[SOLVED] pulseaudio cant see headphones microphones

[SOLVED] pulseaudio cant see headphones microphones

Postby sameeeer » Jul 19th, '21, 01:35

hello again everyone

nice to see all of you again

today i faced a strange behaviour from pulseaudio

all its features are working good but strangly it cant detect the built-in headphones microphones

also its equalizer cant be launched because my system is lacking pulseaudio dbus according to what command line said

to be honest equalizer is not important to me like the microphones

so how can we fix microphones bug for now

NEW UPDATE

all the problem that i explained for you here is with bluetooth headphones not with analog headphone beacause they work fine

thanks again
Last edited by sameeeer on Jul 30th, '21, 16:55, edited 1 time in total.
sameeeer
 
Posts: 10
Joined: Jun 25th, '21, 20:18

Re: pulseaudio cant see headphones microphones

Postby doktor5000 » Jul 19th, '21, 17:10

Hi there, your description is a bit confusing.

So this is only about bluetooth headphones - do they output sound just fine and only microphone is not working, or is nothing working at all. And how did you test sound output and microphone ?

For the equalizer, what did you run in particular ?

Also, what desktop environment do you use, what Mageia version and how did you pair the bluetooth headset ?
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 16794
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: pulseaudio cant see headphones microphones

Postby sameeeer » Jul 19th, '21, 17:58

hello a gain doktor5000 and thanks again for help

here the INFOS for all your points

- 1st point
yes headphones outputs working without any problem i can hear everything
but in the other hand the built-in microphone cant be detected by pulseaudio

- 2nd point
for the equlizer i did these things
a - install pulseaudio-module-equalizer
b - i opened pulseaudio setting to check it but there is nothing there
c - i run this command line
Code: Select all
qpaeq

and i got this result
Code: Select all
There was an error connecting to pulseaudio, please make sure you have the pulseaudio dbus module loaded, exiting...


:) i think i need to reboot my system to make it happend maybe pulseaudio is one of the systems services that need rebooting to take effect :)

-: update :-

system rebooting didnt help



- 3rd point
i am useing
mageia 8 / plasma desktop / pair my headphone through plasma bluetooth applet
sameeeer
 
Posts: 10
Joined: Jun 25th, '21, 20:18

Re: pulseaudio cant see headphones microphones

Postby doktor5000 » Jul 19th, '21, 21:04

sameeeer wrote:yes headphones outputs working without any problem i can hear everything
but in the other hand the built-in microphone cant be detected by pulseaudio[/color]

In the edit in your first post you mentioned bluetooth headphones, now you mention the built-in microphone - which is it now ?

Can you post the output as regular user of
Code: Select all
bluetoothctl --devices
pacmd ls


sameeeer wrote:i run this command line
Code: Select all
qpaeq


qpaeq is broken since years, have a look at https://bugs.mageia.org/show_bug.cgi?id=14709
I've posted a workaround in viewtopic.php?p=47325#p47325, it worked then when loading the equalizer and dbus modules manually beforehand.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 16794
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: pulseaudio cant see headphones microphones

Postby sameeeer » Jul 19th, '21, 22:42

doktor5000 wrote:
sameeeer wrote:yes headphones outputs working without any problem i can hear everything
but in the other hand the built-in microphone cant be detected by pulseaudio[/color]

In the edit in your first post you mentioned bluetooth headphones, now you mention the built-in microphone - which is it now ?


:) sorry doktor5000 :)

i will make it clear for you to understand me clearly :D i am really sorry to confuse you from the begining

here let me help you

you see i i have three wirless headphones in my home all of them have a built-in microphone and those are

1 - sony wh-ch510
2 - beats solo pro
3 - apple airpods

listening to any thing is no problem for me because thier output working fine , my problem is thier inputs are not working (( the built-in microphones to speak to other people ))

because pulseaudio only can see the headphones without thier microphones

i have pictures for pulseaudio window if you like i post them to you

doktor5000 wrote:Can you post the output as regular user of
Code: Select all
bluetoothctl --devices
pacmd ls



OK ..... here is the results

Code: Select all
bluetoothctl --devices
bluetoothctl: unrecognized option '--devices'
bluetoothctl ver 5.55
Usage:
        bluetoothctl [--options] [commands]
Options:
        --agent         Register agent handler: <capability>
        --monitor       Enable monitor output
        --timeout       Timeout in seconds for non-interactive mode
        --version       Display version
        --help          Display help


