No sound with Mageia 5 (upgrade and instal) SB4x0

[soundmanbe]

Hi,

With the upgrade on mageia 5, I lost the sound on my laptop.
After new full installation of mageia 5, it's the same.

Pulseaudio is running and pavucontrol shows modulation.... but no output sound.
(All output levels are at 100%)
Audio card SB4x0 on aspire 5040 laptop
Any suggestion?

BR

[doktor5000]

What desktop environment do you use? What is selected as primary output?

Please show the output as normal user of

Code: Select all

systemctl --user status pulseaudio.socket pulseaudio.service
pulseaudio --check
pactl stat
getfacl /dev/snd/*
pactl list cards
pacmd list-sinks

[soundmanbe]

Hi,
The desktop

Code: Select all

$ cat /etc/issue
Mageia release 5 (Official) for x86_64
Kernel 3.19.8-desktop-3.mga5 on a x86_64 / \l


Primary output is Internal analog stereo output
Here under the requested actions.

Code: Select all

$ systemctl --user status pulseaudio.socket pulseaudio.service
● pulseaudio.socket - Sound System
   Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; static)
   Active: active (running) since dim. 2015-09-06 11:04:11 CEST; 2min 41s ago
   Listen: /run/user/500/pulse/native (Stream)

● pulseaudio.service - Sound Service
   Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; disabled)
   Active: active (running) since dim. 2015-09-06 11:04:49 CEST; 2min 3s ago
 Main PID: 3098 (pulseaudio)
   CGroup: /user.slice/user-500.slice/user@500.service/pulseaudio.service
           └─3098 /usr/bin/pulseaudio


Nothing for pulseaudio --check

Code: Select all

$ pactl stat
En cours d'utilisation : 1 blocs contenant au total 63,9 Kio octets.
Alloué pendant l'ensemble de la durée d'exécution : 141 blocs contenant au total 7,3 Mio octets.
Taille du cache de l'échantillon : 0 B
Server String: /run/user/500/pulse/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 10
Tile Size: 65472
User Name: anne
Host Name: localhost
Server Name: pulseaudio
Server Version: 5.0.0-6.mga5
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_14.2.analog-stereo
Default Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
Cookie: 15dc:c628


Code: Select all

$ getfacl /dev/snd/*
getfacl : suppression du premier « / » des noms de chemins absolus
# file: dev/snd/by-path
# owner: root
# group: root
user::rwx
group::r-x
other::r-x

# file: dev/snd/controlC0
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/hwC0D1
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/hwC0D3
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/pcmC0D0c
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/pcmC0D0p
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/pcmC0D1p
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/seq
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---

# file: dev/snd/timer
# owner: root
# group: audio
user::rw-
user:anne:rw-
group::rw-
mask::rw-
other::---



Code: Select all

$ pactl list cards
Carte #0
        Nom : alsa_card.pci-0000_00_14.2
        Pilote : module-alsa-card.c
        Module propriétaire : 6
        Propriétés :
                alsa.card = "0"
                alsa.card_name = "HDA ATI SB"
                alsa.long_card_name = "HDA ATI SB at 0xc0000000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "437b"
                device.product.name = "IXP SB4x0 High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Audio interne"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profils :
                input:analog-stereo: Stéréo analogique Input (sinks: 0, sources: 1, priority: 60, available: yes)
                output:analog-stereo: Stéréo analogique Output (sinks: 1, sources: 0, priority: 6000, available: yes)
                output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (sinks: 1, sources: 1, priority: 6060, available: yes)
                output:iec958-stereo: Stéréo numérique (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:iec958-stereo+input:analog-stereo: Stéréo numérique (IEC958) Output + Stéréo analogique Input (sinks: 1, sources: 1, priority: 5560, available: yes)
                off: Éteint (sinks: 0, sources: 0, priority: 0, available: yes)
        Profil actif : output:analog-stereo+input:analog-stereo
        Ports :
                analog-input-internal-mic: Microphone interne (priority: 8900, latency offset: 0 usec)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo


Code: Select all

pacmd list-sinks
1 sink(s) available.
  * index: 0
        name: <alsa_output.pci-0000_00_14.2.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9959
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 0
        sample spec: s16le 2ch 48000Hz
        channel map: front-left,front-right
                     Stéréo
        used by: 0
        linked by: 0
        configured latency: 0,00 ms; range is 0,50 .. 1837,33 ms
        card: 0 <alsa_card.pci-0000_00_14.2>
        module: 6
        properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC883 Analog"
                alsa.id = "ALC883 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA ATI SB"
                alsa.long_card_name = "HDA ATI SB at 0xc0000000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "437b"
                device.product.name = "IXP SB4x0 High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352768"
                device.buffering.fragment_size = "176384"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Stéréo analogique"
                device.description = "Audio interne Stéréo analogique"
                alsa.mixer_name = "Realtek ALC883"
                alsa.components = "HDA:14f12bfa,10250080,00090000 HDA:10ec0883,00801235,00100002"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        ports:
                analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: unknown)
                        properties:

        active port: <analog-output-lineout>


[doktor5000]

You're missing what desktop you're using, you only showed the Mageia release. Do you use KDE, GNOME, MATE, ... ?
Apart from that, looks all good. You only seem to be having one soundcard.

