal_zone1
[    6.829446] ACPI: Thermal Zone [TZ1] (0 C)
[    6.839721] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    6.846302] acpi device:02: registered as cooling_device1
[    6.846317] ACPI Warning: For \_SB_.PCI0.AGP_.VGA_._DOS: Parameter count mismatch - ASL declared 3, ACPI requires 1 (20120111/nspredef-359)
[    6.846366] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[    6.846373] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.932276] ACPI: processor limited to max C-state 1
[    7.079430] ACPI: AC Adapter [AC] (off-line)
[    7.153176] EDAC MC: Ver: 2.1.0
[    7.189058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.541225] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    7.541332] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[    7.553187] Linux media interface: v0.10
[    7.644715] Adding 4087272k swap on /dev/sda5.  Priority:0 extents:1 across:4087272k
[    9.092079] ACPI: Battery Slot [BAT0] (battery present)
[    9.092392] wmi: Mapper loaded
[    9.095384] powernow-k8: Found 1 AMD Athlon(tm) II P340 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[    9.095425] powernow-k8:    0 : pstate 0 (2200 MHz)
[    9.095427] powernow-k8:    1 : pstate 1 (1600 MHz)
[    9.095429] powernow-k8:    2 : pstate 2 (800 MHz)
[    9.108083] AMD64 EDAC driver v3.4.0
[    9.115942] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.119028] EDAC amd64: DRAM ECC disabled.
[    9.119040] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    9.119042]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    9.119043]  (Note that use of the override may cause unknown side effects.)
[    9.123075] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBI 1 (20120111/utaddress-251)
[    9.123085] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.123324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    9.123420] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    9.123837] r8169 0000:02:00.0: eth0: RTL8105e at 0xffffc9000066c000, 64:31:50:8e:3d:da, XID 00a00000 IRQ 43
[    9.133740] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120111/dsopcode-236)
[    9.133749] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff8800aee3dbe0), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.133760] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff8800aee3dde8), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.133799] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120111/dsopcode-236)
[    9.133804] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff8800aee3dbe0), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.133811] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff8800aee3dde8), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.134760] input: HP WMI hotkeys as /devices/virtual/input/input6
[    9.135614] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120111/dsopcode-236)
[    9.135622] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff8800aee3dbe0), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.135633] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff8800aee3dde8), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.135668] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120111/dsopcode-236)
[    9.135673] ACPI Error: Method parse/execution failed [\_SB_.WMID.WHCM] (Node ffff8800aee3dbe0), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.135680] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff8800aee3dde8), AE_AML_BUFFER_LIMIT (20120111/psparse-536)
[    9.142784] Linux video capture interface: v2.00
[    9.146499] cfg80211: Calling CRDA to update world regulatory domain
[    9.178633] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0461:4dd8)
[    9.186358] hda-intel: Using LPIB position fix
[    9.186406] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[    9.191985] input: HP Webcam-101 as /devices/pci0000:00/0000:00:13.2/usb6/6-2/6-2:1.0/input/input7
[    9.192177] usbcore: registered new interface driver uvcvideo
[    9.192179] USB Video Class driver (1.1.1)
[    9.198613] hda-intel: Enable sync_write for stable communication
[    9.212228] mute LED gpio 1 polarity 1
[    9.212235] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    9.212238]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.212240]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    9.212241]    mono: mono_out=0x0
[    9.212242]    inputs: Mic=0xc
[    9.212528] stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
[    9.222287] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    9.222363] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    9.226080] hda-intel: Using LPIB position fix
[    9.226117] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[    9.276720] ath: EEPROM regdomain: 0x60
[    9.276723] ath: EEPROM indicates we should expect a direct regpair map
[    9.276726] ath: Country alpha2 being used: 00
[    9.276728] ath: Regpair used: 0x60
[    9.278533] hda-intel: Enable sync_write for stable communication
[    9.282189] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    9.282744] Registered led device: ath9k-phy0
[    9.282753] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900020a0000, irq=17
[    9.302689] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    9.401001] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    9.401015] Disabling lock debugging due to kernel taint
[    9.409367] [fglrx] Maximum main memory to use for locked dma buffers: 2617 MBytes.
[    9.409461] [fglrx]   vendor: 1002 device: 9712 count: 1
[    9.410161] [fglrx] ioport: bar 1, base 0x3000, size: 0x100
[    9.410177] pci 0000:01:05.0: setting latency timer to 64
[    9.410652] [fglrx] Kernel PAT support is enabled
[    9.410675] [fglrx] module loaded - fglrx 8.96.4 [Apr  5 2012] with 1 minors
[    9.970194] cfg80211: World regulatory domain updated:
[    9.970198] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.970201] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.970204] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.970206] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.970208] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.970211] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.970223] cfg80211: Calling CRDA for country: US
