I have a brand new Huawei B593S 4G router with WIFI & LAN. When I connected the wifi at first, it worked fine with my linux machines (Mageia 4 on laptop and Mageia 4 (64bit) on tabletop WS), but out of the blue it just stopped working. I use Zyxel NWD2205 wireless USB adapter and as said, it worked fine in the beginning (two days ago). And it also keeps working fine on my windows 8.1 (dual boot on the tabletop PC). I did not do anything (not even any updates - IIRC) and it just stopped working.
My Mageia WSs cannot connect to my network - unless I take all protection down. With open connetion I can connect through wifi to the B593S router. But even with WEP protection - nothing. And I always use WPA2 protection.
No difference if I broadcast SSID or not.
I also tried with my Buffalo USB (tiny) wifi adapter, but the same issue: cannot connect to my network router.
The network is working and I have internet access if I connect with my LAN cable & powerline adapter (ethernet over powerline). But for some reason that line is less what I get over wifi (now only in Windows 8.1)...
To me this seems to be a problem with Mageia. I don't have any other distro at home, so cannot test any other distros.
I tried searching the forum and in general over the internet for a solution, but could not find any. I would appreciate if someone could give me a hand! Thanks!
Cannot connect to Huawei B593S wifi
32 posts
• Page 1 of 2 • 1, 2
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 16th, '15, 22:05
Your best bet: remove the wireless connections completely, and switch to networkmanager.
To remove the old wireless connection, do the following as root
I've described how to switch from Mageia's default net_applet to networkmanager here: viewtopic.php?f=25&t=5782
To remove the old wireless connection, do the following as root
- Code: Select all
drakconnect --del => select all your wireless connections to remove them
rm -f /etc/sysconfig/network-scripts/wireless.d/*
systemctl stop wpa_supplicant.service
mv /etc/wpa_supplicant.conf /etc/wpa_supplicant.backup
rpm -e --nodeps wpa_supplicant
urpmi wpa_supplicant
I've described how to switch from Mageia's default net_applet to networkmanager here: viewtopic.php?f=25&t=5782
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 16th, '15, 22:14
Thanks Doc, I'll try that tomorrow! Seems simple enough. I'll post back once I've done that.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 16th, '15, 22:18
In case any questions come up, just let me know.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 17th, '15, 17:24
OK, sorry, but I must ask... It wasn't as easy as I thought it might be (for me).
In your command list above a few questions:
1) I removed all wireless connections - not the wired one (eth). Was this correct?
2) The line second to last I uninstall the wpa_supplicant, but on the last line I install it again. Why do that?
And then I installed networkmanager and networkmanager-applet. OK. but then you state that the service should be first started and then stopped. And I have also net_applet is set NOT to autostart
Now, how do I start the connection (the wired is all the time operating - how do I start the wireless)?
In your command list above a few questions:
1) I removed all wireless connections - not the wired one (eth). Was this correct?
2) The line second to last I uninstall the wpa_supplicant, but on the last line I install it again. Why do that?
And then I installed networkmanager and networkmanager-applet. OK. but then you state that the service should be first started and then stopped. And I have also net_applet is set NOT to autostart
- Code: Select all
$ cat ~/.net_applet
AUTOSTART=FALSE
Now, how do I start the connection (the wired is all the time operating - how do I start the wireless)?
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 18th, '15, 00:28
dude67 wrote:1) I removed all wireless connections - not the wired one (eth). Was this correct?
Exactly.
dude67 wrote:2) The line second to last I uninstall the wpa_supplicant, but on the last line I install it again. Why do that?[/code]
As the /etc/wpa_supplicant.conf is marked as a configuration file in the rpm, a simple reinstallation via urpmi --replacefiles --replacepkgs wpa_supplicant would not generate a clean config file, it would stay like it is.
This file contained the wireless keys and SSID of the networks that you have connected to, and this way is the easiest to start fresh there.
Your old credentials have been backed up to /etc/wpa_supplicant.backupdude67 wrote:And then I installed networkmanager and networkmanager-applet. OK. but then you state that the service should be first started and then stopped. And I have also net_applet is set NOT to autostart
- Code: Select all
$ cat ~/.net_applet
AUTOSTART=FALSE
Now, how do I start the connection (the wired is all the time operating - how do I start the wireless)?
Yeah right that part is a bit confusingly written, sorry. Basically when net_applet would be still running and you start networkmanager,
you can manage the connection for a few minutes with networkmanager, then it will stop to work as net_applet and networkmanager will be in conflict.
