HP_LaserJet_CM1415fn_fax Faxversand nicht möglich

[letzter3]

Hallo zusammen,

unter Mageia 4 noch voll funktionstüchtig, unter Mageia 5 leider nicht mehr: der Versand per fax mit einem HP-Fax.
Es öffnet sich der Dialog für die Eingabe der Faxnummer nicht.

Code: Alles auswählen

[root@wuerfel ~]# hp-faxsetup
warning: hp-faxsetup should not be run as root/superuser.

HP Linux Imaging and Printing System (ver. 3.14.6)                                                                                                                                                                                                                                       
Fax Device Setup Utility ver. 0.1                                                                                                                                                                                                                                                         
                                                                                                                                                                                                                                                                                         
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP                                                                                                                                                                                                                             
This software comes with ABSOLUTELY NO WARRANTY.                                                                                                                                                                                                                                         
This is free software, and you are welcome to distribute it                                                                                                                                                                                                                               
under certain conditions. See COPYING file for more details.                                                                                                                                                                                                                             
                                                                                                                                                                                                                                                                                         
Using device: hp:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100                                                                                                                                                                                                                               
                                                                                                                                                                                                                                                                                         
Traceback (most recent call last):                                                                                                                                                                                                                                                       
  File "/usr/share/hplip/ui4/faxsetupdialog.py", line 141, in FaxComboBox_currentChanged                                                                                                                                                                                                 
    self.dev = fax.getFaxDevice(self.device_uri)                                                                                                                                                                                                                                         
  File "/usr/share/hplip/fax/fax.py", line 529, in getFaxDevice
    return LEDMSOAPFaxDevice(device_uri, printer_name, callback, fax_type, disable_dbus)
  File "/usr/share/hplip/fax/ledmsoapfax.py", line 54, in __init__
    disable_dbus)
  File "/usr/share/hplip/fax/soapfax.py", line 73, in __init__
    disable_dbus)
  File "/usr/share/hplip/fax/fax.py", line 438, in __init__
    self.service = session_bus.get_object('com.hplip.StatusService', "/com/hplip/StatusService")
  File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 241, in get_object
    follow_name_owner_changes=follow_name_owner_changes)
  File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
    self._named_service = conn.activate_name_owner(bus_name)
  File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 180, in activate_name_owner
    self.start_service_by_name(bus_name)
  File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 278, in start_service_by_name
    'su', (bus_name, flags)))
  File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in call_blocking
    message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name com.hplip.StatusService was not provided by any .service files
Traceback (most recent call last):
  File "/usr/share/hplip/ui4/faxsetupdialog.py", line 252, in Tabs_currentChanged
    self.updateHeaderTab()
  File "/usr/share/hplip/ui4/faxsetupdialog.py", line 261, in updateHeaderTab
    name_company = self.dev.getStationName()
AttributeError: 'NoneType' object has no attribute 'getStationName'
Traceback (most recent call last):
  File "/usr/share/hplip/ui4/faxsetupdialog.py", line 252, in Tabs_currentChanged
    self.updateHeaderTab()
  File "/usr/share/hplip/ui4/faxsetupdialog.py", line 261, in updateHeaderTab
    name_company = self.dev.getStationName()
AttributeError: 'NoneType' object has no attribute 'getStationName'

Code: Alles auswählen

[letzter@wuerfel ~]$ hp-doctor

HP Linux Imaging and Printing System (ver. 3.14.6)
Self Diagnse Utility and Healing Utility ver. 1.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

warning: mageia distro is not found in AUTH_TYPES
 

Checking for Deprecated items....
error: This distro (i.e unknown  0.0) is either deprecated or not yet supported.
The diagnosis is limited on unsupported platforms. Do you want to continue?(y=yes*, n=no):


Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility


Checking for Dependencies....
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 4.1.8-desktop-1.mga5 #1 SMP Sun Sep 20 12:39:07 UTC 2015 GNU/Linux
 Host: wuerfel.localdomain
 Proc: 4.1.8-desktop-1.mga5 #1 SMP Sun Sep 20 12:39:07 UTC 2015 GNU/Linux
 Distribution: unknown 0.0
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro  0.0 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.14.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.14.6
html=/usr/share/doc/hplip-3.14.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.14.6



Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100"
printer_name =
working_dir = .