[    9.972488] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[    9.973328] cfg80211: Regulatory domain changed to country: US
[    9.973332] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.973335] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    9.973337] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    9.973339] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.973342] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.973344] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.973346] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   14.908091] ata3.00: configured for UDMA/133
[   14.908105] ata3: EH complete
[   14.924397] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   15.037063] r8169 0000:02:00.0: eth0: link down
[   15.038284] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.053602] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.411164] [fglrx] ATIF platform detected with notification ID: 0x81
[   15.643438] [fglrx] GART Table is not in FRAME_BUFFER range
[   15.643742] [fglrx] Could not enable MSI; System prevented initialization
[   15.644594] [fglrx] Firegl kernel thread PID: 1326
[   15.644870] [fglrx] Firegl kernel thread PID: 1327
[   15.645292] [fglrx] Firegl kernel thread PID: 1328
[   15.645579] [fglrx] IRQ 18 Enabled
[   16.188166] [fglrx] Gart USWC size:864 M.
[   16.188170] [fglrx] Gart cacheable size:340 M.
[   16.188174] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   16.188177] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[   16.232909] EXT4-fs (sda1): re-mounted. Opts: acl,commit=600
[   16.342550] EXT4-fs (sda6): re-mounted. Opts: acl,commit=600
[   19.511423] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.796257] Netfilter messages via NETLINK v0.30.
[   19.824286] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   20.044389] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.045417] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   20.045421] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   20.092657] ctnetlink v0.93: registering with nfnetlink.
[   20.240964] ip_set: protocol 6
[   20.259549] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   20.952721] xt_time: kernel timezone is -0000
[   21.137883] Bridge firewalling registered
[   21.346335] u32 classifier
[   21.346343]     Actions configured
[   21.465402] netfilter PSD loaded - (c) astaro AG
[   21.470772] IFWLOG: register target
[   78.655840] ata3: hard resetting link
[   79.115211] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   79.123147] ata3.00: configured for UDMA/133
[   79.123328] ata3: EH complete
[   79.123591] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   79.261951] EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
[   79.268677] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
[  132.968186] usb 5-1: new high-speed USB device number 2 using ehci_hcd
[  133.087028] usb 5-1: New USB device found, idVendor=04fc, idProduct=0c25
[  133.087037] usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[  133.087045] usb 5-1: Product: USB to Serial-ATA bridge
[  133.087051] usb 5-1: Manufacturer: Sunplus Technology Co.,Ltd.
[  133.087056] usb 5-1: SerialNumber: FF9320421A0000000000005FF0418F
[  133.172393] usbcore: registered new interface driver uas
[  133.178958] Initializing USB Mass Storage driver...
[  133.179152] scsi7 : usb-storage 5-1:1.0
[  133.179225] usbcore: registered new interface driver usb-storage
[  133.179227] USB Mass Storage support registered.
[  134.184366] scsi 7:0:0:0: Direct-Access     ST932042 1AS                   PQ: 0 ANSI: 2
[  134.186557] sd 7:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  134.189066] sd 7:0:0:0: [sdc] Write Protect is off
[  134.189076] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00
[  134.191608] sd 7:0:0:0: [sdc] No Caching mode page present
[  134.191619] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  134.198615] sd 7:0:0:0: [sdc] No Caching mode page present
[  134.198624] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  134.269039]  sdc: sdc1
[  134.275843] sd 7:0:0:0: [sdc] No Caching mode page present
[  134.275853] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  134.275860] sd 7:0:0:0: [sdc] Attached SCSI disk
[  141.142215] usb 5-2: new high-speed USB device number 3 using ehci_hcd
[  141.258376] usb 5-2: New USB device found, idVendor=1058, idProduct=0704
[  141.258385] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  141.258392] usb 5-2: Product: External HDD   
[  141.258397] usb 5-2: Manufacturer: Western Digital
[  141.258403] usb 5-2: SerialNumber: 5758455830384C3239333135
[  141.259881] usb-storage 5-2:1.0: Quirks match for vid 1058 pid 0704: 8000
[  141.259936] scsi8 : usb-storage 5-2:1.0
[  142.263071] scsi 8:0:0:0: Direct-Access     WD       3200BMV External 1.05 PQ: 0 ANSI: 4
[  142.264776] sd 8:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  142.265749] sd 8:0:0:0: [sdd] Write Protect is off
[  142.265757] sd 8:0:0:0: [sdd] Mode Sense: 21 00 00 00
[  142.266725] sd 8:0:0:0: [sdd] No Caching mode page present
[  142.266734] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[  142.270506] sd 8:0:0:0: [sdd] No Caching mode page present
[  142.270514] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[  142.319431]  sdd: sdd1
[  142.323372] sd 8:0:0:0: [sdd] No Caching mode page present
[  142.323382] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[  142.323389] sd 8:0:0:0: [sdd] Attached SCSI disk
[  152.958824] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[  265.520814] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  265.564721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  265.663432] NET: Registered protocol family 17
[  266.647561] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  266.649581] wlan0: authenticated
[  266.649623] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  266.652600] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  266.652604] wlan0: associated