For the wireless connection, you need to create that via the network manager applet. You may need to start the applet, it is called nm-applet and looks like this
on left-click (leftmost icon in systray)
- Bildschirmfoto2_147.png (36.43 KiB) Viewed 9388 times
Either select your network where the available ones are listed (all available ones should be listed) or at the bottom there's '"Create New Wifi Network".
As I'm using KDE, the KDE plasmoid (plasma-applet-nm) for this looks a bit differently:
- Bildschirmfoto2_146.png (38.87 KiB) Viewed 9388 times
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 18th, '15, 13:27
Oh, thanks! That applet looks nice. I must try this soon, but first I have to clean my system as the /var has become full and it's not stable anymore.
I'll let you know how it goes with NM.
I'll let you know how it goes with NM.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 18th, '15, 16:49
Yes, I think I got it now! One thing though, how do I start the plasma-applet-nm? I seem to be unable to do it automatically. I can open it though console by
But then it closes if I close the console.
- Code: Select all
$ nm-applet
But then it closes if I close the console.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 18th, '15, 21:44
You mixed them up 
plasma-applet-nm is the second screenshot in my post and meant for KDE.
To enable it, right-click on the systray => system tray settings => and at the bottom in the section "additional elements" tick the box for "networkmanagement", and it will appear in the systray.
You can also have it as standalone applet anywhere in the control panel or on the desktop via the usual "add plasmoid" dialog.
For nm-applet, if you want to let it autostart in KDE, you need to change something in the autostart file, as it will not be loaded by default in KDE. As root run
But under KDE that looks pretty ugly, the other one integrates much nicer and looks better.
plasma-applet-nm is the second screenshot in my post and meant for KDE.To enable it, right-click on the systray => system tray settings => and at the bottom in the section "additional elements" tick the box for "networkmanagement", and it will appear in the systray.
You can also have it as standalone applet anywhere in the control panel or on the desktop via the usual "add plasmoid" dialog.
For nm-applet, if you want to let it autostart in KDE, you need to change something in the autostart file, as it will not be loaded by default in KDE. As root run
- Code: Select all
desktop-file-edit --remove-not-show-in=KDE /etc/xdg/autostart/nm-applet.desktop
But under KDE that looks pretty ugly, the other one integrates much nicer and looks better.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 19th, '15, 18:10
Thanks Doc, I got that applet issue now settled...
But I still have a problem with that connection! It will not give me enough speed - and sometimes it seems to refuse connection entirely (not connected). Currently I get around 0.5 Mbps wirelessly while with the same hw in Windows 8.1 I get 40 to 50 Mbps... So there is still something wrong.
Any idea where to look?
But I still have a problem with that connection! It will not give me enough speed - and sometimes it seems to refuse connection entirely (not connected). Currently I get around 0.5 Mbps wirelessly while with the same hw in Windows 8.1 I get 40 to 50 Mbps... So there is still something wrong.
Any idea where to look?
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 19th, '15, 19:02
Please show the output as root of
- Code: Select all
ps -ef | grep -v grep | grep -ie net -e wpa
lspcidrake -v
iwconfig
ifconfig -a
systemctl status network.service -a
journalctl -ab | grep -iE "fw|firmware|iwl|wifi|wire|80211"
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 19th, '15, 21:47
Here's all of that in one output
- Code: Select all
# ps -ef | grep -v grep | grep -ie net -e wpa
root 24 2 0 16:47 ? 00:00:00 [netns]
root 1450 1 0 17:57 ? 00:00:00 /usr/sbin/wpa_supplicant -u -f /var/log/wpa_supplicant.log -c /etc/wpa_supplicant.conf -P /run/wpa_supplicant.pid
root 2504 1 0 18:00 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
