sane-find-scanner
scanimage -L
rpm -qa|sort|grep -E "hplip|hpaio"
hp-check -r
[root@localhost colin]# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0 [HP], product=0xe511 [OfficeJet 3830 series]) at libusb:001:005
found USB scanner (vendor=0x067b, product=0x2303) at libusb:003:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
[root@localhost colin]# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[root@localhost colin]# rpm -qa|sort|grep -E "hplip|hpaio"
hplip-3.14.6-8.1.mga5
hplip-gui-3.14.6-8.1.mga5
hplip-hpijs-3.14.6-8.1.mga5
hplip-hpijs-ppds-3.14.6-8.1.mga5
hplip-model-data-3.14.6-8.1.mga5
lib64sane-hpaio1-3.14.6-8.1.mga5
[root@localhost colin]# hp-check -r
Saving output in log file: /home/colin/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.6)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the
proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: mageia distro is not found in AUTH_TYPES
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Host: localhost
Proc: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Distribution: unknown 0.0
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.6
html=/usr/share/doc/hplip-3.14.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL - 0.113 OK -
gs Ghostscript REQUIRED 7.05 9.14 OK -
network Network-wget OPTIONAL - 1.15 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
error: dbus DBus REQUIRED - 1.8.20 MISSING 'DBUS may not be installed or not running'
error: cups CUPS REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
xsane SANE-GUI OPTIONAL 0.9 0.999 OK -
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 3.1.8 MISSING 'reportlab needs to be installed'
error: libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.2 MISSING 'libcrypto needs to be installed'
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.3 OK -
error: libjpeg JPEG-Lib REQUIRED - - MISSING 'libjpeg needs to be installed'
error: libpthread POSIX-Threads-Lib REQUIRED - 2.20 MISSING 'libpthread needs to be installed'
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
error: python-devel Python-SDK REQUIRED 2.2 2.7.9 MISSING 'python-devel needs to be installed'
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.3 OK -
error: cups-devel CUPS-SDK REQUIRED - - MISSING 'cups-devel needs to be installed'
error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane Scan-Lib REQUIRED - - OK -
error: cups-image CUPS-Image-Lib REQUIRED - - MISSING 'cups-image needs to be installed'
error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.6 OK -
hpmudext IO-Extension REQUIRED - 3.14.6 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-OfficeJet-3830-series
------------------------
Type: Unknown
Device URI: usb://HP/OfficeJet%203830%20series?serial=CN67B3J5KC0664&interface=1
PPD: /etc/cups/ppd/HP-OfficeJet-3830-series.ppd
PPD Description: HP Officejet 2620 Series, hpcups 3.14.6
Printer Rendering completedOfficeJet-3830-series is idle. enabled since Tue 06 Dec 2016 11:22:25 AM AST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
error: Unsupported model: OfficeJet_3830_series
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 12
Total Warnings: 2
Done.
[root@localhost colin]#
colinmurray wrote:found USB scanner (vendor=0x03f0 [HP], product=0xe511 [OfficeJet 3830 series]) at libusb:001:005
found USB scanner (vendor=0x067b, product=0x2303) at libusb:003:003
colinmurray wrote:HP-OfficeJet-3830-series
------------------------
Type: Unknown
Device URI: usb://HP/OfficeJet%203830%20series?seri ... nterface=1
PPD: /etc/cups/ppd/HP-OfficeJet-3830-series.ppd
PPD Description: HP Officejet 2620 Series, hpcups 3.14.6
Printer Rendering completedOfficeJet-3830-series is idle. enabled since Tue 06 Dec 2016 11:22:25 AM AST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
error: Unsupported model: OfficeJet_3830_series
hp-setup
hp-check -r
hp-doctor -g
colin@localhost ~]$ hp-check -r
Saving output in log file: /home/colin/hp-check.log
HP Linux Imaging and Printing System (ver. 3.15.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the
proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: mandrake distro is not found in AUTH_TYPES
warning: unknown-5 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Host: localhost
Proc: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Distribution: unknown 5
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.15.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 5 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.15.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.15.11
html=/usr/share/doc/hplip-3.15.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.15.11
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 07/12/16 13:19:29
version = 3.15.11
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.14 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.113 OK -
network network -wget OPTIONAL - 1.15 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
error: dbus DBus - Message bus system REQUIRED - 1.8.20 MISSING 'DBUS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 MISSING 'libcrypto needs to be installed'
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.1.8 OK -
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.3 OK -
python-xml Python XML libraries REQUIRED - 2.1.0 OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.9 OK -
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.11.3 OK -
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - 2.20 MISSING 'libpthread needs to be installed'
error: python-devel Python devel - Python development files REQUIRED 2.2 2.7.9 MISSING 'python-devel needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
---------------
| COMPILEDEP |
---------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.15.11 OK -
hpmudext IO-Extension REQUIRED - 3.15.11 OK -
-----------------------
| Scan Configuration |
-----------------------
scanext Scan-SANE-Extension REQUIRED - 3.15.11 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.15.11 OK 'hpaio found in /etc/sane.d/dll.conf'
-----------------------
| Other Dependencies |
-----------------------
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: No destinations added.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 13
Total Warnings: 0
Done.