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =

[upgrade]
notify_upgrade = false
last_upgraded_time = 1445694482.67596
pending_upgrade_time = 0

[installation]
date_time = 10/25/15 12:10:03
version = 3.14.6


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------------------
|  External Dependencies |
--------------------------

 policykit            Admin-Policy-framework    OPTIONAL        -               0.113           OK         -
 gs                   Ghostscript               REQUIRED        7.05            9.14            OK         -
 network              Network-wget              OPTIONAL        -               1.15            OK         -
 scanimage            Shell-Scanning            OPTIONAL        1.0             1.0.24          OK         -
 avahi-utils          avahi-utils               OPTIONAL        -               0.6.31          OK         -
 error: dbus          DBus                      REQUIRED        -               1.8.16          MISSING    'DBUS may not be installed or not running'
 error: cups          CUPS                      REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 xsane                SANE-GUI                  OPTIONAL        0.9             0.999           OK         -

-------------------------
|  General Dependencies |
-------------------------

 error: reportlab     Python-PDF-Lib            OPTIONAL        2.0             3.1.8           MISSING    'reportlab needs to be installed'
 error: libcrypto     OpenSSL-Crypto-Lib        REQUIRED        -               1.0.2           MISSING    'libcrypto needs to be installed'
 pil                  Python-Image-Lib          OPTIONAL        -               1.1.7           OK         -
 pyqt4-dbus           PyQt4-DBUS                REQUIRED        4.0             4.11.3          OK         -
 error: libjpeg       JPEG-Lib                  REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 libpthread           POSIX-Threads-Lib         REQUIRED        -               2.20            OK         -
 python-dbus          Python-DBUS               REQUIRED        0.80.0          1.2.0           OK         -
 error: python-devel  Python-SDK                REQUIRED        2.2             2.7.9           MISSING    'python-devel needs to be installed'
 pyqt4                Python-Qt4                REQUIRED        4.0             4.11.3          OK         -
 error: cups-devel    CUPS-SDK                  REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: sane-devel    SANE-SDK                  REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libusb        USB-Lib                   REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 Scan-Lib                  REQUIRED        -               -               OK         -
 error: cups-image    CUPS-Image-Lib            REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 error: libnetsnmp-devel SNMP-Networking-SDK       REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 python-xml           Python-XML-Lib            REQUIRED        -               2.1.0           OK         -
 error: python-notify Desktop-notifications     OPTIONAL        -               -               MISSING    'python-notify needs to be installed'

------------------------------
|  Compile Time Dependencies |
------------------------------

 error: gcc           gcc-Compiler              REQUIRED        -               4.9.2           MISSING    'gcc needs to be installed'
 error: libtool       Build-tools               REQUIRED        -               -               MISSING    'libtool needs to be installed'
 make                 GNU-Build-tools           REQUIRED        3.0             4.0             OK         -

----------------------
|  Python Extentions |
----------------------

 cupsext              CUPS-Extension            REQUIRED        -               3.14.6          OK         -
 pcardext             PhotoCard-Extension       REQUIRED        -               3.14.6          OK         -
 hpmudext             IO-Extension              REQUIRED        -               3.14.6          OK         -

-----------------------
|  Scan Configuration |
-----------------------

 hpaio                HPLIP-SANE-Backend        REQUIRED        -               3.14.6          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension       REQUIRED        -               3.14.6          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100' is a Hewlett-Packard HP_LaserJet_CM1415fn all-in-one


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                                                Model                                                   
  --------------------------------------------------------  --------------------------------------------------------
  hp:/usb/DeskJet_930C?serial=ES0AB19190JJ                  HP DeskJet 930C                                         

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_LaserJet_CM1415fn
--------------------
Type: Printer
Device URI: hp:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
PPD: /etc/cups/ppd/HP_LaserJet_CM1415fn.ppd
PPD Description: HP LaserJet CM1410 Series Postscript (recommended)
Printer status: printer HP_LaserJet_CM1415fn is idle.  enabled since Sa 24 Okt 2015 11:55:52 CEST
Required plug-in status: Installed
Communication status: Good

HP_LaserJet_CM1415fn_fax
------------------------
Type: Fax
Device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
PPD: /etc/cups/ppd/HP_LaserJet_CM1415fn_fax.ppd
PPD Description: HP Fax2 hpcups
Printer Rendering completedLaserJet_CM1415fn_fax disabled since Sa 24 Okt 2015 15:46:09 CEST -
Required plug-in status: Installed
Communication status: Good


--------------
| PERMISSION |
--------------

USB             None                           Required        -        -        OK       Node:'/dev/bus/usb/001/004' Perm:'  root  scanner rw- rw- rw- rw- rw- r--'
 

Checking Permissions....
Permissions are correct.