Code: Select all
pacmd ls
Memory blocks currently allocated: 1, size: 63.9 KiB.
Memory blocks allocated during the whole lifetime: 42554, size: 101.7 MiB.
Memory blocks imported from other processes: 0, size: 0 B.
Memory blocks exported to other processes: 0, size: 0 B.
Total sample cache size: 0 B.
Default sample spec: s16le 2ch 44100Hz
Default channel map: front-left,front-right
Default sink name: alsa_output.pci-0000_08_00.1.hdmi-stereo
Default source name: bluez_sink.74_45_CE_47_84_3D.a2dp_sink.monitor
Memory blocks of type POOL: 1 allocated/16470 accumulated.
Memory blocks of type POOL_EXTERNAL: 0 allocated/20218 accumulated.
Memory blocks of type APPENDED: 0 allocated/0 accumulated.
Memory blocks of type USER: 0 allocated/0 accumulated.
Memory blocks of type FIXED: 0 allocated/25822 accumulated.
Memory blocks of type IMPORTED: 0 allocated/262 accumulated.
27 module(s) loaded.
    index: 0
        name: <module-device-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the volume/mute state of devices"
                module.version = "14.2.0-2.1.mga8"
    index: 1
        name: <module-stream-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the volume/mute/device state of streams"
                module.version = "14.2.0-2.1.mga8"
    index: 2
        name: <module-card-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore profile of cards"
                module.version = "14.2.0-2.1.mga8"
    index: 3
        name: <module-augment-properties>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Augment the property sets of streams with additional static information"
                module.version = "14.2.0-2.1.mga8"
    index: 4
        name: <module-switch-on-port-available>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "David Henningsson"
                module.description = "Switches ports and profiles when devices are plugged/unplugged"
                module.version = "14.2.0-2.1.mga8"
    index: 5
        name: <module-udev-detect>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Detect available audio hardware and load matching drivers"
                module.version = "14.2.0-2.1.mga8"
    index: 6
        name: <module-alsa-card>
        argument: <device_id="0" name="pci-0000_08_00.1" card_name="alsa_card.pci-0000_08_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
        used: 0
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "14.2.0-2.1.mga8"
    index: 7
        name: <module-alsa-card>
        argument: <device_id="1" name="pci-0000_08_00.6" card_name="alsa_card.pci-0000_08_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
        used: 0
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "14.2.0-2.1.mga8"
    index: 8
        name: <module-bluetooth-policy>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Frédéric Dalleau, Pali Rohár"
                module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
                module.version = "14.2.0-2.1.mga8"
    index: 9
        name: <module-bluetooth-discover>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "João Paulo Rechi Vita"
                module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
                module.version = "14.2.0-2.1.mga8"
    index: 10
        name: <module-bluez5-discover>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "João Paulo Rechi Vita"
                module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
                module.version = "14.2.0-2.1.mga8"
    index: 11
        name: <module-esound-protocol-unix>
        argument: <>
        used: -1
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "ESOUND protocol (UNIX sockets)"
                module.version = "14.2.0-2.1.mga8"
    index: 12
        name: <module-native-protocol-unix>
        argument: <>
        used: -1
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "Native protocol (UNIX sockets)"
                module.version = "14.2.0-2.1.mga8"
    index: 13
        name: <module-gsettings>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Sylvain Baubeau"
                module.description = "GSettings Adapter"
                module.version = "14.2.0-2.1.mga8"
    index: 14
        name: <module-default-device-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the default sink and source"
                module.version = "14.2.0-2.1.mga8"
    index: 15
        name: <module-always-sink>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Colin Guthrie"
                module.description = "Always keeps at least one sink loaded even if it's a null one"
                module.version = "14.2.0-2.1.mga8"
    index: 16
        name: <module-intended-roles>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically set device of streams based on intended roles of devices"
                module.version = "14.2.0-2.1.mga8"
    index: 17
        name: <module-suspend-on-idle>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "When a sink/source is idle for too long, suspend it"
                module.version = "14.2.0-2.1.mga8"
    index: 18
        name: <module-systemd-login>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Create a client for each login session of this user"
                module.version = "14.2.0-2.1.mga8"
    index: 19
        name: <module-position-event-sounds>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