[colin@localhost ~]$
[colin@localhost ~]$ hp-doctor -g
HP Linux Imaging and Printing System (ver. 3.15.11)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp-doctor[7048]: debug: Locking: /home/colin/.hplip/hp-doctor.lock
HP Linux Imaging and Printing System (ver. 3.15.11)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp-doctor[7048]: debug: Upgrade log saved in: /home/colin/.hplip/hp-doctor.log
hp-doctor[7048]: debug:
warning: mandrake distro is not found in AUTH_TYPES
hp-doctor[7048]: debug: ['unknown', 'mepis', 'debian', 'suse', 'mandriva', 'fedora', 'redhat', 'rhel', 'slackware', 'gentoo', 'redflag', 'ubuntu', 'xandros', 'freebsd', 'linspire', 'ark', 'pclinuxos', 'centos', 'igos', 'linuxmint', 'linpus', 'gos', 'boss', 'lfs']
hp-doctor[7048]: debug: HPLIP Description= Public version=3.15.11 Internal version = 3.15.11
hp-doctor[7048]: debug: Determining distro...
hp-doctor[7048]: debug: Distro name=mandrake
hp-doctor[7048]: debug: Distro version=5
hp-doctor[7048]: debug: distro=0, distro_version=5
hp-doctor[7048]: debug: Enable PPD install: True (False=drv)
hp-doctor[7048]: debug: Default UI toolkit: Qt4
hp-doctor[7048]: debug: Checking for dependency 'libcrypto'...
hp-doctor[7048]: debug: Checking for library 'libcrypto'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'crypto.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have libcrypto = False
hp-doctor[7048]: debug: Checking for dependency 'gs'...
hp-doctor[7048]: debug: Checking: gs -v (min ver=7.050000)
hp-doctor[7048]: debug: GPL Ghostscript 9.14 (2014-03-26)
Copyright (C) 2014 Artifex Software, Inc. All rights reserved.
hp-doctor[7048]: debug: GPL Ghostscript 9.14 (2014-03-26)
hp-doctor[7048]: debug: Ver=9.140000 Min ver=7.050000
hp-doctor[7048]: debug: have gs = True
hp-doctor[7048]: debug: Checking for dependency 'python-dbus'...
hp-doctor[7048]: debug: Checking for python-dbus (>= 0.80)...
hp-doctor[7048]: debug: Version: 1.2.0
hp-doctor[7048]: debug: have python-dbus = True
hp-doctor[7048]: debug: Checking for dependency 'cups-ddk'...
hp-doctor[7048]: debug: Checking for cups-ddk...
hp-doctor[7048]: debug: Searching for file 'media.defs' in '/usr/share/cups/ppdc/'...
hp-doctor[7048]: debug: File found at '/usr/share/cups/ppdc/media.defs'
hp-doctor[7048]: debug: have cups-ddk = True
hp-doctor[7048]: debug: Checking for dependency 'reportlab'...