[  266.652607] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  266.652610] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  266.652612] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  266.653206] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  268.984937] netlink: 33 bytes leftover after parsing attributes.
[  268.984949] netlink: 33 bytes leftover after parsing attributes.
[  268.985105] netlink: 33 bytes leftover after parsing attributes.
[  269.302460] netlink: 33 bytes leftover after parsing attributes.
[  269.302473] netlink: 33 bytes leftover after parsing attributes.
[  269.302536] netlink: 33 bytes leftover after parsing attributes.
[  324.362823] wlan0: deauthenticating from 00:02:6f:98:0e:04 by local choice (reason=3)
[  324.369088] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  324.369092] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  324.369095] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  324.375171] cfg80211: Calling CRDA to update world regulatory domain
[  324.380378] cfg80211: World regulatory domain updated:
[  324.380385] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  324.380394] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  324.380401] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  324.380407] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  324.380413] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  324.380419] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  324.380450] cfg80211: Calling CRDA for country: US
[  324.388120] cfg80211: Regulatory domain changed to country: US
[  324.388128] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  324.388136] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  324.388144] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  324.388150] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  324.388156] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  324.388162] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  324.388168] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  350.275907] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  350.314579] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  350.405806] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  350.407787] wlan0: authenticated
[  350.407835] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  350.410395] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  350.410405] wlan0: associated
[  350.410414] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  350.410420] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  350.410426] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  350.411993] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  361.162164] wlan0: no IPv6 routers present
[  386.815841] wlan0: deauthenticating from 00:02:6f:98:0e:04 by local choice (reason=3)
[  386.815954] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  386.815998] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  386.816061] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  386.821250] cfg80211: Calling CRDA to update world regulatory domain
[  386.823595] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  386.825669] wlan0: authenticated
[  386.825736] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  386.825984] cfg80211: World regulatory domain updated:
[  386.825992] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  386.826000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  386.826034] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  386.826041] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  386.826047] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  386.826053] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  386.826078] cfg80211: Calling CRDA for country: US
[  386.828194] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  386.828205] wlan0: associated
[  386.828214] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  386.828219] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  386.828225] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  386.832866] cfg80211: Regulatory domain changed to country: US
[  386.832874] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  386.832882] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  386.832889] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  386.832895] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  386.832901] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  386.832907] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  386.832913] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  392.181646] wlan0: deauthenticating from 00:02:6f:98:0e:04 by local choice (reason=3)
[  392.181707] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  392.181713] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  392.181719] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  392.185152] cfg80211: Calling CRDA to update world regulatory domain
[  392.192955] cfg80211: World regulatory domain updated:
[  392.192959] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  392.192962] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  392.192965] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  392.192967] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  392.192970] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  392.192972] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  392.192991] cfg80211: Calling CRDA for country: US
[  392.195728] cfg80211: Regulatory domain changed to country: US
[  392.195731] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  392.195734] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  392.195737] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  392.195739] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  392.195741] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  392.195743] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  392.195745] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  392.393621] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  392.437951] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  392.527967] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  392.530024] wlan0: authenticated
