Mageia forum

My system was working fine, then I needed to update the bios for a completely unrelated issue. Now upon logging in I get a box at the top of the screen "touch pad status".

It says something along the lines of two touchpads were detected and the the daemon can't handle this configuration. Can I stop this warning somehow?

What desktop environment do you use?
And please post the output of

Code: Select all

lspcidrake -v
xinput list
synclient -l

I'm running KDE

Here are those results, I run them as user and root, as xinput gave no result.

Code: Select all

[root@localhost ~]# lspcidrake -v
iwlwifi         : Intel Corporation|Wireless 7260 [NETWORK_OTHER] (vendor:8086 device:08b1 subv:8086 subd:c470) (rev: 6b)
i2c_i801        : Intel Corporation|8 Series SMBus Controller [SERIAL_SMBUS] (vendor:8086 device:9c22 subv:1028 subd:060a) (rev: 04)
unknown         : Intel Corporation|8 Series SATA Controller 1 [AHCI mode] [STORAGE_SATA] (vendor:8086 device:9c03 subv:1028 subd:060a) (rev: 04)
lpc_ich         : Intel Corporation|8 Series LPC Controller [BRIDGE_ISA] (vendor:8086 device:9c43 subv:1028 subd:060a) (rev: 04)
ehci_pci        : Intel Corporation|8 Series USB EHCI #1 [SERIAL_USB] (vendor:8086 device:9c26 subv:1028 subd:060a) (rev: 04)
shpchp          : Intel Corporation|8 Series PCI Express Root Port 3 [BRIDGE_PCI] (vendor:8086 device:9c14) (rev: e4)
shpchp          : Intel Corporation|8 Series PCI Express Root Port 1 [BRIDGE_PCI] (vendor:8086 device:9c10) (rev: e4)
snd_hda_intel   : Intel Corporation|8 Series HD Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:9c20 subv:1028 subd:060a) (rev: 04)
mei_me          : Intel Corporation|8 Series HECI #0 [COMMUNICATION_OTHER] (vendor:8086 device:9c3a subv:1028 subd:060a) (rev: 04)
xhci_pci        : Intel Corporation|8 Series USB xHCI HC [SERIAL_USB] (vendor:8086 device:9c31 subv:1028 subd:060a) (rev: 04)
snd_hda_intel   : Intel Corporation|Haswell-ULT HD Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:0a0c subv:1028 subd:060a) (rev: 0b)
Card:Intel 810 and later: Intel Corporation|Haswell-ULT Integrated Graphics Controller [DISPLAY_VGA] (vendor:8086 device:0a16 subv:1028 subd:060a) (rev: 0b)
unknown         : Intel Corporation|Haswell-ULT DRAM Controller [BRIDGE_HOST] (vendor:8086 device:0a04 subv:1028 subd:060a) (rev: 0b)
hub             : Linux 4.1.15-desktop-2.mga5 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0003)
hub             : Linux 4.1.15-desktop-2.mga5 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
usbhid          : SYNAPTICS|Synaptics Large Touch Screen [Human Interface Device|No Subclass|None] (vendor:06cb device:0af8)
uvcvideo        : CN0Y2TKG7248742ED2GPA00|Integrated_Webcam_HD [Video|Video Control] (vendor:0bda device:5752)
btusb           : Intel Corp.|Unknown [Wireless|Radio Frequency|Bluetooth] (vendor:8087 device:07dc)
hub             : Linux 4.1.15-desktop-2.mga5 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
hub             : Intel Corp.|Unknown [Hub|Unused|Full speed (or root) hub] (vendor:8087 device:8000)
hid_rmi         : DLL060A:00 06CB:2734
hid_multitouch  : SYNAPTICS Synaptics Large Touch Screen
[root@localhost ~]# xinput list
-bash: xinput: command not found
[root@localhost ~]# synclient -l
Parameter settings:
    LeftEdge                = 163
    RightEdge               = 3908
    TopEdge                 = 134
    BottomEdge              = 2339
    FingerLow               = 25
    FingerHigh              = 30
    MaxTapTime              = 180
    MaxTapMove              = 209
    MaxDoubleTapTime        = 180
    SingleTapTimeout        = 180
    ClickTime               = 100                                                                                                                                                                                 
    EmulateMidButtonTime    = 0                                                                                                                                                                                   