hp-doctor[7048]: debug: Trying to import 'reportlab'...
hp-doctor[7048]: debug: Version: 3
hp-doctor[7048]: debug: Success.
hp-doctor[7048]: debug: have reportlab = True
hp-doctor[7048]: debug: Checking for dependency 'python-notify'...
hp-doctor[7048]: debug: have python-notify = True
hp-doctor[7048]: debug: Checking for dependency 'pyqt4'...
hp-doctor[7048]: debug: have pyqt4 = True
hp-doctor[7048]: debug: Checking for dependency 'python-xml'...
hp-doctor[7048]: debug: have python-xml = True
hp-doctor[7048]: debug: Checking for dependency 'libusb'...
hp-doctor[7048]: debug: Checking for library 'libusb-1.0'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file(s) 'libusb.h' in '/usr/include/libusb-1.0' that contain 'libusb_init'...
hp-doctor[7048]: debug: No files not found.
hp-doctor[7048]: debug: have libusb = 0
hp-doctor[7048]: debug: Checking for dependency 'libtool'...
hp-doctor[7048]: debug: Checking for libtool...
hp-doctor[7048]: debug: Checking: libtool --version (min ver=0.000000)
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: have libtool = False
hp-doctor[7048]: debug: Checking for dependency 'cups-image'...
hp-doctor[7048]: debug: Searching for file 'raster.h' in '/usr/include/cups'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have cups-image = False
hp-doctor[7048]: debug: Checking for dependency 'scanimage'...
hp-doctor[7048]: debug: Checking: scanimage --version (min ver=1.000000)
hp-doctor[7048]: debug: scanimage (sane-backends) 1.0.24; backend version 1.0.24
hp-doctor[7048]: debug: scanimage (sane-backends) 1.0.24; backend version 1.0.24
hp-doctor[7048]: debug: Ver=1.000000 Min ver=1.000000
hp-doctor[7048]: debug: have scanimage = True
hp-doctor[7048]: debug: Checking for dependency 'libnetsnmp-devel'...
hp-doctor[7048]: debug: Checking for library 'libnetsnmp'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'net-snmp-config.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have libnetsnmp-devel = False
hp-doctor[7048]: debug: Checking for dependency 'sane-devel'...
hp-doctor[7048]: debug: Searching for file(s) 'sane.h' in '/usr/include' that contain 'extern SANE_Status sane_init'...
hp-doctor[7048]: debug: No files not found.
hp-doctor[7048]: debug: have sane-devel = 0
hp-doctor[7048]: debug: Checking for dependency 'pil'...
hp-doctor[7048]: debug: Checking for PIL...
hp-doctor[7048]: debug: have pil = True
hp-doctor[7048]: debug: Checking for dependency 'xsane'...
hp-doctor[7048]: debug: Checking: installed ver=0.999 min ver=0.9
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: have xsane = True
hp-doctor[7048]: debug: Checking for dependency 'cups'...
hp-doctor[7048]: debug: scheduler is running
hp-doctor[7048]: debug: CUPS is running. scheduler is running
hp-doctor[7048]: debug: have cups = True
hp-doctor[7048]: debug: Checking for dependency 'policykit'...
hp-doctor[7048]: debug: Checking for PolicyKit...
hp-doctor[7048]: debug: Searching for file 'PolicyKit.conf' in '/etc/PolicyKit'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Searching for file '50-localauthority.conf' in '/etc/polkit-1/localauthority.conf.d'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Searching for file 'org.freedesktop.PolicyKit1.conf' in '/etc/dbus-1/system.d'...
hp-doctor[7048]: debug: File found at '/etc/dbus-1/system.d/org.freedesktop.PolicyKit1.conf'
hp-doctor[7048]: debug: have policykit = True
hp-doctor[7048]: debug: Checking for dependency 'python2X'...
hp-doctor[7048]: debug: Python ver=2.7
hp-doctor[7048]: debug: have python2X = True
hp-doctor[7048]: debug: Checking for dependency 'gcc'...