root 25264 2504 0 20:05 ? 00:00:00 /sbin/dhclient -d -sf /usr/libexec/nm-dhcp-client.action -pf /var/run/dhclient-wlp0s20u12.pid -lf /var/lib/NetworkManager/dhclient-8be308bb-55b2-44fd-b3c9-22a97c11505c-wlp0s20u12.lease -cf /var/lib/NetworkManager/dhclient-wlp0s20u12.conf wlp0s20u12
[root@localhost ~]# lspcidrake -v
unknown : ASMedia Technology Inc.|ASM1083/1085 PCIe to PCI Bridge [BRIDGE_PCI] (vendor:1b21 device:1080) (rev: 03)
r8169 : Realtek Semiconductor Co., Ltd.|RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [NETWORK_ETHERNET] (vendor:10ec device:8168 subv:1043 subd:859e) (rev: 11)
snd_hda_intel : NVIDIA Corporation|GK104 HDMI Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:10de device:0e0a subv:1043 subd:8465) (rev: a1)
Card:NVIDIA GeForce 400 series and later: NVIDIA Corporation|GK104 [GeForce GTX 770] [DISPLAY_VGA] (vendor:10de device:1184 subv:1043 subd:8465) (rev: a1)
i2c_i801 : Intel Corporation|8 Series/C220 Series Chipset Family SMBus Controller [SERIAL_SMBUS] (vendor:8086 device:8c22 subv:1043 subd:8534) (rev: 05)
unknown : Intel Corporation|8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [STORAGE_SATA] (vendor:8086 device:8c02 subv:1043 subd:8534) (rev: 05)
lpc_ich : Intel Corporation|Z87 Express LPC Controller [BRIDGE_ISA] (vendor:8086 device:8c44 subv:1043 subd:8534) (rev: 05)
ehci_pci : Intel Corporation|8 Series/C220 Series Chipset Family USB EHCI #1 [SERIAL_USB] (vendor:8086 device:8c26 subv:1043 subd:8534) (rev: 05)
unknown : Intel Corporation|82801 PCI Bridge [BRIDGE_PCI] (vendor:8086 device:244e) (rev: d5)
shpchp : Intel Corporation|8 Series/C220 Series Chipset Family PCI Express Root Port #3 [BRIDGE_PCI] (vendor:8086 device:8c14) (rev: d5)
shpchp : Intel Corporation|8 Series/C220 Series Chipset Family PCI Express Root Port #1 [BRIDGE_PCI] (vendor:8086 device:8c10) (rev: d5)
snd_hda_intel : Intel Corporation|8 Series/C220 Series Chipset High Definition Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:8c20 subv:1043 subd:8576) (rev: 05)
ehci_pci : Intel Corporation|8 Series/C220 Series Chipset Family USB EHCI #2 [SERIAL_USB] (vendor:8086 device:8c2d subv:1043 subd:8534) (rev: 05)
mei_me : Intel Corporation|8 Series/C220 Series Chipset Family MEI Controller #1 [COMMUNICATION_OTHER] (vendor:8086 device:8c3a subv:1043 subd:8534) (rev: 04)
xhci_hcd : Intel Corporation|8 Series/C220 Series Chipset Family USB xHCI [SERIAL_USB] (vendor:8086 device:8c31 subv:1043 subd:8534) (rev: 05)
shpchp : Intel Corporation|Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [BRIDGE_PCI] (vendor:8086 device:0c01) (rev: 06)
unknown : Intel Corporation|4th Gen Core Processor DRAM Controller [BRIDGE_HOST] (vendor:8086 device:0c00 subv:1043 subd:8534) (rev: 06)
hub : Linux 3.14.32-desktop-1.mga4 xhci_hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0003)
usb_storage : Seagate|Expansion Desk [Mass Storage|SCSI|Bulk-Only] (vendor:0bc2 device:3321)
usb_storage : Kingston|USB3.0 Media Reader [Mass Storage|SCSI|Bulk-Only] (vendor:11b0 device:6348)
hub : Linux 3.14.32-desktop-1.mga4 xhci_hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
hub : Genesys Logic, Inc.|USB2.0 Hub [Hub|Unused|Full speed (or root) hub] (vendor:05e3 device:0606)
usbhid : Lite-On Technology Corp.|HP Basic USB Keyboard [Human Interface Device|Boot Interface Subclass|Keyboard] (vendor:03f0 device:0324)
usbhid : MOSART Semi.|2.4G Keyboard Mouse [Human Interface Device|Boot Interface Subclass|Keyboard] (vendor:062a device:4101)
rtl8192cu : Realtek|802.11n WLAN Adapter (vendor:0586 device:341f)
usbhid : Corsair Memory, Inc.|Integrated USB Bridge [Human Interface Device|No Subclass|None] (vendor:1b1c device:0c04)
hub : Linux 3.14.32-desktop-1.mga4 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
hub : Intel Corp.|Unknown [Hub|Unused|Full speed (or root) hub] (vendor:8087 device:8000)
hub : Linux 3.14.32-desktop-1.mga4 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
hub : Intel Corp.|Unknown [Hub|Unused|Full speed (or root) hub] (vendor:8087 device:8008)
hid_generic : Corsair Memory, Inc. Integrated USB Bridge
hid_generic : Lite-On Technology Corp. HP Basic USB Keyboard
hid_generic : MOSART Semi. 2.4G Keyboard Mouse
hid_generic : MOSART Semi. 2.4G Keyboard Mouse
[root@localhost ~]# iwconfig
enp3s0 no wireless extensions.