Checking for Configured Queues....
error: PPD /etc/cups/ppd/SW-LaserJet1200.ppd file not found
warning: SW-LaserJet1200 is not HP Device.
warning: Fail to read ppd=/etc/cups/ppd/SW-LaserJet1200.ppd file
warning: Device SW-LaserJet1200 is not HPLIP installed. Device must use the hp: or hpfax: to function in HPLIP.

error: 'SW-LaserJet1200' is not configured using HPLIP. Need to remove and re-cofigure using hp-setup.
Do you want to remove and re-configure? (y=yes*, n=no, q=quit) ? n
 

Checking for HP Properitery Plugin's....
Plugin's already installed
 
Diagnose completed...



More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
[letzter@wuerfel ~]$


Wer kann helfen?

[doktor5000]

Für root wird keine dbus-Session laufen, daher kann darüber auch kein weiterer Dienst aufgerufen werden:

[root@wuerfel ~]# hp-faxsetup
warning: hp-faxsetup should not be run as root/superuser.


dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name com.hplip.StatusService was not provided by any .service files

[doktor5000]

Zusätzlich bitte noch überprüfen ob das Verzeichnis /var/log/hp/tmp existiert und welche Berechtigungen es hat.

[letzter3]

Existiert und ist leer.

Code: Alles auswählen

drwxrwxr-T 2 root lp 4096 Sep  4 02:49 tmp/
[root@wuerfel hp]#

[doktor5000]

Und was für Ausgaben kommen wenn du es als normaler Nutzer startest ? Ggf. via

Code: Alles auswählen

hp-sendfax -ldebug

[letzter3]

Code: Alles auswählen

[letzter@wuerfel ~]$ hp-sendfax -ldebug

HP Linux Imaging and Printing System (ver. 3.14.6)
PC Sendfax Utility ver. 9.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

hp-sendfax[4474]: debug: getPrinterName(None, None, ['hpfax'], {'fax-type': (<built-in function gt>, 0)})
hp-sendfax[4474]: debug: Mode=1
hp-sendfax[4474]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-sendfax[4474]: debug: Cache miss: hp_laserjet_cm1415fn
hp-sendfax[4474]: debug: Reading file: /usr/share/hplip/data/models/models.dat
hp-sendfax[4474]: debug: Searching for section [hp_laserjet_cm1415fn] in file /usr/share/hplip/data/models/models.dat
hp-sendfax[4474]: debug: Found section [hp_laserjet_cm1415fn] in file /usr/share/hplip/data/models/models.dat
hp-sendfax[4474]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-sendfax[4474]: debug: [u'HP_LaserJet_CM1415fn_fax']
Using printer: HP_LaserJet_CM1415fn_fax

hp-sendfax[4474]: debug: Exception: 4 (Unknown/invalid device-uri field)
warning: Pre-2.0 version of Reportlab installed. Fax coverpages disabled.
warning: Please install version 2.0+ of Reportlab for coverpage support.
hp-sendfax[4474]: debug: Loading user settings...
hp-sendfax[4474]: debug: FAB command: /usr/bin/hp-fab
hp-sendfax[4474]: debug: Scan command: /usr/bin/xsane -V %SANE_URI%
hp-sendfax[4474]: debug: Auto refresh: False
hp-sendfax[4474]: debug: Auto refresh rate: 30
hp-sendfax[4474]: debug: Auto refresh type: 1
hp-sendfax[4474]: debug: Systray visible: 0
hp-sendfax[4474]: debug: Systray messages: 0
hp-sendfax[4474]: debug: Last used device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
hp-sendfax[4474]: debug: Last used printer: HP_LaserJet_CM1415fn_fax
hp-sendfax[4474]: debug: Working directory: .
hp-sendfax[4474]: debug: Loading user settings...
hp-sendfax[4474]: debug: FAB command: /usr/bin/hp-fab
hp-sendfax[4474]: debug: Scan command: /usr/bin/xsane -V %SANE_URI%
hp-sendfax[4474]: debug: Auto refresh: False                                                                                                                                                                                                                                             
hp-sendfax[4474]: debug: Auto refresh rate: 30                                                                                                                                                                                                                                           
hp-sendfax[4474]: debug: Auto refresh type: 1                                                                                                                                                                                                                                             
hp-sendfax[4474]: debug: Systray visible: 0                                                                                                                                                                                                                                               
hp-sendfax[4474]: debug: Systray messages: 0                                                                                                                                                                                                                                             
hp-sendfax[4474]: debug: Last used device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100                                                                                                                                                                                           
hp-sendfax[4474]: debug: Last used printer: HP_LaserJet_CM1415fn_fax                                                                                                                                                                                                                     
hp-sendfax[4474]: debug: Working directory: .                                                                                                                                                                                                                                             
hp-sendfax[4474]: debug: Loading user settings...                                                                                                                                                                                                                                         
hp-sendfax[4474]: debug: FAB command: /usr/bin/hp-fab                                                                                                                                                                                                                                     
hp-sendfax[4474]: debug: Scan command: /usr/bin/xsane -V %SANE_URI%                                                                                                                                                                                                                       
hp-sendfax[4474]: debug: Auto refresh: False                                                                                                                                                                                                                                             
hp-sendfax[4474]: debug: Auto refresh rate: 30                                                                                                                                                                                                                                           
hp-sendfax[4474]: debug: Auto refresh type: 1
hp-sendfax[4474]: debug: Systray visible: 0
hp-sendfax[4474]: debug: Systray messages: 0
hp-sendfax[4474]: debug: Last used device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
hp-sendfax[4474]: debug: Last used printer: HP_LaserJet_CM1415fn_fax
hp-sendfax[4474]: debug: Working directory: .
hp-sendfax[4474]: debug: Locking: /home/letzter/.hplip/hp-sendfax-HP_LaserJet_CM1415fn_fax.lock
hp-sendfax[4474]: debug: Starting GUI loop...