hp-doctor[7048]: debug: Checking: gcc --version (min ver=0.000000)
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: have gcc = False
hp-doctor[7048]: debug: Checking for dependency 'network'...
hp-doctor[7048]: debug: have network = True
hp-doctor[7048]: debug: Checking for dependency 'pyqt4-dbus'...
hp-doctor[7048]: debug: have pyqt4-dbus = True
hp-doctor[7048]: debug: Checking for dependency 'libjpeg'...
hp-doctor[7048]: debug: Checking for library 'libjpeg'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'jpeglib.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have libjpeg = False
hp-doctor[7048]: debug: Checking for dependency 'libpthread'...
hp-doctor[7048]: debug: Checking for library 'libpthread'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'pthread.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have libpthread = False
hp-doctor[7048]: debug: Checking for dependency 'make'...
hp-doctor[7048]: debug: Checking: make --version (min ver=3.000000)
hp-doctor[7048]: debug: GNU Make 4.0
Built for x86_64-mageia-linux-gnu
Copyright (C) 1988-2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
hp-doctor[7048]: debug: GNU Make 4.0
hp-doctor[7048]: debug: Ver=4.000000 Min ver=3.000000
hp-doctor[7048]: debug: have make = True
hp-doctor[7048]: debug: Checking for dependency 'python-devel'...
hp-doctor[7048]: debug: Searching for file 'Python.h' in '/usr/include/python2.7'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have python-devel = False
hp-doctor[7048]: debug: Checking for dependency 'cups-devel'...
hp-doctor[7048]: debug: Searching for file 'cups.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: have cups-devel = False
hp-doctor[7048]: debug: Checking for dependency 'sane'...
hp-doctor[7048]: debug: Checking for library 'libsane'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: have sane = True
hp-doctor[7048]: debug: Checking for dependency 'avahi-utils'...
hp-doctor[7048]: debug: have avahi-utils = True
hp-doctor[7048]: debug: Checking for dependency 'dbus'...
hp-doctor[7048]: debug: Checking for dbus running and header files present (dbus-devel)...
hp-doctor[7048]: debug: Searching for '['dbus-daemon']' in running processes...
hp-doctor[7048]: debug: Is_Process_Running output = message+ 793 0.0 0.1 21268 3660 ? Ss 12:50 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
colin 2318 0.0 0.0 20724 2520 ? Ss 12:51 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
colin 2531 0.0 0.0 20256 2804 ? S 12:51 0:00 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
root 2643 0.0 0.0 20256 228 ? Ss 12:52 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --fork (2643)
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf (2531)
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --system (793)
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --fork (2318)
hp-doctor[7048]: debug: Searching for file(s) 'dbus-message.h' in '/usr/include' that contain 'dbus_message_new_signal'...
hp-doctor[7048]: debug: No files not found.
hp-doctor[7048]: debug: have dbus = 0
hp-doctor[7048]: debug: have libcrypto = False
hp-doctor[7048]: debug: have gs = True
hp-doctor[7048]: debug: have python-dbus = True
hp-doctor[7048]: debug: have cups-ddk = True
hp-doctor[7048]: debug: have reportlab = True
hp-doctor[7048]: debug: have python-notify = True
hp-doctor[7048]: debug: have pyqt4 = True
hp-doctor[7048]: debug: have python-xml = True
hp-doctor[7048]: debug: have libusb = 0
hp-doctor[7048]: debug: have libtool = False
hp-doctor[7048]: debug: have cups-image = False
hp-doctor[7048]: debug: have scanimage = True
hp-doctor[7048]: debug: have libnetsnmp-devel = False
hp-doctor[7048]: debug: have sane-devel = 0
hp-doctor[7048]: debug: have pil = True
hp-doctor[7048]: debug: have xsane = True
hp-doctor[7048]: debug: have cups = True
hp-doctor[7048]: debug: have policykit = True
hp-doctor[7048]: debug: have python2X = True
hp-doctor[7048]: debug: have gcc = False
hp-doctor[7048]: debug: have network = True
hp-doctor[7048]: debug: have pyqt4-dbus = True
hp-doctor[7048]: debug: have libjpeg = False
hp-doctor[7048]: debug: have libpthread = False
hp-doctor[7048]: debug: have make = True
hp-doctor[7048]: debug: have python-devel = False
hp-doctor[7048]: debug: have cups-devel = False
hp-doctor[7048]: debug: have sane = True
hp-doctor[7048]: debug: have avahi-utils = True
hp-doctor[7048]: debug: have dbus = 0
hp-doctor[7048]: debug: Searching for '['yast', 'yast2', 'opensuse-updater', 'zypper', 'package-manager', 'yum', 'rpm', 'up2date', 'dpkg', 'apt-get', 'synaptic', 'update-manager', 'adept', 'aptitude', 'adept-updater', 'gpk-update-viewer', 'pup', 'urpmi']' in running processes...