wlp0s20u12 IEEE 802.11bgn ESSID:"Linux"
Mode:Managed Frequency:2.412 GHz Access Point: 1E:8E:5C:F5:E1:18
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=65/70 Signal level=-45 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:5 Missed beacon:0
lo no wireless extensions.
[root@localhost ~]# ifconfig -a
enp3s0 Link encap:Ethernet HWaddr BC:EE:7B:5F:8A:15
inet6 addr: fe80::beee:7bff:fe5f:8a15/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:179849 errors:0 dropped:0 overruns:0 frame:0
TX packets:137344 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:197274463 (188.1 MiB) TX bytes:82508830 (78.6 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:11009 errors:0 dropped:0 overruns:0 frame:0
TX packets:11009 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:704520 (688.0 KiB) TX bytes:704520 (688.0 KiB)
wlp0s20u12 Link encap:Ethernet HWaddr 10:7B:EF:CC:58:49
inet addr:192.168.100.10 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::127b:efff:fecc:5849/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:47196 errors:0 dropped:0 overruns:0 frame:0
TX packets:92560 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53395060 (50.9 MiB) TX bytes:60748645 (57.9 MiB)
[root@localhost ~]# systemctl status network.service -a
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed (Result: exit-code) since Thu 2015-03-19 16:47:18 EET; 3h 20min ago
Mar 19 16:47:18 localhost.localdomain network[968]: Configuring wireless regulatory domain [ OK ]
Mar 19 16:47:18 localhost.localdomain network[968]: Bringing up interface enp3s0: Error: Connection activation failed: Device not managed by NetworkManager or unavailable
Mar 19 16:47:18 localhost.localdomain network[968]: [FAILED]
Mar 19 16:47:18 localhost.localdomain network[968]: Bringing up interface wlp0s20u11: Error: Connection activation failed: Device not managed by NetworkManager or unavailable
Mar 19 16:47:18 localhost.localdomain network[968]: [FAILED]
Mar 19 16:47:18 localhost.localdomain network[968]: Bringing up interface wlp0s20u12: ./ifup: interface ifcfg-wlp0s20u12 is controlled by NetworkManager; skipping.
Mar 19 16:47:18 localhost.localdomain network[968]: [ OK ]
Mar 19 16:47:18 localhost.localdomain systemd[1]: network.service: control process exited, code=exited status=1
Mar 19 16:47:18 localhost.localdomain systemd[1]: Failed to start LSB: Bring up/down networking.
Mar 19 16:47:18 localhost.localdomain systemd[1]: Unit network.service entered failed state.
[root@localhost ~]# journalctl -ab | grep -iE "fw|firmware|iwl|wifi|wire|80211"
Mar 19 16:47:13 localhost.localdomain kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
Mar 19 16:47:15 localhost.localdomain kernel: ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
Mar 19 16:47:15 localhost.localdomain kernel: rtlwifi: wireless switch is on
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 16:47:15 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 16:47:17 localhost.localdomain NetworkManager[847]: <info> monitoring kernel firmware directory '/lib/firmware'.
Mar 19 16:47:17 localhost.localdomain NetworkManager[847]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/ieee80211/phy0/rfkill0) (driver rtl8192cu)
Mar 19 16:47:17 localhost.localdomain NetworkManager[847]: <info> WiFi hardware radio set enabled
Mar 19 16:47:17 localhost.localdomain NetworkManager[847]: <info> WiFi enabled by radio killswitch; enabled by state file
Mar 19 16:47:17 localhost.localdomain NetworkManager[847]: <info> (wlp0s20u12): using nl80211 for WiFi device control
Mar 19 16:47:17 localhost.localdomain NetworkManager[847]: <info> (wlp0s20u12): new 802.11 WiFi device (driver: 'rtl8192cu' ifindex: 3)
Mar 19 16:47:18 localhost.localdomain network[968]: Configuring wireless regulatory domain [ OK ]
Mar 19 16:47:19 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 16:47:19 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 16:47:23 localhost.localdomain kernel: IFWLOG: register target
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:04:29 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:04:33 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 17:04:33 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:04:34 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:05:54 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:05:54 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:05:55 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Linux'.