    EmulateTwoFingerMinZ    = 282                                                                                                                                                                                 
    EmulateTwoFingerMinW    = 7                                                                                                                                                                                   
    VertScrollDelta         = 95                                                                                                                                                                                   
    HorizScrollDelta        = 95                                                                                                                                                                                   
    VertEdgeScroll          = 1                                                                                                                                                                                   
    HorizEdgeScroll         = 0                                                                                                                                                                                   
    CornerCoasting          = 0                                                                                                                                                                                   
    VertTwoFingerScroll     = 0                                                                                                                                                                                   
    HorizTwoFingerScroll    = 0                                                                                                                                                                                   
    MinSpeed                = 1                                                                                                                                                                                   
    MaxSpeed                = 1.75                                                                                                                                                                                 
    AccelFactor             = 0.0420168                                                                                                                                                                           
    TouchpadOff             = 2
    LockedDrags             = 0
    LockedDragTimeout       = 5000
    RTCornerButton          = 0
    RBCornerButton          = 0
    LTCornerButton          = 0
    LBCornerButton          = 0
    TapButton1              = 1
    TapButton2              = 3
    TapButton3              = 2
    ClickFinger1            = 1
    ClickFinger2            = 3
    ClickFinger3            = 2
    CircularScrolling       = 0
    CircScrollDelta         = 0.1
    CircScrollTrigger       = 0
    CircularPad             = 0
    PalmDetect              = 0
    PalmMinWidth            = 10
    PalmMinZ                = 200
    CoastingSpeed           = 20
    CoastingFriction        = 50
    PressureMotionMinZ      = 30
    PressureMotionMaxZ      = 160
    PressureMotionMinFactor = 1
    PressureMotionMaxFactor = 1
    GrabEventDevice         = 0
    TapAndDragGesture       = 1
    AreaLeftEdge            = 0
    AreaRightEdge           = 0
    AreaTopEdge             = 0
    AreaBottomEdge          = 0
    HorizHysteresis         = 23
    VertHysteresis          = 23
    ClickPad                = 1
    RightButtonAreaLeft     = 2035
    RightButtonAreaRight    = 0
    RightButtonAreaTop      = 2027
    RightButtonAreaBottom   = 0
    MiddleButtonAreaLeft    = 0
    MiddleButtonAreaRight   = 0
    MiddleButtonAreaTop     = 0
    MiddleButtonAreaBottom  = 0