hp-doctor[7048]: debug: Is_Process_Running output =
hp-doctor[7048]: debug: Is_Process_Running output =
hp-doctor[7048]: debug: Is_Process_Running output =
hp-doctor[7048]: debug: Is_Process_Running output =
hp-doctor[7048]: debug: Is_Process_Running output =
hp-doctor[7048]: debug: Is_Process_Running output =
hp-doctor[7048]: debug: Is_Process_Running output = root 4506 5.0 31.3 1596476 964620 ? Sl 13:10 1:03 /usr/bin/perl /usr/libexec/drakrpm --embedded 62918818
hp-doctor[7048]: debug: Found: /usr/bin/perl /usr/libexec/drakrpm (4506)
hp-doctor[7048]: debug: Running package manager: /usr/bin/perl /usr/libexec/drakrpm (4506)
hp-doctor[7048]: debug: Bitness = 64
hp-doctor[7048]: debug: Endian = 1
hp-doctor[7048]: debug: Distro = 0 Distro Name = unknown Display Name= Unknown Version = 5 Supported = False
hp-doctor[7048]: debug: Checking for HPLIP...
hp-doctor[7048]: debug: Searching for file(s) 'hplip.conf' in '/etc/hp'...
hp-doctor[7048]: debug: /etc/hp/hplip.conf
hp-doctor[7048]: debug: Found files: ['/etc/hp/hplip.conf']
hp-doctor[7048]: debug: HPLIP (prev install) = ['/etc/hp/hplip.conf']
hp-doctor[7048]: debug: CUPS version =
hp-doctor[7048]: debug: DBUS configuration reload possible? False
hp-doctor[7048]: debug: Linux localhost 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
hp-doctor[7048]: debug: Linux localhost 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Checking for Deprecated items....
error: This distro (i.e unknown 5) is either deprecated or not yet supported.
The diagnosis is limited on unsupported platforms. Do you want to continue?(y=yes*, n=no):y
Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility
Checking for Dependencies....
warning: unknown-5 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
hp-doctor[7048]: debug: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
hp-doctor[7048]: debug: localhost
hp-doctor[7048]: debug: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Kernel: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Host: localhost
Proc: 4.4.32-desktop-1.mga5 #1 SMP Tue Nov 15 09:08:15 UTC 2016 GNU/Linux
Distribution: unknown 5
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.15.11
HPLIP-Home: /usr/share/hplip
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 5 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.15.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.15.11
html=/usr/share/doc/hplip-3.15.11
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.15.11
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 07/12/16 13:31:19
version = 3.15.11
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
hp-doctor[7048]: debug: Checking: gs --version
hp-doctor[7048]: debug: 9.14
hp-doctor[7048]: debug: 9.14
hp-doctor[7048]: debug: Checking: gs -v (min ver=7.050000)
hp-doctor[7048]: debug: GPL Ghostscript 9.14 (2014-03-26)
Copyright (C) 2014 Artifex Software, Inc. All rights reserved.