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:07:53 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:08:06 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 17:08:06 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:08:07 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:11:47 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:15:02 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'Linux' has security, but secrets are required.
Mar 19 17:15:03 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:15:03 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Linux'.
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:16:19 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:16:19 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 17:16:19 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:16:20 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:21:27 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:21:29 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:21:30 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 17:23:10 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: changed mode of /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b to 700
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: written interface configuration in /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/own_wifi
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/own_wifi
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: changed mode of /etc/sysconfig/network-scripts/wireless.d/own_wifi to 700
Mar 19 17:25:46 localhost.localdomain draknetcenter[21585]: written interface configuration in /etc/sysconfig/network-scripts/wireless.d/own_wifi
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: changed mode of /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b to 700
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: written interface configuration in /etc/sysconfig/network-scripts/wireless.d/1c:8e:5c:f5:e1:1b
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/own_wifi
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: modified file /etc/sysconfig/network-scripts/wireless.d/own_wifi
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: changed mode of /etc/sysconfig/network-scripts/wireless.d/own_wifi to 700
Mar 19 17:26:36 localhost.localdomain draknetcenter[21585]: written interface configuration in /etc/sysconfig/network-scripts/wireless.d/own_wifi
Mar 19 17:29:31 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:29:57 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:30:37 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:31:03 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:31:06 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'Linux' has security, but secrets are required.
Mar 19 17:31:06 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:31:31 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:31:34 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'Linux' has security, but secrets are required.
Mar 19 17:31:34 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:31:53 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 17:31:53 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:32:19 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:32:22 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:32:47 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:32:50 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'Linux' has security, but secrets are required.
Mar 19 17:32:50 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:33:15 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:33:18 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'Linux' has security, but secrets are required.
Mar 19 17:33:18 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:35:05 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:35:31 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:42:51 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 17:42:51 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:43:16 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:49:00 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 17:49:00 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 17:49:25 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 17:49:45 localhost.localdomain NetworkManager[847]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 17:50:11 localhost.localdomain NetworkManager[847]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 19 18:00:27 localhost.localdomain NetworkManager[2504]: <info> monitoring kernel firmware directory '/lib/firmware'.
Mar 19 18:00:27 localhost.localdomain NetworkManager[2504]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/ieee80211/phy0/rfkill0) (driver rtl8192cu)
Mar 19 18:00:27 localhost.localdomain NetworkManager[2504]: <info> WiFi hardware radio set enabled
Mar 19 18:00:27 localhost.localdomain NetworkManager[2504]: <info> WiFi enabled by radio killswitch; enabled by state file
Mar 19 18:00:27 localhost.localdomain NetworkManager[2504]: <info> (wlp0s20u12): using nl80211 for WiFi device control
Mar 19 18:00:27 localhost.localdomain NetworkManager[2504]: <info> (wlp0s20u12): new 802.11 WiFi device (driver: 'rtl8192cu' ifindex: 3)
Mar 19 18:00:46 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 18:00:47 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 18:13:17 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 18:13:20 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 18:13:20 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 18:13:21 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 18:14:27 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 20:02:18 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless): access point 'own_wifi' has security, but secrets are required.
Mar 19 20:02:18 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless): connection 'own_wifi' has security, and secrets exist. No new secrets needed.
Mar 19 20:02:19 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'own_wifi'.
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: World regulatory domain updated:
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: Calling CRDA for country: US
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: Regulatory domain changed to country: US
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: DFS Master region: unset
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Mar 19 20:05:14 localhost.localdomain kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mar 19 20:05:34 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless): connection 'Linux' has security, and secrets exist. No new secrets needed.
Mar 19 20:05:35 localhost.localdomain NetworkManager[2504]: <info> Activation (wlp0s20u12/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Linux'.
[root@localhost ~]#
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 19th, '15, 23:03
Link quality and the rest looks pretty good.
Can you show the output as root of
You might also try to connect the usb adapter via an usb extension cable, worth a try.
Can you show the output as root of
- Code: Select all
modinfo rtl8192cu
You might also try to connect the usb adapter via an usb extension cable, worth a try.
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 20th, '15, 16:17
Yes, here's the output. To me it looks a bit strange...