And I forgot to mention this has a touch screen, so that may be something to do with it. Interesting that it never complained prior to the BIOS update.

For xinput, you may need to install the xinput package, and then run that xinput query again as normal user.
Also please mention what model/make your box is, and please attach the complete /var/log/Xorg.0.log

It's a Dell XPS13, 9333 version.

Code: Select all

[root@localhost ~]# xinput list
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ SYNAPTICS Synaptics Large Touch Screen    id=9    [slave  pointer  (2)]
⎜   ↳ DLL060A:00 06CB:2734                      id=11   [slave  pointer  (2)]
⎜   ↳ SynPS/2 Synaptics TouchPad                id=13   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Power Button                              id=6    [slave  keyboard (3)]
    ↳ Video Bus                                 id=7    [slave  keyboard (3)]
    ↳ Power Button                              id=8    [slave  keyboard (3)]
    ↳ Integrated_Webcam_HD                      id=10   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard              id=12   [slave  keyboard (3)]
    ↳ Dell WMI hotkeys                          id=14   [slave  keyboard (3)]


And here's Xorg.0.log

Code: Select all

[     8.445]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[     8.445] X Protocol Version 11, Revision 0
[     8.445] Build Operating System: Linux_3.19.8-server-3.mga5 Mageia
[     8.445] Current Operating System: Linux localhost.localdomain 4.1.15-desktop-2.mga5 #1 SMP Wed Jan 20 17:05:51 UTC 2016 x86_64
[     8.445] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=d1124340-3d44-41c3-9589-04a39df365a1 ro splash quiet noiswmd resume=UUID=89396844-b054-4f3c-92a6-b3bf6f197c9f
[     8.445] Build Date: 15 August 2015  11:59:53AM
[     8.445] 
[     8.445] Current version of pixman: 0.32.8
[     8.445]    Before reporting problems, check http://bugs.mageia.org
   to make sure that you have the latest version.
[     8.445] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.445] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 11 20:04:46 2016
[     8.446] (==) Using config file: "/etc/X11/xorg.conf"
[     8.446] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     8.446] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.447] (==) ServerLayout "layout1"
[     8.447] (**) |-->Screen "screen1" (0)
[     8.447] (**) |   |-->Monitor "monitor1"
[     8.448] (**) |   |-->Device "device1"
[     8.448] (**) Option "DontZap" "False"
[     8.448] (**) Option "AllowMouseOpenFail"
[     8.448] (==) Automatically adding devices
[     8.448] (==) Automatically enabling devices
[     8.448] (==) Automatically adding GPU devices
[     8.448] (==) FontPath set to:
   catalogue:/etc/X11/fontpath.d
[     8.448] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[     8.448] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.448] (II) Loader magic: 0x811d80
[     8.448] (II) Module ABI versions:
[     8.448]    X.Org ANSI C Emulation: 0.4
[     8.448]    X.Org Video Driver: 18.0
[     8.448]    X.Org XInput driver : 21.0
[     8.448]    X.Org Server Extension : 8.0
[     8.449] (EE) systemd-logind: failed to get session: PID 882 does not belong to any known session
[     8.449] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.449] (--) PCI:*(0:0:2:0) 8086:0a16:1028:060a rev 11, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[     8.449] (II) Open ACPI successful (/var/run/acpid.socket)
[     8.450] (II) "glx" will be loaded by default.
[     8.450] (II) LoadModule: "v4l"
[     8.454] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[     8.455] (II) Module v4l: vendor="X.Org Foundation"
[     8.455]    compiled for 1.16.1, module version = 0.1.1
[     8.455]    ABI class: X.Org Video Driver, version 18.0
[     8.455] (II) LoadModule: "glx"
[     8.455] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     8.466] (II) Module glx: vendor="X.Org Foundation"
[     8.466]    compiled for 1.16.4, module version = 1.0.0
[     8.466]    ABI class: X.Org Server Extension, version 8.0
[     8.466] (==) AIGLX enabled
[     8.466] (II) LoadModule: "intel"
[     8.466] (II) Loading /usr/lib64/xorg/modules/drivers/intel-common/intel_drv.so
[     8.469] (II) Module intel: vendor="X.Org Foundation"
[     8.469]    compiled for 1.16.4, module version = 2.99.917
[     8.469]    Module class: X.Org Video Driver
[     8.469]    ABI class: X.Org Video Driver, version 18.0
[     8.470] (II) v4l driver for Video4Linux
[     8.470] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     8.470] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     8.470] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     8.470] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     8.470] (++) using VT number 1