hp-doctor[7048]: debug: GPL Ghostscript 9.14 (2014-03-26)
hp-doctor[7048]: debug: Ver=9.140000 Min ver=7.050000
hp-doctor[7048]: debug: Checking: installed ver=9.14 min ver=7.05
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.14 OK -
hp-doctor[7048]: debug: Checking: scanimage --version
hp-doctor[7048]: debug: scanimage (sane-backends) 1.0.24; backend version 1.0.24
hp-doctor[7048]: debug: scanimage (sane-backends) 1.0.24; backend version 1.0.24
hp-doctor[7048]: debug: Checking: scanimage --version (min ver=1.000000)
hp-doctor[7048]: debug: scanimage (sane-backends) 1.0.24; backend version 1.0.24
hp-doctor[7048]: debug: scanimage (sane-backends) 1.0.24; backend version 1.0.24
hp-doctor[7048]: debug: Ver=1.000000 Min ver=1.000000
hp-doctor[7048]: debug: Checking: installed ver=1.0.24 min ver=1.0
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
hp-doctor[7048]: debug: Checking: installed ver=0.999 min ver=0.9
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Checking: installed ver=0.999 min ver=0.9
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
hp-doctor[7048]: debug: Checking: cups-config --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: scheduler is running
hp-doctor[7048]: debug: CUPS is running. scheduler is running
hp-doctor[7048]: debug: Checking: installed ver=- min ver=1.1
hp-doctor[7048]: debug: Found, but newer version required.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
hp-doctor[7048]: debug: cups -ddk not required as cups version [-] is => 1.4
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
hp-doctor[7048]: debug: Checking: pkexec --version
hp-doctor[7048]: debug: pkexec version 0.113
hp-doctor[7048]: debug: pkexec version 0.113
hp-doctor[7048]: debug: Checking for PolicyKit...
hp-doctor[7048]: debug: Searching for file 'PolicyKit.conf' in '/etc/PolicyKit'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Searching for file '50-localauthority.conf' in '/etc/polkit-1/localauthority.conf.d'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Searching for file 'org.freedesktop.PolicyKit1.conf' in '/etc/dbus-1/system.d'...
hp-doctor[7048]: debug: File found at '/etc/dbus-1/system.d/org.freedesktop.PolicyKit1.conf'
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.113 OK -
hp-doctor[7048]: debug: Checking: wget --version
hp-doctor[7048]: debug: GNU Wget 1.15 built on linux-gnu.
+digest +https +ipv6 +iri +large-file +nls +ntlm +opie +ssl/openssl
Wgetrc:
/etc/wgetrc (system)
Locale:
/usr/share/locale
Compile:
gcc -DHAVE_CONFIG_H -DSYSTEM_WGETRC="/etc/wgetrc"
-DLOCALEDIR="/usr/share/locale" -I. -I../lib -I../lib -O2 -g -pipe
-Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
-fstack-protector --param=ssp-buffer-size=4 -fPIC
Link:
gcc -O2 -g -pipe -Wformat -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4
-fPIC -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1
-Wl,--build-id -Wl,--enable-new-dtags /usr/lib64/libssl.so
/usr/lib64/libcrypto.so -ldl -lz -lidn ftp-opie.o openssl.o
http-ntlm.o ../lib/libgnu.a
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://www.gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Originally written by Hrvoje Niksic <hniksic@xemacs.org>.
Please send bug reports and questions to <bug-wget@gnu.org>.
hp-doctor[7048]: debug: GNU Wget 1.15 built on linux-gnu.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
network network -wget OPTIONAL - 1.15 OK -
hp-doctor[7048]: debug: Checking: avahi-browse --version
hp-doctor[7048]: debug: avahi-browse 0.6.31
hp-doctor[7048]: debug: avahi-browse 0.6.31
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
hp-doctor[7048]: debug: Checking: dbus-daemon --version
hp-doctor[7048]: debug: D-Bus Message Bus Daemon 1.8.20
Copyright (C) 2002, 2003 Red Hat, Inc., CodeFactory AB, and others
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
hp-doctor[7048]: debug: D-Bus Message Bus Daemon 1.8.20
hp-doctor[7048]: debug: Checking for dbus running and header files present (dbus-devel)...
hp-doctor[7048]: debug: Searching for '['dbus-daemon']' in running processes...