Jetzt wähle ich im Dialog ein pdf aus

Code: Alles auswählen

hp-sendfax[4474]: debug: Trying to add file: /home/letzter/Daten/ACFrOgBS3jscGhXriijh_n1tgL1-aSWhlHapKE9VRHT6aeoYxmNgkBe2D0kdBwsBoo0rtOt1kwF5pNlacj5SO1okWGuTQRRTAATgJbMxEjkK10s9GClKW6ipdVtV6Gk=.pdf
hp-sendfax[4474]: debug: File type of file /home/letzter/Daten/ACFrOgBS3jscGhXriijh_n1tgL1-aSWhlHapKE9VRHT6aeoYxmNgkBe2D0kdBwsBoo0rtOt1kwF5pNlacj5SO1okWGuTQRRTAATgJbMxEjkK10s9GClKW6ipdVtV6Gk=.pdf: application/pdf
hp-sendfax[4474]: debug: FileTable_callback(/home/letzter/Daten/ACFrOgBS3jscGhXriijh_n1tgL1-aSWhlHapKE9VRHT6aeoYxmNgkBe2D0kdBwsBoo0rtOt1kwF5pNlacj5SO1okWGuTQRRTAATgJbMxEjkK10s9GClKW6ipdVtV6Gk=.pdf)


Jetzt springt das Programm wieder auf den vorherigen Bildschirm, es ist keine Datei zum Faxen ausgewählt und ich kann das Spiel wiederholen.

[letzter3]

Habe den Drucker/das Fax nochmal über als root per hp-setup eingerichtet.
Mitschnitt des nachfolgenden sendfax als user wie folgt (vllt. etwas aussagekräftiger, da Fehler vorhanden):

Code: Alles auswählen

[letzter@wuerfel ~]$ hp-sendfax -ldebug

HP Linux Imaging and Printing System (ver. 3.14.6)
PC Sendfax Utility ver. 9.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

hp-sendfax[5044]: debug: getPrinterName(None, None, ['hpfax'], {'fax-type': (<built-in function gt>, 0)})
hp-sendfax[5044]: debug: Mode=1
hp-sendfax[5044]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-sendfax[5044]: debug: Cache miss: hp_laserjet_cm1415fn
hp-sendfax[5044]: debug: Reading file: /usr/share/hplip/data/models/models.dat
hp-sendfax[5044]: debug: Searching for section [hp_laserjet_cm1415fn] in file /usr/share/hplip/data/models/models.dat
hp-sendfax[5044]: debug: Found section [hp_laserjet_cm1415fn] in file /usr/share/hplip/data/models/models.dat
hp-sendfax[5044]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-sendfax[5044]: debug: [u'HP_LaserJet_CM1415fn_fax', u'HP_LaserJet_CM1415fn_fax_2']
hp-sendfax[5044]: debug: No printer selected/specified
warning: Pre-2.0 version of Reportlab installed. Fax coverpages disabled.
warning: Please install version 2.0+ of Reportlab for coverpage support.
hp-sendfax[5044]: debug: Loading user settings...
hp-sendfax[5044]: debug: FAB command: /usr/bin/hp-fab
hp-sendfax[5044]: debug: Scan command: /usr/bin/xsane -V %SANE_URI%
hp-sendfax[5044]: debug: Auto refresh: False
hp-sendfax[5044]: debug: Auto refresh rate: 30
hp-sendfax[5044]: debug: Auto refresh type: 1
hp-sendfax[5044]: debug: Systray visible: 0
hp-sendfax[5044]: debug: Systray messages: 0
hp-sendfax[5044]: debug: Last used device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
hp-sendfax[5044]: debug: Last used printer: HP_LaserJet_CM1415fn_fax
hp-sendfax[5044]: debug: Working directory: .
hp-sendfax[5044]: debug: Loading user settings...
hp-sendfax[5044]: debug: FAB command: /usr/bin/hp-fab
hp-sendfax[5044]: debug: Scan command: /usr/bin/xsane -V %SANE_URI%
hp-sendfax[5044]: debug: Auto refresh: False
hp-sendfax[5044]: debug: Auto refresh rate: 30
hp-sendfax[5044]: debug: Auto refresh type: 1
hp-sendfax[5044]: debug: Systray visible: 0
hp-sendfax[5044]: debug: Systray messages: 0
hp-sendfax[5044]: debug: Last used device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
hp-sendfax[5044]: debug: Last used printer: HP_LaserJet_CM1415fn_fax
hp-sendfax[5044]: debug: Working directory: .