- Code: Select all
# modinfo rtl8192cu
filename: /lib/modules/3.14.32-desktop-1.mga4/kernel/drivers/net/wireless/rtlwifi/rtl8192cu/rtl8192cu.ko.xz
firmware: rtlwifi/rtl8192cufw_TMSC.bin
firmware: rtlwifi/rtl8192cufw_B.bin
firmware: rtlwifi/rtl8192cufw_A.bin
firmware: rtlwifi/rtl8192cufw.bin
description: Realtek 8192C/8188C 802.11n USB wireless
license: GPL
author: Larry Finger <Larry.Finger@lwfinger.net>
author: Ziv Huang <ziv_huang@realtek.com>
author: Georgia <georgia@realtek.com>
srcversion: FD63D621B8E661B1BF9B8BF
alias: usb:v7392p7822d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2357p0100d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v20F4p624Dd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB2Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p330Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3309d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3307d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0E66p0019d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0061d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8186d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0B05p17ABd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846pF001d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p9021d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p8178d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07AAp0056d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0586p341Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp2103d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp2102d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp1004d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019p1201d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFFCd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFFBd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFF8d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFFAd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFF9d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v04F2pAFF7d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp317Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v9846p9041d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v4855p0091d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v4855p0090d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13D3p3359d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13D3p3358d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v7392p7811d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v20F4p648Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pED17d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB2Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019pAB2Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2019p4902d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3308d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13D3p3357d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v103Cp1629d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v4856p0091d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0EB0p9071d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0077d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0070d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p005Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DF6p0052d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp5088d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p9041d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p8189d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07B8p8188d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v06F8pE033d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp11F2d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp1102d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8178d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8754d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp819Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp818Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Fd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Dd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp817Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8177d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8176d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8170d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp018Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BDAp8191d*dc*dsc*dp*ic*isc*ip*in*
depends: rtlwifi,rtl8192c-common,rtl_usb,usbcore,mac80211
intree: Y
vermagic: 3.14.32-desktop-1.mga4 SMP mod_unload modversions
parm: swenc:Set to 1 for software crypto (default 0)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
doktor5000 wrote:You might also try to connect the usb adapter via an usb extension cable, worth a try.
Currently it's attached with a short stiff usb ext cable it came with. I can try without, but now I get over 50 Mbps with this! I don't understand. But even now, if started to cut the traffic, but then I got the over 50 Mbps back.
Now it just stopped working and I had to switch back to eth connection.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 20th, '15, 21:43
doktor5000 wrote:You might also try to connect the usb adapter via an usb extension cable, worth a try.
I tried without anything and with a different extension cable. No help there.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 20th, '15, 22:06
dude67 wrote:Yes, here's the output. To me it looks a bit strange...
- Code: Select all
# modinfo rtl8192cu
[...]
parm: swenc:Set to 1 for software crypto (default 0)
Actually looks pretty normal. The above option is what I was looking for. Can you try to unload the module and reload it, and enable software crypto
- Code: Select all
modprobe -rf rtl8192cu; modprobe rtl8192cu swenc=1
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 20th, '15, 22:33
OK, I did these two. It didn't work for the current session. I rebooted the whole thing and it started to work. But as always, the connection seems to be fading all the time... Currently my laptop (running Mageia 4 32bit) is getting 45 Mbps sitting right next to the PC, that is getting now 28 Mbps. And getting worse all the time.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 20th, '15, 22:41
And now that connection died totally givin no connection at all. I tried changing to another wireless network that this Huawei can give, and that worked. But again, for how long.
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 20th, '15, 23:45
Now this is weird... I connect one of the two wifi networks created by this Huawei and it works for awhile. Then the connection is cut. I change to the other SSID and that works fine. Until it stops again soon and I swap that connection back to the first one. And like magic (yes, it's Mageia) it works now. For a short while. But then it stops working.
So that got me thinking: what if the problem is with the two separate wifi networks this Huawei is creating. So I booted to Windows (the huawei web maintenance page does not work from Linux...) and turned one of the two networks off - just to test the theory. But I guess it's not that as the first thing I tested when I got back to Mageia was the speed. Depressing 7 Mbps... Still the ping is good (16ms) and the upload is good at 24 Mbps, but the download is something like 7Mbps (or worse)! And then that died and I had to move back to eth to be able to post this.
I don't get it...