hp-doctor[7048]: debug: Is_Process_Running output = message+ 793 0.0 0.1 21268 3660 ? Ss 12:50 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
colin 2318 0.0 0.0 20724 2520 ? Ss 12:51 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
colin 2531 0.0 0.0 20256 2804 ? S 12:51 0:00 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
root 2643 0.0 0.0 20256 228 ? Ss 12:52 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --fork (2643)
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf (2531)
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --system (793)
hp-doctor[7048]: debug: Found: /usr/bin/dbus-daemon --fork (2318)
hp-doctor[7048]: debug: Searching for file(s) 'dbus-message.h' in '/usr/include' that contain 'dbus_message_new_signal'...
hp-doctor[7048]: debug: No files not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: dbus DBus - Message bus system REQUIRED - 1.8.20 MISSING 'DBUS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
hp-doctor[7048]: debug: Checking: openssl version
hp-doctor[7048]: debug: OpenSSL 1.0.2j 26 Sep 2016
hp-doctor[7048]: debug: OpenSSL 1.0.2j 26 Sep 2016
hp-doctor[7048]: debug: Checking for library 'libcrypto'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'crypto.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.2 MISSING 'libcrypto needs to be installed'
hp-doctor[7048]: debug: Checking for python-dbus (>= 0.80)...
hp-doctor[7048]: debug: Version: 1.2.0
hp-doctor[7048]: debug: Checking: installed ver=1.2.0 min ver=0.80.0
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
hp-doctor[7048]: debug: Trying to import 'reportlab'...
hp-doctor[7048]: debug: Trying to import 'reportlab'...
hp-doctor[7048]: debug: Version: 3
hp-doctor[7048]: debug: Success.
hp-doctor[7048]: debug: Checking: installed ver=3.1.8 min ver=2.0
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.1.8 OK -
hp-doctor[7048]: debug: Checking: python-notify --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
hp-doctor[7048]: debug: Checking PyQt 4.x version...
hp-doctor[7048]: debug: Checking: installed ver=4.11.3 min ver=4.0
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Checking: installed ver=4.11.3 min ver=2.3
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Checking: installed ver=4.11.3 min ver=2.2
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.3 OK -
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
python-xml Python XML libraries REQUIRED - 2.1.0 OK -
hp-doctor[7048]: debug: Checking for library 'libusb-1.0'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file(s) 'libusb.h' in '/usr/include/libusb-1.0' that contain 'libusb_init'...
hp-doctor[7048]: debug: No files not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
hp-doctor[7048]: debug: Checking: cups-config --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Searching for file 'raster.h' in '/usr/include/cups'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
hp-doctor[7048]: debug: Checking: net-snmp-config --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Checking for library 'libnetsnmp'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'net-snmp-config.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
hp-doctor[7048]: debug: Checking: sane-config --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Searching for file(s) 'sane.h' in '/usr/include' that contain 'extern SANE_Status sane_init'...
hp-doctor[7048]: debug: No files not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
hp-doctor[7048]: debug: Checking for PIL...
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
hp-doctor[7048]: debug: Checking: python --version
hp-doctor[7048]: debug: Python 2.7.9
hp-doctor[7048]: debug: Python 2.7.9
hp-doctor[7048]: debug: Python ver=2.7
hp-doctor[7048]: debug: Checking: installed ver=2.7.9 min ver=2.2
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.9 OK -
hp-doctor[7048]: debug: Checking PyQt 4.x version...
hp-doctor[7048]: debug: Checking: installed ver=4.11.3 min ver=4.0
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.11.3 OK -
hp-doctor[7048]: debug: Checking for library 'libjpeg'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'jpeglib.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
hp-doctor[7048]: debug: Checking for library 'libpthread'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Searching for file 'pthread.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: libpthread libpthread - POSIX threads library REQUIRED - 2.20 MISSING 'libpthread needs to be installed'
hp-doctor[7048]: debug: Checking: python --version
hp-doctor[7048]: debug: Python 2.7.9
hp-doctor[7048]: debug: Python 2.7.9
hp-doctor[7048]: debug: Searching for file 'Python.h' in '/usr/include/python2.7'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: python-devel Python devel - Python development files REQUIRED 2.2 2.7.9 MISSING 'python-devel needs to be installed'
hp-doctor[7048]: debug: Checking: cups-config --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Searching for file 'cups.h' in '/usr/include'...
hp-doctor[7048]: debug: File not found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
hp-doctor[7048]: debug: Checking: sane-config --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Checking for library 'libsane'...