[  392.530114] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  392.532564] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  392.532574] wlan0: associated
[  392.532582] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  392.532587] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  392.532593] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  392.533993] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  434.588657] wlan0: deauthenticating from 00:02:6f:98:0e:04 by local choice (reason=3)
[  434.588737] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  434.588744] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  434.588749] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  434.597211] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  434.599284] wlan0: authenticated
[  434.599391] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  434.602221] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  434.602229] wlan0: associated
[  434.602238] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  434.602243] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  434.602249] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  438.753558] wlan0: deauthenticating from 00:02:6f:98:0e:04 by local choice (reason=3)
[  438.761101] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  438.761106] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  438.761109] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  438.766140] cfg80211: Calling CRDA to update world regulatory domain
[  438.773518] cfg80211: World regulatory domain updated:
[  438.773526] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  438.773534] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  438.773541] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  438.773547] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  438.773553] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  438.773559] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  438.773587] cfg80211: Calling CRDA for country: US
[  438.778803] cfg80211: Regulatory domain changed to country: US
[  438.778810] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  438.778818] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  438.778825] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  438.778831] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  438.778837] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  438.778843] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  438.778849] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  439.193085] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  439.235894] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  439.330742] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  439.332779] wlan0: authenticated
[  439.332883] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  439.335707] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  439.335717] wlan0: associated
[  439.335725] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  439.335731] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  439.335736] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  439.337154] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  440.811511] wlan0: deauthenticating from 00:02:6f:98:0e:04 by local choice (reason=3)
[  440.811567] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  440.811574] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  440.811579] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  440.818338] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  440.820589] wlan0: authenticated
[  440.820696] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  440.823612] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  440.823623] wlan0: associated
[  440.823631] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  440.823637] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  440.823642] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[  442.591231] netlink: 33 bytes leftover after parsing attributes.
[  442.591242] netlink: 33 bytes leftover after parsing attributes.
[  442.591308] netlink: 33 bytes leftover after parsing attributes.
[  442.844507] netlink: 33 bytes leftover after parsing attributes.
[  442.844513] netlink: 33 bytes leftover after parsing attributes.
[  442.844544] netlink: 33 bytes leftover after parsing attributes.
[  450.338150] wlan0: no IPv6 routers present
[  472.210221] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  472.210230] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  472.210236] wlan0: moving STA 00:02:6f:98:0e:04 to state 0
[  472.226189] cfg80211: Calling CRDA to update world regulatory domain
[  472.231223] cfg80211: World regulatory domain updated:
[  472.231231] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  472.231240] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  472.231247] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  472.231253] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  472.231260] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  472.231266] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  472.231299] cfg80211: Calling CRDA for country: US
[  472.236941] cfg80211: Regulatory domain changed to country: US
[  472.236949] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  472.236958] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[  472.236965] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[  472.236971] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  472.236977] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  472.236983] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  472.236989] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[  473.676792] wlan0: authenticate with 00:02:6f:98:0e:04 (try 1)
[  473.678882] wlan0: authenticated
[  473.678987] wlan0: associate with 00:02:6f:98:0e:04 (try 1)
[  473.681883] wlan0: RX AssocResp from 00:02:6f:98:0e:04 (capab=0xc31 status=0 aid=1)
[  473.681892] wlan0: associated
[  473.681900] wlan0: moving STA 00:02:6f:98:0e:04 to state 1
[  473.681906] wlan0: moving STA 00:02:6f:98:0e:04 to state 2
[  473.681911] wlan0: moving STA 00:02:6f:98:0e:04 to state 3
[seliason@localhost ~]$



