Page 1 of 1

ipv6 does not support BROADCAST matching

PostPosted: May 25th, '19, 11:22
by nuit
Hello to the whole community. Yesterday I tried to install Mageia on my pc and I had the following error during the startup after completing the installation. "ipv6 does not support BROADCAST matching" It's the only thing on the screen and I didn't know how to solve it. I'm a novice when it comes to Linux. So I went back to Windows. But the idea is to reinstall Mageia. If someone can give me instructions on how to install correctly so that I don't get this error, very thankful in advance. Best regards.

Re: ipv6 does not support BROADCAST matching

PostPosted: May 25th, '19, 22:46
by nuit
Second installation attempt, this time chipset error. I no longer know what to do to install. Thank you

Re: ipv6 does not support BROADCAST matching

PostPosted: May 26th, '19, 23:50
by doktor5000
Hi there, it might help if you would add some basic information, like what Mageia version you installed, and what medium you downloaded (e.g. classic or live installation, 32bit or 64 bit and what desktop environment you chose).
If you did complete the installation, and see the normal Mageia bootsplash animation after a reboot during startup, and if you then only get a black screen, then this means the graphical server did not start properly, which is usually an issue with graphics drivers.
Then message you described about IPV6 or whatever is not related to that at all, it's just the last message during startup before the graphical desktop starts.
For the chipset error in your second post, it would help if you know exactly what it said.

You can find some hints at https://wiki.mageia.org/en/How_to_chang ... hic_driver and https://wiki.mageia.org/en/Setup_the_graphical_server
For now, you can select a safe driver like vesa, which should help you start the graphical server.

And please add some infomation what graphics card you're using, and what computer you're using ( vendor / model ).

Re: ipv6 does not support BROADCAST matching

PostPosted: May 27th, '19, 14:08
by nuit
Hello, thank you very much for your reply. I'm using an Asus RTX. The chipset I use is the b250. i7-7700. The computer is armed. Asus rog b250f gaming. If you need more details about my pc please let me know. Thank you very much in advance. Best regards.

Re: ipv6 does not support BROADCAST matching

PostPosted: May 27th, '19, 22:45
by doktor5000
What about
doktor5000 wrote:You can find some hints at https://wiki.mageia.org/en/How_to_chang ... hic_driver and https://wiki.mageia.org/en/Setup_the_graphical_server
For now, you can select a safe driver like vesa, which should help you start the graphical server.

Re: ipv6 does not support BROADCAST matching

PostPosted: Jun 30th, '22, 21:50
by morgano
Welcome nuit :)
If you want to try without installing, you could try a Live media, i.e load Mageia onto a decent USB flash drive.
https://doc.mageia.org/installer/8/en/c ... -ISOs.html
https://wiki.mageia.org/en/Installation ... lash_drive

Re: ipv6 does not support BROADCAST matching

PostPosted: Jun 30th, '22, 22:05
by sturmvogel
This is an 3 years old thread? :?:

Re: ipv6 does not support BROADCAST matching

PostPosted: Jun 30th, '22, 22:15
by morgano
Oops