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
sane SANE - Scanning library REQUIRED - - OK -
---------------
| COMPILEDEP |
---------------
hp-doctor[7048]: debug: Checking: libtool --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Checking for libtool...
hp-doctor[7048]: debug: Checking: libtool --version (min ver=0.000000)
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
hp-doctor[7048]: debug: Checking: gcc --version
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Checking: gcc --version (min ver=0.000000)
hp-doctor[7048]: debug: Not found!
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
hp-doctor[7048]: debug: Checking: make --version
hp-doctor[7048]: debug: GNU Make 4.0
Built for x86_64-mageia-linux-gnu
Copyright (C) 1988-2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
hp-doctor[7048]: debug: GNU Make 4.0
hp-doctor[7048]: debug: Checking: make --version (min ver=3.000000)
hp-doctor[7048]: debug: GNU Make 4.0
Built for x86_64-mageia-linux-gnu
Copyright (C) 1988-2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
hp-doctor[7048]: debug: GNU Make 4.0
hp-doctor[7048]: debug: Ver=4.000000 Min ver=3.000000
hp-doctor[7048]: debug: Checking: installed ver=4.0 min ver=3.0
hp-doctor[7048]: debug: Found.
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
hp-doctor[7048]: debug: Checking 'cupsext' CUPS extension...
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
cupsext CUPS-Extension REQUIRED - 3.15.11 OK -
hp-doctor[7048]: debug: Checking 'hpmudext' I/O extension...
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
hpmudext IO-Extension REQUIRED - 3.15.11 OK -
-----------------------
| Scan Configuration |
-----------------------
hp-doctor[7048]: debug: Checking 'scanext' SANE scanning extension...
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
scanext Scan-SANE-Extension REQUIRED - 3.15.11 OK -
hp-doctor[7048]: debug: 'Checking for hpaio' in '/etc/sane.d/dll.conf'...
hp-doctor[7048]: debug: Auto installation is not supported for Distro =unknown version =5
hpaio HPLIP-SANE-Backend REQUIRED - 3.15.11 OK 'hpaio found in /etc/sane.d/dll.conf'
-----------------------
| Other Dependencies |
-----------------------
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
hp-doctor[7048]: debug:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
hp-doctor[7048]: debug: lpstat: No destinations added.
hp-doctor[7048]: debug: [(u'lpstat', u'No destinations added.')]
hp-doctor[7048]: debug: Exception: 4 (Unknown/invalid device-uri field)
lpstat
------
Type: Unknown
Device URI: No destinations added.
--------------
| PERMISSION |
--------------
hp-doctor[7048]: debug: Bus 001 Device 002: ID 03f0:e511 Hewlett-Packard
hp-doctor[7048]: debug: Bus 001 Device 002: ID 03f0:e511 Hewlett-Packard
hp-doctor[7048]: debug: Device URI: (Makeuri FAILED)
hp-doctor[7048]: debug: Bus 001 Device 002: ID 03f0:e511 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Checking Permissions....
Checking for Configured Queues....
hp-doctor[7048]: debug: lpstat: No destinations added.
No Queue added
hp-doctor[7048]: debug: []
hp-doctor[7048]: debug: HPCups installation=1 HPIJS installation =1
hp-doctor[7048]: debug: Bus 001 Device 002: ID 03f0:e511 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
warning: No Queue(s) configured.
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
hp-doctor[7048]: debug: Bus 001 Device 002: ID 03f0:e511 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Diagnose completed...
More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
hp-doctor[7048]: debug: Unlocking: /home/colin/.hplip/hp-doctor.lock
[colin@localhost ~]$
Return to Printers and Scanners
Users browsing this forum: No registered users and 1 guest