Canon MX420 Scanner mode

[mustelide]

Hello all,

I've a printer/scanner Canon MX420 plugged to a switch. I've use the assistant for the printer, but, fot the scanner, it don't find it.
I've the drivers (downloaded from canon site), but I don't know how to install them. I've an archive called scangearmp-mx420series-1.70-1-rpm.tar.gz, if I extract it, I will have a folder with a install.sh inside.
How can I install it properly, if possible by using this rpm

Thank's a lot

[doktor5000]

re-
install.sh tried, got this:

Code: Select all

[root@localhost Scanner Driver MX420]# ./install.sh
An error occurred. The package management system cannot be identified.
./install.sh: ligne 337 : [: = : opérateur unaire attendu
==================================================

ScanGear MP Ver.1.70-1 for Linux
Copyright CANON INC. 2007-2011
All Rights Reserved.

==================================================
Une erreur s'est produite. Impossible d'identifier le gestionnaire de paquets.
[root@localhost Scanner Driver MX420]#

Driver can be found here:
http://www.canon.fr/Support/Consumer_Products/products/Fax__Multifunctionals/InkJet/PIXMA_MX_series/PIXMA_MX420.aspx

Code: Select all

[root@localhost belette]# rpm -Uvh cnijfilter-mx420series-3\ 1.50-1-rpm
erreur : cnijfilter-mx420series-3 1.50-1-rpm : n'est pas un paquet rpm (ni une liste de paquet) :
[root@localhost belette]#

thx

[mustelide]

.deb transformed with alien, install done.
Now it's to acces to the device......

[doktor5000]

Please next time use code tags as explained in ftp://ftp5.gwdg.de/pub/linux/mandriva/m ... e_tags.ogv

[David_Batson]

Scangearmp is a program that runs from Konsole (aka Terminal) after you install the scangearmp rpm file. You might need to run it as root. When you start scangearmp from terminal, it launches a GUI app for scanning.

You might also find the following helpful (or confusing)

viewtopic.php?f=24&t=905

http://forums.fedoraforum.org/showthread.php?p=1584980

https://bbs.archlinux.org/viewtopic.php?id=129048

[mustelide]

Hello all

Sorry for the delay, nights works these days.
I've try a lot of thing, but nothing works, impossible to get this scanner by the ethernet. (for info, scanner of this printer can only be connected by usb)
For my secondary pc, I've reinstalled a Debian SID, no dependance and no lib missing during installation of these drivers (as the old one before)

Code: Select all

 
----------------   Debian logs ------------
# dpkg -i cnijfilter-common_3.50-1_amd64.deb
Selecting previously unselected package cnijfilter-common.
(Reading database ... 136443 files and directories currently installed.)
Unpacking cnijfilter-common (from cnijfilter-common_3.50-1_amd64.deb) ...
Setting up cnijfilter-common (3.50-1) ...
Processing triggers for libc-bin ...
root@debian:/home/belette/Downloads/printer# dpkg -i cnijfilter-mx420series_3.50-1_amd64.deb
Selecting previously unselected package cnijfilter-mx420series.
(Reading database ... 136459 files and directories currently installed.)
Unpacking cnijfilter-mx420series (from cnijfilter-mx420series_3.50-1_amd64.deb) ...
Setting up cnijfilter-mx420series (3.50-1) ...
Processing triggers for libc-bin ...
root@debian:/home/belette/Downloads/printer# dpkg -i scangearmp-common_1.70-1_amd64.deb
Selecting previously unselected package scangearmp-common.
(Reading database ... 136661 files and directories currently installed.)
Unpacking scangearmp-common (from scangearmp-common_1.70-1_amd64.deb) ...
Setting up scangearmp-common (1.70-1) ...
Processing triggers for libc-bin ...
root@debian:/home/belette/Downloads/printer# dpkg -i scangearmp-mx420series_1.70-1_amd64.deb
Selecting previously unselected package scangearmp-mx420series.
(Reading database ... 136706 files and directories currently installed.)
Unpacking scangearmp-mx420series (from scangearmp-mx420series_1.70-1_amd64.deb) ...
Setting up scangearmp-mx420series (1.70-1) ...
Processing triggers for libc-bin ...
root@debian:/home/belette/Downloads/printer#

So what is missing? Why Debian find the scanner plugged in ethernet and not Mageia?
For scangearmp (launch in console), i don't need to be root, I can use the scanner on my Debian without problems.

Any idea on this will be hepful

Debian powaaaaa?