I have a similar problem. I have a printer-scanner Brother DCP-195C. I downloaded the driver on Brother's website, as explained. I carefully checked the prerequisites on Brother's website and installed the packages they required (CUPS, ...). I then followed the instruction:
http://support.brother.com/g/b/downloadhowto.aspx?c=fr&lang=fr&prod=dcp195c_all&os=127&dlid=dlf006893_000&flang=4&type3=625
(these are the same instruction as above).
Here are the inputs and outputs from the terminal:
- Code: Select all
[root@localhost Bureau]# bash linux-brprinter-installer-2.0.0-1
Input model name ->DCP195C
You are going to install following packages.
dcp195clpr-1.1.3-1.i386.rpm
dcp195ccupswrapper-1.1.3-1.i386.rpm
brscan3-0.2.13-1.x86_64.rpm
brscan-skey-0.2.4-1.x86_64.rpm
OK? [y/N] ->y
rpm -ihv --nodeps --replacefiles --replacepkgs dcp195clpr-1.1.3-1.i386.rpm
Préparation... ################################# [100%]
Mise à jour / installation...
1:dcp195clpr-1.1.3-1 ################################# [100%]
rpm -ihv --nodeps --replacefiles --replacepkgs dcp195ccupswrapper-1.1.3-1.i386.rpm
Préparation... ########################################
Mise à jour / installation...
dcp195ccupswrapper-1.1.3-1 ########################################
lpinfo: Mauvais descripteur de fichier
lpinfo: Mauvais descripteur de fichier
lpinfo: Mauvais descripteur de fichier
lpadmin: Unable to connect to server: Mauvais descripteur de fichier
###############################ls: impossible d'accéder à /usr/share/ppd/*.ppd: Aucun fichier ou dossier de ce type
ls: impossible d'accéder à /usr/share/cups/model/*.ppd: Aucun fichier ou dossier de ce type
#
lpinfo: Mauvais descripteur de fichier
0 (I): Specify IP address.
1 (A): Auto. (usb://dev/usblp0)
select the number of destination Device URI. ->A
lpadmin -p DCP195C -v usb://dev/usblp0 -E
lpadmin: Unable to connect to server: Mauvais descripteur de fichier
Test Print? [y/N] ->y
wait 5s.
lpr -P DCP195C /usr/share/cups/data/testprint
lpr: Mauvais descripteur de fichier
"Mauvais descripteur de fichier" = "bad file descriptor"
"impossible d'accéder à" = "impossible to access to"
"Aucun fichier ou dossier de ce type" = "no file or folder of that type"
The test print failed.
The script then proceeds to install the scanner part, which works fine. The printer, however, does not work (it does work under Windows, so it is not a problem from the printer itself).
Does anyone knows how to make it work? Thank you in advance!