                module.version = "14.2.0-2.1.mga8"
    index: 20
        name: <module-role-cork>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Lennart Poettering"
                module.description = "Mute & cork streams with certain roles while others exist"
                module.version = "14.2.0-2.1.mga8"
    index: 21
        name: <module-filter-heuristics>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Colin Guthrie"
                module.description = "Detect when various filters are desirable"
                module.version = "14.2.0-2.1.mga8"
    index: 22
        name: <module-filter-apply>
        argument: <>
        used: -1
        load once: yes
        properties:
                module.author = "Colin Guthrie"
                module.description = "Load filter sinks automatically when needed"
                module.version = "14.2.0-2.1.mga8"
    index: 23
        name: <module-x11-publish>
        argument: <display=:0 xauthority=/home/mageia/.Xauthority>
        used: -1
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "X11 credential publisher"
                module.version = "14.2.0-2.1.mga8"
    index: 24
        name: <module-x11-xsmp>
        argument: <display=:0 xauthority=/home/mageia/.Xauthority session_manager=local/localhost.localdomain:@/tmp/.ICE-unix/39595,unix/localhost.localdomain:/tmp/.ICE-unix/39595>
        used: -1
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "X11 session management"
                module.version = "14.2.0-2.1.mga8"
    index: 28
        name: <module-bluez5-device>
        argument: <path=/org/bluez/hci0/dev_74_45_CE_47_84_3D autodetect_mtu=0>
        used: 0
        load once: no
        properties:
                module.author = "João Paulo Rechi Vita"
                module.description = "BlueZ 5 Bluetooth audio sink and source"
                module.version = "14.2.0-2.1.mga8"
    index: 29
        name: <module-cli-protocol-unix>
        argument: <>
        used: -1
        load once: no
        properties:
                module.author = "Lennart Poettering"
                module.description = "Command line interface protocol (UNIX sockets)"
                module.version = "14.2.0-2.1.mga8"
3 sink(s) available.
    index: 1
        name: <alsa_output.pci-0000_08_00.6.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9039
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 1
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        card: 1 <alsa_card.pci-0000_08_00.6>
        module: 7
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC222 Analog"
                alsa.id = "ALC222 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd05c0000 irq 86"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:08:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "front:1"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Family 17h (Models 10h-1fh) HD Audio Controller Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-headphones"
                analog-output-headphones-2: Headphones 2 (priority 9800, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
        active port: <analog-output-headphones>
  * index: 2
        name: <alsa_output.pci-0000_08_00.1.hdmi-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 2
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        card: 0 <alsa_card.pci-0000_08_00.1>
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "HDMI 0"
                alsa.id = "HDMI 0"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "3"
                alsa.card = "0"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd05c8000 irq 85"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:08:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "1637"
                device.string = "hdmi:0"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "hdmi-stereo"
                device.profile.description = "Digital Stereo (HDMI)"
                device.description = "HD-Audio Generic Digital Stereo (HDMI)"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "video-display"
                                device.product.name = "BenQ GW2780"
        active port: <hdmi-output-0>
    index: 6
        name: <bluez_sink.74_45_CE_47_84_3D.a2dp_sink>
        driver: <module-bluez5-device.c>
        flags: HARDWARE DECIBEL_VOLUME LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9050
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max request: 4 KiB
        max rewind: 0 KiB
        monitor source: 7
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        fixed latency: 48.22 ms
        card: 5 <bluez_card.74_45_CE_47_84_3D>
        module: 28
        properties:
                bluetooth.protocol = "a2dp_sink"
                device.description = "WH-CH510"
                device.string = "74:45:CE:47:84:3D"
                device.api = "bluez"
                device.class = "sound"
                device.bus = "bluetooth"
                device.form_factor = "headset"
                bluez.path = "/org/bluez/hci0/dev_74_45_CE_47_84_3D"
                bluez.class = "0x240404"
                bluez.alias = "WH-CH510"
                device.icon_name = "audio-headset-bluetooth"
                device.intended_roles = "phone"
        ports:
                headset-output: Headset (priority 0, latency offset 0 usec, available: unknown)
                        properties:

        active port: <headset-output>
3 source(s) available.
    index: 1
        name: <alsa_output.pci-0000_08_00.6.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        monitor_of: 1
        card: 1 <alsa_card.pci-0000_08_00.6>
        module: 7
        properties:
                device.description = "Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Analog Stereo"
                device.class = "monitor"
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd05c0000 irq 86"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:08:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "1"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
    index: 2
        name: <alsa_output.pci-0000_08_00.1.hdmi-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
        monitor_of: 2
        card: 0 <alsa_card.pci-0000_08_00.1>
        module: 6
        properties:
                device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd05c8000 irq 85"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:08:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "1637"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
  * index: 7
        name: <bluez_sink.74_45_CE_47_84_3D.a2dp_sink.monitor>
        driver: <module-bluez5-device.c>
        flags: DECIBEL_VOLUME LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1050
        volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        base volume: 65536 / 100% / 0.00 dB
        volume steps: 65537
        muted: no
        current latency: 0.00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        fixed latency: 48.22 ms
        monitor_of: 6
        card: 5 <bluez_card.74_45_CE_47_84_3D>
        module: 28
        properties:
                device.description = "Monitor of WH-CH510"
                device.class = "monitor"
                device.string = "74:45:CE:47:84:3D"
                device.api = "bluez"
                device.bus = "bluetooth"
                device.form_factor = "headset"
                bluez.path = "/org/bluez/hci0/dev_74_45_CE_47_84_3D"
                bluez.class = "0x240404"
                bluez.alias = "WH-CH510"
                device.icon_name = "audio-headset-bluetooth"
                device.intended_roles = "phone"
6 client(s) logged in.
    index: 0
        driver: <module-systemd-login.c>
        owner module: 18
        properties:
                application.name = "Login Session c2"
                systemd-login.session = "c2"
    index: 7
        driver: <module-x11-xsmp.c>
        owner module: 24
        properties:
                application.name = "XSMP Session on KDE as 1028c1d320b210000162671074200000395950007"
                xsmp.vendor = "KDE"
                xsmp.client.id = "1028c1d320b210000162671074200000395950007"
    index: 8
        driver: <protocol-native.c>
        owner module: 12
        properties:
                application.name = "QPulse"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.process.id = "39611"
                application.process.user = "mageia"
                application.process.host = "localhost.localdomain"
                application.process.binary = "plasmashell"
                application.language = "ar_SA.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "44d245e15801424e899fe27c1b0f7017"
                application.process.session_id = "c2"
    index: 10
        driver: <protocol-native.c>
        owner module: 12
        properties:
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                window.x11.display = ":0"
                window.x11.screen = "0"
                application.process.id = "42413"
                application.process.user = "mageia"
                application.process.host = "localhost.localdomain"
                application.process.binary = "firefox"
                application.language = "ar_SA.UTF-8"
                application.process.machine_id = "44d245e15801424e899fe27c1b0f7017"
                application.process.session_id = "c2"
                application.icon_name = "firefox"
    index: 11
        driver: <protocol-native.c>
        owner module: 12
        properties:
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "34"
                application.icon_name = "firefox"
                application.version = "78.12.0"
                application.process.id = "42413"
                application.process.user = "mageia"
                application.process.host = "localhost.localdomain"
                application.process.binary = "firefox"
                application.language = "ar_SA.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "44d245e15801424e899fe27c1b0f7017"
                application.process.session_id = "c2"
    index: 15
        driver: <cli.c>
        owner module: 29
        properties:
                application.name = "UNIX socket client"
3 card(s) available.
    index: 0
        name: <alsa_card.pci-0000_08_00.1>
        driver: <module-alsa-card.c>
        owner module: 6
        properties:
                alsa.card = "0"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd05c8000 irq 85"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:08:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.1/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "1637"
                device.string = "0"
                device.description = "HD-Audio Generic"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: unknown)
                off: Off (priority 0, available: unknown)
        active profile: <output:hdmi-stereo>
        sinks:
                alsa_output.pci-0000_08_00.1.hdmi-stereo/#2: HD-Audio Generic Digital Stereo (HDMI)
        sources:
                alsa_output.pci-0000_08_00.1.hdmi-stereo.monitor/#2: Monitor of HD-Audio Generic Digital Stereo (HDMI)
        ports:
                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
                        properties:
                                device.icon_name = "video-display"
                                device.product.name = "BenQ GW2780"
    index: 1
        name: <alsa_card.pci-0000_08_00.6>
        driver: <module-alsa-card.c>
        owner module: 7
        properties:
                alsa.card = "1"
                alsa.card_name = "HD-Audio Generic"
                alsa.long_card_name = "HD-Audio Generic at 0xd05c0000 irq 86"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:08:00.6"
                sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:08:00.6/sound/card1"
                device.bus = "pci"
                device.vendor.id = "1022"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
                device.product.id = "15e3"
                device.product.name = "Family 17h (Models 10h-1fh) HD Audio Controller"
                device.string = "1"
                device.description = "Family 17h (Models 10h-1fh) HD Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        profiles:
                input:analog-stereo: Analog Stereo Input (priority 65, available: no)
                output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: no)
                output:analog-surround-40: Analog Surround 4.0 Output (priority 1200, available: unknown)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 1265, available: no)
                off: Off (priority 0, available: unknown)
        active profile: <output:analog-stereo>
        sinks:
                alsa_output.pci-0000_08_00.6.analog-stereo/#1: Family 17h (Models 10h-1fh) HD Audio Controller Analog Stereo
        sources:
                alsa_output.pci-0000_08_00.6.analog-stereo.monitor/#1: Monitor of Family 17h (Models 10h-1fh) HD Audio Controller Analog Stereo
        ports:
                analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-input-microphone"
                analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
                        properties:

                analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: unknown)
                        properties:
                                device.icon_name = "audio-headphones"
                analog-output-headphones-2: Headphones 2 (priority 9800, latency offset 0 usec, available: no)
                        properties:
                                device.icon_name = "audio-headphones"
                analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
                        properties:

    index: 5
        name: <bluez_card.74_45_CE_47_84_3D>
        driver: <module-bluez5-device.c>
        owner module: 28
        properties:
                device.description = "WH-CH510"
                device.string = "74:45:CE:47:84:3D"
                device.api = "bluez"
                device.class = "sound"
                device.bus = "bluetooth"
                device.form_factor = "headset"
                bluez.path = "/org/bluez/hci0/dev_74_45_CE_47_84_3D"
                bluez.class = "0x240404"
                bluez.alias = "WH-CH510"
                device.icon_name = "audio-headset-bluetooth"
                device.intended_roles = "phone"
        profiles:
                headset_head_unit: Headset Head Unit (HSP/HFP) (priority 30, available: unknown)
                a2dp_sink: High Fidelity Playback (A2DP Sink) (priority 40, available: unknown)
                off: Off (priority 0, available: yes)
        active profile: <a2dp_sink>
        sinks:
                bluez_sink.74_45_CE_47_84_3D.a2dp_sink/#6: WH-CH510
        sources:
                bluez_sink.74_45_CE_47_84_3D.a2dp_sink.monitor/#7: Monitor of WH-CH510
        ports:
                headset-output: Headset (priority 0, latency offset 0 usec, available: unknown)
                        properties:

                headset-input: Headset (priority 0, latency offset 0 usec, available: unknown)
                        properties:

0 sink input(s) available.
0 source output(s) available.
0 cache entrie(s) available.


thanks for your help again
sameeeer
 
Posts: 10
Joined: Jun 25th, '21, 20:18

Re: pulseaudio cant see headphones microphones

Postby doktor5000 » Jul 19th, '21, 23:27

sameeeer wrote:you see i i have three wirless headphones in my home all of them have a built-in microphone and those are

1 - sony wh-ch510
2 - beats solo pro
3 - apple airpods


So it's only about the microphone for your various bluetooth headsets.

Built-in usually means the microphone which is directly attached to the case of a laptop, that's why I asked.

sameeeer wrote: index: 5
name: <bluez_card.74_45_CE_47_84_3D>
driver: <module-bluez5-device.c>
owner module: 28
properties:
device.description = "WH-CH510"
device.string = "74:45:CE:47:84:3D"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/hci0/dev_74_45_CE_47_84_3D"
bluez.class = "0x240404"
bluez.alias = "WH-CH510"
device.icon_name = "audio-headset-bluetooth"
device.intended_roles = "phone"
profiles:
headset_head_unit: Headset Head Unit (HSP/HFP) (priority 30, available: unknown)
a2dp_sink: High Fidelity Playback (A2DP Sink) (priority 40, available: unknown)
off: Off (priority 0, available: yes)
active profile: <a2dp_sink>
sinks:
bluez_sink.74_45_CE_47_84_3D.a2dp_sink/#6: WH-CH510
sources:
bluez_sink.74_45_CE_47_84_3D.a2dp_sink.monitor/#7: Monitor of WH-CH510
ports:
headset-output: Headset (priority 0, latency offset 0 usec, available: unknown)
properties:

headset-input: Headset (priority 0, latency offset 0 usec, available: unknown)
properties:


Well I see a headset-input port there. But the problem seems to be the headset is running with the wrong profile, it should be using Headset Head Unit (HSP/HFP) to use the microphone IIRC.
A2DP only support playback, but you need hands-free profile for the microphone part to work.


The other question was how did you actually test the microphone, I don't see an answer for that?
You might need to switch the input device or the headset profile to the bluetooth microphone e.g. with pavucontrol or using the KDE mixer.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 16794
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: pulseaudio cant see headphones microphones

Postby sameeeer » Jul 20th, '21, 01:30

doktor5000 wrote:The other question was how did you actually test the microphone, I don't see an answer for that?


you see i tried to record whats in my desktop through

simplescreenrecorder

if you used it before you will know that this app will ask you to set which are yours sound inputs will be go through

from ALSA or PULSEAUDIO or JACK

directaly i choosed pulseaudio and start to record a test

after finishing that i discovered there was no any sound in my record

so i opened pulseaudio and kdemixer to check if the microphone was detected by them and surprisingly none of them did that

so to solve this problem

i need to double check if its software or hardware issue and found it was a software issue.....

i already have in my hand an analogue mic so i made another test to see if pulseaudio or kdemixer can detected it and found both of them detected it

directly i opened simplescreenrecorder to record again with that mic and it works without any issues

========================================
doktor5000 wrote:You might need to switch the input device or the headset profile to the bluetooth microphone e.g. with pavucontrol or using the KDE mixer.


as you can see pulseaudio and kdemixer have issues to detect headphones built-in microphones as i mentioned above
sameeeer
 
Posts: 10
Joined: Jun 25th, '21, 20:18

Re: pulseaudio cant see headphones microphones

Postby doktor5000 » Jul 20th, '21, 19:07

sameeeer wrote:as you can see pulseaudio and kdemixer have issues to detect headphones built-in microphones as i mentioned above

No, normal microphones are just fine, this is only about bluetooth headsets. But I don't understand what you want to express with that - I just told you that you would need to switch the bluetooth profile for the headset, if you want to use the microfone.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 16794
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany

Re: pulseaudio cant see headphones microphones

Postby sameeeer » Jul 30th, '21, 05:59

Update

I dont know if this was me that i couldnt saw it in the first time or there was an update for pulseaudio last three days

anyway

i just discovered now there is a new tab in pulseaudio configuration window

and that tab is called "" configuration""

from that tab i can change the profile of the headset from A2DP to HSP/HFP

=========================

last time i mention that i have three headsets and none of their buit-in microphone is working

sameeer wrote:1 - sony wh-ch510
2 - beats solo pro
3 - apple airpods


wil i have a new one ,,,, its huawei freebuds to be sure if there is a bug in apple products connections

and i discovered this

1 - sony wh-ch510 ====> pulseaudio can change its profile and use HSP/HFP instead of A2DP , and programs like simplescreenrecorder can use that microphone

Image

2 - all the other three ====> pulseaudio also can change their profile from A2DP to HSP/HFP but will give me unavailable for their choice

Image

=========================

thats all and thanks to you all special thanks to you doktor5000
Last edited by sameeeer on Jul 30th, '21, 16:57, edited 1 time in total.
sameeeer
 
Posts: 10
Joined: Jun 25th, '21, 20:18

Re: pulseaudio cant see headphones microphones

Postby doktor5000 » Jul 30th, '21, 16:39

Please don't forget to mark the thread as solved, by editing the subject of the first post and prefix it with [SOLVED], thanks in advance.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
User avatar
doktor5000
 
Posts: 16794
Joined: Jun 4th, '11, 10:10
Location: Leipzig, Germany


Return to Sound

Who is online

Users browsing this forum: No registered users and 1 guest