Can you please run pavucontrol and post a screenshot of the "output devices" tab and the "configuration" tab when sound is currently playing?

[soundmanbe]

Sorry, I erased the desktop information by mistake, it's KDE
It's because everything looks normal .... without sound ...(in the speakers, line output jack and phone jack) that I post this problem ...

[soundmanbe]

Is it normal that the sound configuration in CCM doesn't propose any pilote's choice ? The pilote line doesn't appear.
Sound card SB4x0 = alc883 . (same without pulseaudio selected)

[doktor5000]

Is it normal that the sound configuration in CCM doesn't propose any pilote's choice ? The pilote line doesn't appear.
Sound card SB4x0 = alc883 . (same without pulseaudio selected)

Pilote means driver, right? Yes that is normal, as there's only snd_hda_intel driver for all newer HDA sound chips, there's no alternative driver you could select.

And for the screenshots, this one

suggests that nothing is plugged in to your line-out jack ... maybe you used the wrong jack?
Or jack detection doesn't work ...

And FWIW, when posting output or screenshots, it's helpful if you prefix the commands by LC_ALL=C so they show in english
E.g. for pavucontrol would be

Code: Select all

LC_ALL=C pavucontrol

- but doesn't matter that much now, I understood the important stuff.

[doktor5000]

Can you please show the output of

Code: Select all

LC_ALL=C pactl list modules | grep device-manager
grep -i codec /proc/asound/card*/codec*
lspcidrake -v | grep -i audio

[soundmanbe]

Thank's for the LC_ALL=C command, I didn't know it.

LC_ALL=C pactl list modules | grep device-manager : Nothing

Code: Select all

$ grep -i codec /proc/asound/card*/codec*
/proc/asound/card0/codec#1:Codec: Conexant ID 2bfa
/proc/asound/card0/codec#3:Codec: Realtek ALC883

Code: Select all

snd_hda_intel   : Advanced Micro Devices, Inc. [AMD/ATI]|IXP SB4x0 High Definition Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:1002 device:437b subv:1025 subd:0080) (rev: 01)


[doktor5000]

LC_ALL=C pactl list modules | grep device-manager : Nothing

That's your problem. It's the pulse module that interfaces with the KDE (and GNOME) device manager and mixer.
You can load it via

Code: Select all

/usr/bin/pactl load-module module-device-manager "do_routing=1"

which is usually done by /usr/bin/start-pulseaudio-x11
which is run on every X start via either /etc/xdg/autostart/pulseaudio.desktop or /etc/X11/xinit.d/50pulseaudio for more exotic desktops that don't know XDG autostart.

Please show the output as normal user of

Code: Select all

echo $KDE_FULL_SESSION

[soundmanbe]

I did :

Code: Select all

$ /usr/bin/pactl load-module module-device-manager "do_routing=1"
19

Try again

Code: Select all

$ LC_ALL=C pactl list modules | grep device-manager
        Name: module-device-manager

Still no sound.

urpme pulseaudio-module-x11;
urpmi pulseaudio-module-x11;
restart the laptop.
Now the command allways shows :

Code: Select all

$ LC_ALL=C pactl list modules | grep device-manager
        Name: module-device-manager

Module is loaded.
But still no sound.

Your asked code :

Code: Select all

$ echo $KDE_FULL_SESSION
true


Thank's for your time.

[doktor5000]

Hmm, could you try right-clicking on kmix in the system tray and select "select master channel". What's selectable there and what is selected for "playback devices"?

Also the same if you right-click on kmix and choose audio setup. Is the playback stuff all set to your current soundcard?
And if you change to the "audio hardware setup" tab, can you attach screenshot here please? Do you hear any sound if you click the
buttons in the "speaker placement and testing" section?

Alternatively, please create a new user and try with that one. Still no sound?

[soundmanbe]

There is no sound at all (same when I try the test sound and L/R speakers etc ...)
I allready had test all the possibilities before the post.

Here are the results for Kmix : ( if you need some translation, just ask)

master.jpeg (18.91 KiB) Viewed 4289 times

There is something strange with the Audio pref (first tab). If I select the sound card (internal Analogic audio) and push on test ... nothing, if I select a second time the same sound card and run test again, an error appear : "Impossible to select the Audio card".

AudioSetup.jpeg (83.66 KiB) Viewed 4289 times

All the problems still the same with a new user.

[soundmanbe]

No more suggestion ?

[doktor5000]

You could try a LiveDVD to check out if you get sound there. Otherwise it might be an issue of the kernel module and you may need to add some option for a proper codec detection

Or check the mixer channels. Run alsamixer as normal user, press F6 to see all mixer channels and check if there are some that are muted (showing as [MM] below the scale)
or maybe attach a screenshot of that here. You could also use

Code: Select all

amixer -c 0

to get the text form of that.

Please also show the output as root of

Code: Select all

journalctl -ab | grep -i hda