[     8.470] (WW) Falling back to old probe method for v4l
[     8.471] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[     8.472] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[     8.472] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     8.472] (II) intel(0): Creating default Display subsection in Screen section
   "screen1" for depth/fbbpp 24/32
[     8.472] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     8.472] (==) intel(0): RGB weight 888
[     8.472] (==) intel(0): Default visual is TrueColor
[     8.473] (II) intel(0): Output eDP1 using monitor section monitor1
[     8.473] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     8.473] (II) intel(0): Enabled output eDP1
[     8.473] (II) intel(0): Output DP1 has no monitor section
[     8.473] (II) intel(0): Enabled output DP1
[     8.473] (II) intel(0): Output HDMI1 has no monitor section
[     8.473] (II) intel(0): Enabled output HDMI1
[     8.473] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     8.473] (II) intel(0): Output VIRTUAL1 has no monitor section
[     8.473] (II) intel(0): Enabled output VIRTUAL1
[     8.473] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     8.473] (==) intel(0): TearFree disabled
[     8.473] (==) intel(0): DPI set to (96, 96)
[     8.473] (II) Loading sub module "dri2"
[     8.473] (II) LoadModule: "dri2"
[     8.473] (II) Module "dri2" already built-in
[     8.473] (II) Loading sub module "present"
[     8.473] (II) LoadModule: "present"
[     8.473] (II) Module "present" already built-in
[     8.574] (==) Depth 24 pixmap format is 32 bpp
[     8.577] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[     8.577] (==) intel(0): Backing store enabled
[     8.577] (==) intel(0): Silken mouse enabled
[     8.577] (II) intel(0): HW Cursor enabled
[     8.577] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.578] (**) intel(0): DPMS enabled
[     8.578] (==) intel(0): Display hotplug detection enabled
[     8.652] (II) intel(0): [DRI2] Setup complete
[     8.652] (II) intel(0): [DRI2]   DRI driver: i965
[     8.652] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     8.652] (II) intel(0): direct rendering: DRI2 enabled
[     8.652] (II) intel(0): hardware support for Present enabled
[     8.652] (--) RandR disabled
[     8.705] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     8.705] (II) AIGLX: enabled GLX_ARB_create_context
[     8.705] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     8.705] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     8.705] (II) AIGLX: enabled GLX_INTEL_swap_event
[     8.705] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     8.705] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     8.705] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     8.705] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     8.705] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     8.705] (II) AIGLX: Loaded and initialized i965
[     8.705] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.720] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     8.720] (II) intel(0): Setting screen physical size to 508 x 285
[     8.787] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     8.787] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.787] (**) Power Button: Applying InputClass "system-keyboard"
[     8.787] (II) LoadModule: "evdev"
[     8.787] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[     8.789] (II) Module evdev: vendor="X.Org Foundation"
[     8.789]    compiled for 1.16.2, module version = 2.9.1
[     8.789]    Module class: X.Org XInput Driver
[     8.789]    ABI class: X.Org XInput driver, version 21.0
[     8.789] (II) Using input driver 'evdev' for 'Power Button'
[     8.789] (**) Power Button: always reports core events
[     8.789] (**) evdev: Power Button: Device: "/dev/input/event4"
[     8.789] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.789] (--) evdev: Power Button: Found keys
[     8.789] (II) evdev: Power Button: Configuring as keyboard
[     8.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[     8.789] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.789] (**) Option "xkb_rules" "evdev"
[     8.789] (**) Option "xkb_model" "pc105"
[     8.789] (**) Option "xkb_layout" "us"
[     8.789] (**) Option "xkb_options" "compose:rwin"
[     8.806] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     8.806] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.806] (**) Video Bus: Applying InputClass "system-keyboard"
[     8.806] (II) Using input driver 'evdev' for 'Video Bus'
[     8.806] (**) Video Bus: always reports core events
[     8.806] (**) evdev: Video Bus: Device: "/dev/input/event5"
[     8.806] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.806] (--) evdev: Video Bus: Found keys
[     8.806] (II) evdev: Video Bus: Configuring as keyboard
[     8.806] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[     8.806] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.806] (**) Option "xkb_rules" "evdev"
[     8.806] (**) Option "xkb_model" "pc105"
[     8.806] (**) Option "xkb_layout" "us"
[     8.806] (**) Option "xkb_options" "compose:rwin"
[     8.806] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     8.806] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.806] (**) Power Button: Applying InputClass "system-keyboard"
[     8.806] (II) Using input driver 'evdev' for 'Power Button'
[     8.806] (**) Power Button: always reports core events
[     8.806] (**) evdev: Power Button: Device: "/dev/input/event2"
[     8.806] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.806] (--) evdev: Power Button: Found keys
[     8.806] (II) evdev: Power Button: Configuring as keyboard
[     8.806] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[     8.806] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     8.806] (**) Option "xkb_rules" "evdev"
[     8.806] (**) Option "xkb_model" "pc105"
[     8.806] (**) Option "xkb_layout" "us"