tail -n 20 /var/log/syslog output

Code: Select all

Jun 20 13:52:01 localhost kernel: [  622.790401] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 20 13:52:01 localhost kernel: [  622.790408] usb 5-2: Product: External HDD   
Jun 20 13:52:01 localhost kernel: [  622.790414] usb 5-2: Manufacturer: Western Digital
Jun 20 13:52:01 localhost kernel: [  622.790419] usb 5-2: SerialNumber: 5758455830384C3239333135
Jun 20 13:52:01 localhost kernel: [  622.791963] usb-storage 5-2:1.0: Quirks match for vid 1058 pid 0704: 8000
Jun 20 13:52:01 localhost kernel: [  622.792072] scsi9 : usb-storage 5-2:1.0
Jun 20 13:52:01 localhost mtp-probe: checking bus 5, device 4: "/sys/devices/pci0000:00/0000:00:12.2/usb5/5-2"
Jun 20 13:52:01 localhost mtp-probe: bus: 5, device: 4 was not an MTP device
Jun 20 13:52:02 localhost kernel: [  623.795078] scsi 9:0:0:0: Direct-Access     WD       3200BMV External 1.05 PQ: 0 ANSI: 4
Jun 20 13:52:02 localhost kernel: [  623.800232] sd 9:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Jun 20 13:52:02 localhost kernel: [  623.801104] sd 9:0:0:0: [sdd] Write Protect is off
Jun 20 13:52:02 localhost kernel: [  623.801113] sd 9:0:0:0: [sdd] Mode Sense: 21 00 00 00
Jun 20 13:52:02 localhost kernel: [  623.802062] sd 9:0:0:0: [sdd] No Caching mode page present
Jun 20 13:52:02 localhost kernel: [  623.802072] sd 9:0:0:0: [sdd] Assuming drive cache: write through
Jun 20 13:52:02 localhost kernel: [  623.805816] sd 9:0:0:0: [sdd] No Caching mode page present
Jun 20 13:52:02 localhost kernel: [  623.805828] sd 9:0:0:0: [sdd] Assuming drive cache: write through
Jun 20 13:52:02 localhost kernel: [  623.806542]  sdd: sdd1
Jun 20 13:52:02 localhost kernel: [  623.810649] sd 9:0:0:0: [sdd] No Caching mode page present
Jun 20 13:52:02 localhost kernel: [  623.810659] sd 9:0:0:0: [sdd] Assuming drive cache: write through
Jun 20 13:52:02 localhost kernel: [  623.810666] sd 9:0:0:0: [sdd] Attached SCSI disk


I also just booted from a live CD of Ubuntu 12:04....both disks mountd but I did not have permission to view the files.

So is it safe to assume that this is a permissions issue and not a mount point issue?

Please show the output of

Code: Select all

mount

when the disks are mounted and output from

Code: Select all

ls -la /media

(or otherwise from the directory where the mountpoints are located)

In general, i think you're hitting viewtopic.php?p=5136#p5136 which is easily fixable.

Mount output:

Code: Select all

rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
devtmpfs on /dev type devtmpfs (rw,nosuid,relatime,size=1406668k,nr_inodes=351667,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sda1 on / type ext4 (rw,noatime,user_xattr,barrier=1,data=ordered)
tmpfs on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,relatime,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=23,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
systemd-1 on /proc/bus/usb type autofs (rw,relatime,fd=16,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
securityfs on /sys/kernel/security type securityfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
/dev/sda6 on /home type ext4 (rw,noatime,user_xattr,barrier=1,data=ordered)
usbfs on /proc/bus/usb type usbfs (rw,relatime,devgid=43,devmode=664)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
/dev/sdd1 on /media/MUSIC type ext4 (rw,nosuid,nodev,relatime,user_xattr,acl,barrier=1,data=ordered)


If they are ext4, then they will have permissions.
Because Ubuntu and Mageia use different UID numbers for the first user there is a good chance your user does not have permission to read the drive. You can fix it with