So that got me thinking: what if the problem is with the two separate wifi networks this Huawei is creating. So I booted to Windows (the huawei web maintenance page does not work from Linux...) and turned one of the two networks off - just to test the theory. But I guess it's not that as the first thing I tested when I got back to Mageia was the speed. Depressing 7 Mbps... Still the ping is good (16ms) and the upload is good at 24 Mbps, but the download is something like 7Mbps (or worse)! And then that died and I had to move back to eth to be able to post this.
I don't get it...
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 21st, '15, 15:59
I don't seem to get any wireless connection even though I've enabled it and tried to connect to it.
- Code: Select all
[root@localhost ~]# iwconfig
enp3s0 no wireless extensions.
wlp0s20u12 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
lo no wireless extensions.
[root@localhost ~]#
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 21st, '15, 21:52
You often mention the bitrate, that is not really relevant as your actual transfer speeds will be magnitudes slower then the nominal connection bitrate.
Do you only use the connection bitrate to determine link quality? And for the ping you mentioned, what do you ping?
To watch the signal level, you can run as root
Although those statistics are often unreliable, depending on driver and chipset.
For the lost connection, can you show the output as root of
Do you only use the connection bitrate to determine link quality? And for the ping you mentioned, what do you ping?
To watch the signal level, you can run as root
- Code: Select all
watch -n 1 cat /proc/net/wireless
Although those statistics are often unreliable, depending on driver and chipset.
For the lost connection, can you show the output as root of
- Code: Select all
journalctl -b -u NetworkManager --no-pager
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 21st, '15, 23:01
I measure the connection to internet by speedtest.net. That is a very good indicator to whether I have a working network or not. Since that is operational all the time and gets that 50 Mbps connection out (I'm watching IPTV through that connection). When the speed is decreasing it is not working properly and soon will reach nil. And the connection to my router is lost.
I put the wireless watch on as you suggested, but it's not giving me any numbers at all - I cannot get wireless connection to my router.
Here's the output you ask. I didn't print all of it as it was a lot of that same from a long time back. Let me know if there's something special you are looking for in that code. I'm using WPA2-PSK with non-hidden SSID.
I put the wireless watch on as you suggested, but it's not giving me any numbers at all - I cannot get wireless connection to my router.
- Code: Select all
Every 1,0s: cat /proc/net/wireless Sat Mar 21 22:54:34 2015
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
Here's the output you ask. I didn't print all of it as it was a lot of that same from a long time back. Let me know if there's something special you are looking for in that code. I'm using WPA2-PSK with non-hidden SSID.
- Code: Select all
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Auto-activating connection 'newlinux'.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) starting connection 'newlinux'
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) scheduled...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) started...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) scheduled...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) complete.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) starting...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12/wireless): access point 'newlinux' has security, but secrets are required.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: config -> need-auth (reason 'none') [50 60 0]
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) complete.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) scheduled...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) started...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) scheduled...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) complete.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) starting...
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12/wireless): connection 'newlinux' has security, and secrets exist. No new secrets needed.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Config: added 'ssid' value 'newlinux'
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Config: added 'scan_ssid' value '1'
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Config: added 'psk' value '<omitted>'
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Config: added 'proto' value 'WPA RSN'
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) complete.
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> Config: set interface ap_scan to 1
Mar 21 22:40:31 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: inactive -> scanning
Mar 21 22:40:41 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: scanning -> authenticating
Mar 21 22:40:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: authenticating -> disconnected
Mar 21 22:40:56 localhost.localdomain NetworkManager[842]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 21 22:40:56 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: config -> failed (reason 'SSID not found') [50 120 53]
Mar 21 22:40:56 localhost.localdomain NetworkManager[842]: <warn> Activation (wlp0s20u12) failed for connection 'newlinux'
Mar 21 22:40:56 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: failed -> disconnected (reason 'none') [120 30 0]
Mar 21 22:40:56 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): deactivating device (reason 'none') [0]
Mar 21 22:40:56 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: disconnected -> inactive
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Auto-activating connection 'newlinux'.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) starting connection 'newlinux'
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) scheduled...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) started...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) scheduled...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) complete.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) starting...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12/wireless): access point 'newlinux' has security, but secrets are required.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: config -> need-auth (reason 'none') [50 60 0]
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) complete.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) scheduled...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) started...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) scheduled...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) complete.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) starting...
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12/wireless): connection 'newlinux' has security, and secrets exist. No new secrets needed.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Config: added 'ssid' value 'newlinux'
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Config: added 'scan_ssid' value '1'
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Config: added 'psk' value '<omitted>'
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Config: added 'proto' value 'WPA RSN'
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) complete.