[     8.806] (**) Option "xkb_options" "compose:rwin"
[     8.807] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     8.807] (II) No input driver specified, ignoring this device.
[     8.807] (II) This device may have been added with another device file.
[     8.807] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[     8.807] (II) No input driver specified, ignoring this device.
[     8.807] (II) This device may have been added with another device file.
[     8.807] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event7)
[     8.807] (II) No input driver specified, ignoring this device.
[     8.807] (II) This device may have been added with another device file.
[     8.808] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[     8.808] (II) No input driver specified, ignoring this device.
[     8.808] (II) This device may have been added with another device file.
[     8.808] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/event13)
[     8.808] (**) SYNAPTICS Synaptics Large Touch Screen: Applying InputClass "evdev touchscreen catchall"
[     8.808] (II) Using input driver 'evdev' for 'SYNAPTICS Synaptics Large Touch Screen'
[     8.808] (**) SYNAPTICS Synaptics Large Touch Screen: always reports core events
[     8.808] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: Device: "/dev/input/event13"
[     8.859] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Vendor 0x6cb Product 0xaf8
[     8.859] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute axes
[     8.859] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found x and y absolute axes
[     8.859] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute touchscreen
[     8.859] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Configuring as touchscreen
[     8.859] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: YAxisMapping: buttons 4 and 5
[     8.859] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.859] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:06CB:0AF8.0001/input/input14/event13"
[     8.859] (II) XINPUT: Adding extended input device "SYNAPTICS Synaptics Large Touch Screen" (type: TOUCHSCREEN, id 9)
[     8.859] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: initialized for absolute axes.
[     8.859] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) keeping acceleration scheme 1
[     8.859] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration profile 0
[     8.859] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration factor: 2.000
[     8.859] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration threshold: 4
[     8.859] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/mouse2)
[     8.859] (II) No input driver specified, ignoring this device.
[     8.859] (II) This device may have been added with another device file.
[     8.860] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event14)
[     8.860] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[     8.860] (**) Integrated_Webcam_HD: Applying InputClass "system-keyboard"
[     8.860] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[     8.860] (**) Integrated_Webcam_HD: always reports core events
[     8.860] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event14"
[     8.860] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x5752
[     8.860] (--) evdev: Integrated_Webcam_HD: Found keys
[     8.860] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[     8.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input16/event14"
[     8.860] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[     8.860] (**) Option "xkb_rules" "evdev"
[     8.860] (**) Option "xkb_model" "pc105"
[     8.860] (**) Option "xkb_layout" "us"
[     8.860] (**) Option "xkb_options" "compose:rwin"
[     8.860] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[     8.860] (II) No input driver specified, ignoring this device.
[     8.860] (II) This device may have been added with another device file.
[     8.860] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10)
[     8.860] (II) No input driver specified, ignoring this device.
[     8.860] (II) This device may have been added with another device file.
[     8.860] (II) config/udev: Adding input device DLL060A:00 06CB:2734 (/dev/input/event11)
[     8.860] (**) DLL060A:00 06CB:2734: Applying InputClass "evdev touchpad catchall"
[     8.861] (**) DLL060A:00 06CB:2734: Applying InputClass "touchpad catchall"
[     8.861] (**) DLL060A:00 06CB:2734: Applying InputClass "Default clickpad buttons"
[     8.861] (II) LoadModule: "synaptics"
[     8.861] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[     8.861] (II) Module synaptics: vendor="X.Org Foundation"
[     8.861]    compiled for 1.16.4, module version = 1.8.1
[     8.861]    Module class: X.Org XInput Driver
[     8.862]    ABI class: X.Org XInput driver, version 21.0
[     8.862] (II) Using input driver 'synaptics' for 'DLL060A:00 06CB:2734'
[     8.862] (**) DLL060A:00 06CB:2734: always reports core events
[     8.862] (**) Option "Device" "/dev/input/event11"
[     8.892] (II) synaptics: DLL060A:00 06CB:2734: found clickpad property
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: x-axis range 1 - 4070 (res 41)
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: y-axis range 1 - 2472 (res 41)
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: pressure range 0 - 255
[     8.892] (II) synaptics: DLL060A:00 06CB:2734: device does not report finger width.
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: buttons: left double triple
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: Vendor 0x6cb Product 0x2734
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: invalid finger width range.  defaulting to 0 - 15
[     8.892] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     8.892] (--) synaptics: DLL060A:00 06CB:2734: touchpad found
[     8.892] (**) DLL060A:00 06CB:2734: always reports core events