Code: Select all

su
chown -R youruser:youruser /media/mountpoint

djennings wrote:If they are ext4, then they will have permissions.
Because Ubuntu and Mageia use different UID numbers for the first user there is a good chance your user does not have permission to read the drive. You can fix it with

Code: Select all

chown -R youruser:youruser /media/mountpoint

Better mention than that this also has to be done if he wants to access those files from Ubuntu again.

ls -la /media output

Code: Select all

total 16
drwxr-xr-x  4 root root 4096 Jun 20 14:17 ./
drwxr-xr-x 24 root root 4096 Jun 20 14:17 ../
drwxr-xr-x  2 root root 4096 Jun 20 10:29 cdrom/
drwxrwx---  8 1000 1000 4096 Jun 18 22:50 MUSIC/


"Music" is the exteral HD that will automount but no access.

"Pictures" is the external HD that won't mount at all....and appears to be missing....although it shows up in MCC

Complete noob question...how do I determine the mountpoint?

The reason I ask is that

Code: Select all

    chown -R user:user /media

immediately fixed the drive that automounted but would not let me see inside... it now works as intended

As for the the other drive "Pictures"....no change....shows up in system settings but will not mount.

Thanks for all the help guys

I also checked out this link https://forums.mageia.org/en/viewtopic.php?p=5136#p5136 but I'm really not sure what to do with the info...

STUMPOFWAR wrote:Complete noob question...how do I determine the mountpoint?

You already did:

STUMPOFWAR wrote:Mount output:

Code: Select all

[...]
/dev/sdd1 on /media/MUSIC type ext4 (rw,nosuid,nodev,relatime,user_xattr,acl,barrier=1,data=ordered)


Also, for the Pictures folder you mentioned, where is that located? And which of the drives from your first post is the one mentioned above, with the MUSIC?

"Pictures" is the label I gave one of the HDs. The other drive I named "music"....Music works now....Pictures doesn't. How do I know where "pictures" is? It is obviously not on the same mountpoint...right? It shows up in system settings but I can't mount it or access it.

Thanks for the response.

STUMPOFWAR wrote:

Code: Select all

/dev/sdd1 on /media/MUSIC type ext4 (rw,nosuid,nodev,relatime,user_xattr,acl,barrier=1,data=ordered)


Sometime ago i noticed the same issue, it was the mount option user_xattr. Use Option user instead.

Thanks Alf....don't know what to do with your suggestion though..I don't see that option in system ettings or MCC.

I mean this settings dialog in MCC for "local drives"
. You have to chage to expert mode to do this.

Ok...thanks...I made it to that screen..

I have two tabs..... 1 is SDA and it has my main HD...

the other tab says SDD and it says that the partition is empty....which scare the living shit out of me..... The files were all there just this morning. I did nothing but update the files through drag and drop and then eject it.

On Ubuntu...this drive was always handled differently which I never questioned because it still worked.

1) I always had to manually mount it.
2) Ubuntu never put it with the other removable media on the side of the file manager. Ubuntu always put removable media up top of the window, but this drive was always in with the normal folders (AKA Pictures, Music, documents etc). I don't know if that means anything.

I am really friggin worried....all of my children's pictures are on this drive!!!!!

As I am messing around I see two things.

MCC says the HD is empty and does not have a partition nor does it display it's drive label/name.

System Settings ---> Removable devices.....displays the drive label but refuses to mount it

I've noticed that when I attach a USB device.... the first time it recognizes it, the second time it will not.... I either have to log off and log back on, or I have to reboot.... then it will recognize it.... Not sure if that makes a difference or whether it matters in this situation, but it's an option you can try.

Also, if this is a drive will connect often, you might want to consider putting in an entry in your /etc/fstab file for that drive.

STUMPOFWAR wrote:As I am messing around I see two things.

MCC says the HD is empty and does not have a partition nor does it display it's drive label/name.

System Settings ---> Removable devices.....displays the drive label but refuses to mount it

It sounds like the MBR is corrupt.
I'd use photorec to try and get the pictures off it then testdisk to try to repair it, both are in the repositories.
If you've got enough disk space you could also use dd to make an image of the drive before working on it.