HP Linux Imaging and Printing System (ver. 3.14.6)
System Tray Status Service ver. 2.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
  set_interactive(1)
error: Unable to find hp-upgrade --notify on PATH.
hp-sendfax[5044]: debug: Loading user settings...
hp-sendfax[5044]: debug: FAB command: /usr/bin/hp-fab
hp-sendfax[5044]: debug: Scan command: /usr/bin/xsane -V %SANE_URI%
hp-sendfax[5044]: debug: Auto refresh: False
hp-sendfax[5044]: debug: Auto refresh rate: 30
hp-sendfax[5044]: debug: Auto refresh type: 1
hp-sendfax[5044]: debug: Systray visible: 0
hp-sendfax[5044]: debug: Systray messages: 0
hp-sendfax[5044]: debug: Last used device URI: hpfax:/net/HP_LaserJet_CM1415fn?ip=192.168.0.100
hp-sendfax[5044]: debug: Last used printer: HP_LaserJet_CM1415fn_fax
hp-sendfax[5044]: debug: Working directory: .
hp-sendfax[5044]: debug: Starting GUI loop...
hp-sendfax[5044]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-sendfax[5044]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-sendfax[5044]: debug: Saving user settings...
hp-sendfax[5044]: debug: Saving user settings...
hp-sendfax[5044]: debug: Locking: /home/letzter/.hplip/hp-sendfax-HP_LaserJet_CM1415fn_fax_2.lock
Traceback (most recent call last):
  File "/usr/share/hplip/ui4/sendfaxdialog.py", line 1027, in NextButton_clicked
    self.displayCoverpagePage()
  File "/usr/share/hplip/ui4/sendfaxdialog.py", line 257, in displayCoverpagePage
    self.displayCoverpagePreview()
  File "/usr/share/hplip/ui4/sendfaxdialog.py", line 292, in displayCoverpagePreview
    self.cover_page_name = self.cover_page_list[self.cover_page_index]
AttributeError: 'SendFaxDialog' object has no attribute 'cover_page_list'
hp-sendfax[5044]: debug: Trying to add file: /home/letzter/Daten/VO-adR.pdf
hp-sendfax[5044]: debug: File type of file /home/letzter/Daten/VO-adR.pdf: application/pdf
hp-sendfax[5044]: debug: FileTable_callback(/home/letzter/Daten/VO-adR.pdf)


[doktor5000]

Ich würde sagen du solltest das Upstream melden: https://bugs.launchpad.net/hplip/+filebug - bei uns wurden noch keine Bugs für hp-sendfax gemeldet: https://bugs.mageia.org/buglist.cgi?qui ... t_id=55075

Was du vorher probieren könntest, wäre die Mageia-Pakete runterwerfen via

Code: Alles auswählen

urpme -a hplip $(rpm -E %_lib)hpip0 $(rpm -E %_lib)sane-hpaio1

und anschließend system-config-printer wieder installieren. Anschließend dann hplip via den Anleitungen auf deren Webseite händisch installieren:
http://hplipopensource.com/hplip-web/in ... driva.html bzw. http://hplipopensource.com/hplip-web/in ... other.html
Die Abhängigkeiten solltest du bspw. so installieren können:

Code: Alles auswählen

urpmi --buildrequires ftp://ftp.snt.utwente.nl/pub/os/linux/mageia/distrib/5/SRPMS/core/release/hplip-3.14.6-8.mga5.src.rpm

Bei Debian wurde ein ähnlicher Fehler gemeldet, aber ohne Antwort: https://bugs.debian.org/cgi-bin/bugrepo ... bug=767354