[     8.906] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT33C3:00/i2c-8/i2c-DLL060A:00/0018:06CB:2734.0002/input/input12/event11"
[     8.906] (II) XINPUT: Adding extended input device "DLL060A:00 06CB:2734" (type: TOUCHPAD, id 11)
[     8.906] (**) synaptics: DLL060A:00 06CB:2734: (accel) MinSpeed is now constant deceleration 2.5
[     8.906] (**) synaptics: DLL060A:00 06CB:2734: (accel) MaxSpeed is now 1.75
[     8.906] (**) synaptics: DLL060A:00 06CB:2734: (accel) AccelFactor is now 0.042
[     8.906] (**) DLL060A:00 06CB:2734: (accel) keeping acceleration scheme 1
[     8.906] (**) DLL060A:00 06CB:2734: (accel) acceleration profile 1
[     8.906] (**) DLL060A:00 06CB:2734: (accel) acceleration factor: 2.000
[     8.906] (**) DLL060A:00 06CB:2734: (accel) acceleration threshold: 4
[     8.907] (--) synaptics: DLL060A:00 06CB:2734: touchpad found
[     8.907] (II) config/udev: Adding input device DLL060A:00 06CB:2734 (/dev/input/mouse1)
[     8.907] (II) No input driver specified, ignoring this device.
[     8.907] (II) This device may have been added with another device file.
[     8.907] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     8.907] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.907] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     8.907] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.907] (**) AT Translated Set 2 keyboard: always reports core events
[     8.907] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     8.907] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.907] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.907] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.907] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     8.907] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     8.907] (**) Option "xkb_rules" "evdev"
[     8.907] (**) Option "xkb_model" "pc105"
[     8.907] (**) Option "xkb_layout" "us"
[     8.907] (**) Option "xkb_options" "compose:rwin"
[     8.908] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[     8.908] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     8.908] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     8.908] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     8.908] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     8.908] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     8.908] (**) Option "Device" "/dev/input/event1"
[     8.933] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 45)
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1132 - 4722 (res 60)
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     8.933] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     8.933] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     8.933] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     8.948] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[     8.948] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[     8.948] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     8.948] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     8.948] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[     8.948] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     8.948] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     8.948] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     8.948] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     8.948] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     8.948] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     8.948] (II) No input driver specified, ignoring this device.
[     8.948] (II) This device may have been added with another device file.
[     8.949] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[     8.949] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.949] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[     8.949] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[     8.949] (**) Dell WMI hotkeys: always reports core events
[     8.949] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event12"
[     8.949] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[     8.949] (--) evdev: Dell WMI hotkeys: Found keys
[     8.949] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[     8.949] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[     8.949] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[     8.949] (**) Option "xkb_rules" "evdev"
[     8.949] (**) Option "xkb_model" "pc105"
[     8.949] (**) Option "xkb_layout" "us"
[     8.949] (**) Option "xkb_options" "compose:rwin"
[    53.201] (II) intel(0): EDID vendor "CMN", prod id 4933
[    53.201] (II) intel(0): Printing DDC gathered Modelines:
[    53.201] (II) intel(0): Modeline "1920x1080"x0.0  138.78  1920 1966 1996 2080  1080 1082 1086 1112 +hsync -vsync (66.7 kHz eP)
[    53.201] (II) intel(0): Modeline "1920x1080"x0.0  111.02  1920 1966 1996 2080  1080 1082 1086 1112 +hsync -vsync (53.4 kHz e)


xboxboy wrote:⎜ ↳ SYNAPTICS Synaptics Large Touch Screen id=9 [slave pointer (2)]
⎜ ↳ DLL060A:00 06CB:2734 id=11 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]

As you guessed, the touchscreen seems to be also handled by synaptics driver, hence this might look to the system like you have two touchpads.

Sorry for the late reply, but I might need to read up a little more on this, as searching for anything related to synaptic or touchpad only yields the really basic stuff, or stuff related to multi-touch support on only one touchpad, nothing about multiple touchpads.
You could try to disable the touchscreen via https://wiki.archlinux.org/index.php/To ... are_toggle but the script would need to be called by the display manager before the actual desktop starts.
You could also try to ask in KDE forums if there's a way to supress the touchscreen from enabling.

Thanks for the reply. Interesting that it only occurred after the bios update on an existing install, and due to warranty for an unrelated issue, on a clean install.

Don't really want to disable the touch screen. I'll do some reading also.