hybrid-graphics-ati/intel

This forum is for general chat between members about Mageia.

Technical questions are supposed to be posted in support forums. Not here !

hybrid-graphics-ati/intel

Postby Roby333 » Mar 6th, '13, 11:46

Mageia 2 kde - Hp probook 4730s 4xIntel i5 2450m
Code: Select all
lspci | grep VGA:
VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller
VGA compatible controller: ATI Technologies Inc Seymour [Radeon HD 6400M Series]
lshw -c display | grep driver:
configuration: driver=i915 latency=0
but I have problems with temperatures:
acpitz-virtual-0
Adapter: Virtual device
temp1:        +51.0°C  (crit = +128.0°C)
temp2:        +51.0°C  (crit = +128.0°C)
temp3:        +32.0°C  (crit = +128.0°C)
temp4:        +44.0°C  (crit = +128.0°C)
temp5:        +20.0°C  (crit = +128.0°C)
temp6:         +0.0°C  (crit = +128.0°C)
temp7:         +0.0°C  (crit = +128.0°C)
temp8:         +0.0°C  (crit = +128.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +55.0°C  (high = +86.0°C, crit = +100.0°C)
Core 0:         +55.0°C  (high = +86.0°C, crit = +100.0°C)
Core 1:         +54.0°C  (high = +86.0°C, crit = +100.0°C)

at this time are not very high, usually about 60
normal temperatures are around the 40 ( Win) and in arch I solved with hybrid-video-ati-intel package
A few tips to properly install the driver? Thanhs
Roby333
 
Posts: 3
Joined: Mar 6th, '13, 11:14

Re: hybrid-graphics-ati/intel

Postby martinw » Mar 8th, '13, 00:34

If you type
Code: Select all
cat /sys/kernel/debug/vgaswitcheroo/switch

in a terminal window, do you see something like this
Code: Select all
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Pwr:0000:01:00.0

If so, type
Code: Select all
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

(you'll need to be the root user to do this). Repeating the first command, you should now see something like
Code: Select all
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Off:0000:01:00.0

which means your discrete graphics card has been turned off. This should reduce power consumption and hence temperature. This does mean you can only use the integrated (Intel) graphics.

Alternatively, install the proprietary 'fglrx' driver, and in the Catalyst Control Centre, enable PowerPlay. On my notebook with ATI/Intel hybrid graphics, this (surprisingly) resulted in lower power consumption than using the Intel graphics.

Note that these two solutions are mutually exclusive - vgaswitcheroo is only present if the free 'radeon' driver is installed.
martinw
 
Posts: 608
Joined: May 14th, '11, 10:59

Re: hybrid-graphics-ati/intel

Postby Roby333 » Mar 8th, '13, 14:15

I understand. thanks you were very accurate and simple
Roby
Roby333
 
Posts: 3
Joined: Mar 6th, '13, 11:14

Re: hybrid-graphics-ati/intel

Postby isadora » Mar 8th, '13, 16:46

But did it work? :D
..........bird from paradise..........

Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.
—Antoine de Saint-Exupéry
User avatar
isadora
 
Posts: 2765
Joined: Mar 25th, '11, 16:03
Location: Netherlands

Re: hybrid-graphics-ati/intel

Postby Roby333 » Mar 9th, '13, 13:01

0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Off:0000:01:00.0
so the temperature drops enough
At least you don't hear the fans always run
Roby333
 
Posts: 3
Joined: Mar 6th, '13, 11:14


Return to General discussions about Mageia

Who is online

Users browsing this forum: No registered users and 1 guest

cron