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> Config: set interface ap_scan to 1
Mar 21 22:40:59 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: inactive -> scanning
Mar 21 22:41:09 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: scanning -> authenticating
Mar 21 22:41:14 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: authenticating -> disconnected
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <warn> Activation (wlp0s20u12/wireless): association took too long, failing activation.
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: config -> failed (reason 'SSID not found') [50 120 53]
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <info> Marking connection 'newlinux' invalid.
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <warn> Activation (wlp0s20u12) failed for connection 'newlinux'
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: failed -> disconnected (reason 'none') [120 30 0]
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): deactivating device (reason 'none') [0]
Mar 21 22:41:24 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: disconnected -> inactive
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) starting connection 'newlinux'
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) scheduled...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) started...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) scheduled...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) complete.
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) starting...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12/wireless): access point 'newlinux' has security, but secrets are required.
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: config -> need-auth (reason 'none') [50 60 0]
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) complete.
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) scheduled...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) started...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) scheduled...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 1 of 5 (Device Prepare) complete.
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) starting...
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12/wireless): connection 'newlinux' has security, and secrets exist. No new secrets needed.
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Config: added 'ssid' value 'newlinux'
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Config: added 'scan_ssid' value '1'
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Config: added 'psk' value '<omitted>'
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Config: added 'proto' value 'WPA RSN'
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Activation (wlp0s20u12) Stage 2 of 5 (Device Configure) complete.
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> Config: set interface ap_scan to 1
Mar 21 22:44:46 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: inactive -> scanning
Mar 21 22:44:56 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: scanning -> authenticating
Mar 21 22:45:01 localhost.localdomain NetworkManager[842]: <info> (wlp0s20u12): supplicant interface state: authenticating -> disconnected
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 22nd, '15, 10:07
Here's the link level and quality for wireless
Then shortly it just started to go worse. And here I can see that "missed beacon" got higher.
- Code: Select all
Every 1,0s: cat /proc/net/wireless Sun Mar 22 09:57:04 2015
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
wlp0s20u12: 0000 60. -50. -256 0 0 0 0 1 0
Then shortly it just started to go worse. And here I can see that "missed beacon" got higher.
- Code: Select all
Every 1,0s: cat /proc/net/wireless Sun Mar 22 10:06:01 2015
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
wlp0s20u12: 0000 64. -46. -256 0 0 0 0 44 0
- Code: Select all
Every 1,0s: cat /proc/net/wireless Sun Mar 22 10:06:47 2015
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
wlp0s20u12: 0000 65. -45. -256 0 0 0 0 75 0
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by dude67 » Mar 22nd, '15, 10:25
And when I totally lost connection
- Code: Select all
Every 1,0s: cat /proc/net/wireless Sun Mar 22 10:23:33 2015
Inter-| sta-| Quality | Discarded packets | Missed | WE
face | tus | link level noise | nwid crypt frag retry misc | beacon | 22
wlp0s20u12: 0000 62. -48. -256 0 0 0 0 258 0
-
dude67 - Posts: 61
- Joined: Jun 2nd, '11, 07:56
- Location: Finland
Re: Cannot connect to Huawei B593S wifi
by doktor5000 » Mar 22nd, '15, 12:04
Well, there's nothing out of the ordinary in the networkmanager logs. Can't help much further than that, this seems to be a driver/chipset problem.
The only other thing that comes to mind would be to use the proprietary driver from Realtek. Should be this one: http://www.realtek.com/downloads/downlo ... =true#2772
This is also mentioned here: http://www.linux-hardware-guide.com/201 ... er-802-11n and here: http://ubuntuforums.org/showthread.php?t=1780854
The only other thing that comes to mind would be to use the proprietary driver from Realtek. Should be this one: http://www.realtek.com/downloads/downlo ... =true#2772
This is also mentioned here: http://www.linux-hardware-guide.com/201 ... er-802-11n and here: http://ubuntuforums.org/showthread.php?t=1780854
Cauldron is not for the faint of heart!
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
Caution: Hot, bubbling magic inside. May explode or cook your kittens!
----
Disclaimer: Beware of allergic reactions in answer to unconstructive complaint-type posts
-
doktor5000 - Posts: 18052
- Joined: Jun 4th, '11, 10:10
- Location: Leipzig, Germany
32 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 1 guest