Wacom MobileStudio Pro auf mageia 6

Dieses Forum ist für die erweiterte Hilfe und Unterstützung vorgesehen:

Bitte stelle hier Deine Fragen zur fortgeschrittenen Benutzung von Mageia. Beispielsweise geht es hier um Fragen zum Netzwerk, automatischen Installationen, komplexer Serverkonfiguration, Kerneltuning, Aufsetzen eines Mageia-Mirrors, kurz gesagt: alle Aufgaben, die auch für erfahrene Benutzer eine Herausforderung sind.

Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 16th, '17, 20:33

Liebe Gruße an die Runde.
Ich bin nach 3 Wochen Problemsuche mit meinem Latein am Ende. Vom o.g. Wacom-TablettPC funktioniert der Fingertouch zwar, aber der Stylusstift läßt sich nicht aktivieren. Und den brauche ich wegen meiner Behinderung um mit dem Tablett arbeiten zu können.
Zuletzt wollte ich die .rules-Dateien des wdaemon auf das MobileStudio aktualisieren (weil der wdaemon mit wdaemon -a das MobileStudio als zu neu - nicht erkennt ), aber die 61´er rules wird von der libwacom automatisch generiert, also auch keine Chance – um dann den wdaemon in die xorg.conf zu integrieren.
Mit xsetwacom --list devices, xsetwacom und xinput werden Stylus, Eraser, Pad und Cursor richtig angezeigt und stehen dementsprechend jeweils als Stylus1, Eraser1, Pad1 und Cursor1 in der xorg.conf.
Mögliches Problem könnte aber auch sein, weil das MobileStudio zwei IDs hat (Fingertouch 0x56a:0x34b und SubID für den Pen 0x56a:0x34e).
Allerdings geht bei unser Schwester-Distribution openmandriva (LX 3) beides, Stylus & Finger – wie übrigens auch bei unserer "Tante" fedora. Jedoch startet omv nach einem Update (irgend eine D-Bus Geschichte) nicht mehr und Fedora 26 stürzt nach circa 10 min immer ab (nehme an – das Paket für den Thermofühler oder was anderes funzt da nicht).
Ja wie gesagt – bin mit meinem Latein am Ende, weiß nicht mehr weiter.

MfG webcys
PS. die xorg.log
Code: Alles auswählen
[  1892.396] (--) Log file renamed from "/var/log/Xorg.pid-23782.log" to "/var/log/Xorg.0.log"
[  1892.396]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[  1892.396] X Protocol Version 11, Revision 0
[  1892.396] Build Operating System: ecosse 4.4.88-server-1.mga5
[  1892.396] Current Operating System: Linux localhost.localdomain 4.9.56-desktop-1.mga6 #1 SMP Thu Oct 12 22:55:31 UTC 2017 x86_64
[  1892.396] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.56-desktop-1.mga6 root=UUID=74eecab5-6c8c-4273-9f07-2ae7bf050bf5 ro splash quiet noiswmd resume=UUID=19e57a1f-631e-4033-986b-682f86016a00 audit=0
[  1892.396] Build Date: 13 October 2017  04:36:29PM
[  1892.396] Build ID: x11-server 1.19.5-1.1.mga6
[  1892.396] Current version of pixman: 0.34.0
[  1892.396]    Before reporting problems, check https://bugs.mageia.org
   to make sure that you have the latest version.
[  1892.396] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1892.396] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 15 17:56:38 2017
[  1892.397] (==) Using config file: "/etc/X11/xorg.conf"
[  1892.397] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1892.397] (==) ServerLayout "layout1"
[  1892.397] (**) |-->Screen "screen1" (0)
[  1892.397] (**) |   |-->Monitor "monitor1"
[  1892.397] (**) |   |-->Device "device1"
[  1892.397] (**) |-->Input Device "Stylus1"
[  1892.397] (**) |-->Input Device "Eraser1"
[  1892.397] (**) |-->Input Device "Cursor1"
[  1892.397] (**) |-->Input Device "Pad1"
[  1892.397] (**) Option "DontZap" "False"
[  1892.397] (**) Option "AllowMouseOpenFail"
[  1892.397] (==) Automatically adding devices
[  1892.397] (==) Automatically enabling devices
[  1892.397] (==) Automatically adding GPU devices
[  1892.397] (==) Automatically binding GPU devices
[  1892.397] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1892.397] (==) FontPath set to:
   catalogue:/etc/X11/fontpath.d,
   built-ins
[  1892.397] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  1892.397] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1892.397] (II) Loader magic: 0x80ed80
[  1892.397] (II) Module ABI versions:
[  1892.397]    X.Org ANSI C Emulation: 0.4
[  1892.397]    X.Org Video Driver: 23.0
[  1892.397]    X.Org XInput driver : 24.1
[  1892.397]    X.Org Server Extension : 10.0
[  1892.397] (++) using VT number 1

[  1892.397] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1892.398] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1892.403] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1892.405] (--) PCI:*(0:0:2:0) 8086:1927:1b0a:01cf rev 10, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[  1892.405] (--) PCI: (0:1:0:0) 10de:13b1:1b0a:01cf rev 162, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00003000/128
[  1892.405] (II) Open ACPI successful (/var/run/acpid.socket)
[  1892.405] (II) "glx" will be loaded by default.
[  1892.405] (II) LoadModule: "v4l"
[  1892.405] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[  1892.405] (II) Module v4l: vendor="X.Org Foundation"
[  1892.405]    compiled for 1.19.2, module version = 0.1.1
[  1892.405]    ABI class: X.Org Video Driver, version 23.0
[  1892.405] (II) LoadModule: "glx"
[  1892.405] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  1892.406] (II) Module glx: vendor="X.Org Foundation"
[  1892.406]    compiled for 1.19.5, module version = 1.0.0
[  1892.406]    ABI class: X.Org Server Extension, version 10.0
[  1892.406] (II) LoadModule: "intel"
[  1892.406] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[  1892.406] (II) Module intel: vendor="X.Org Foundation"
[  1892.406]    compiled for 1.19.3, module version = 2.99.917
[  1892.406]    Module class: X.Org Video Driver
[  1892.406]    ABI class: X.Org Video Driver, version 23.0
[  1892.406] (II) LoadModule: "wacom"
[  1892.406] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so
[  1892.406] (II) Module wacom: vendor="X.Org Foundation"
[  1892.406]    compiled for 1.19.0, module version = 0.34.0
[  1892.406]    Module class: X.Org XInput Driver
[  1892.406]    ABI class: X.Org XInput driver, version 24.1
[  1892.406] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
   Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
   Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
   Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
   CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
   CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
   Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
   PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
   DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
   Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
   Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
   Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
   Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
   Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
   Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
   Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
   Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
   Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
   Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
   TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus  0x9F,
   TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
   TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
   TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
   TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
   usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
   usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
   usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
   usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
   usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
   usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
   usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
   usb:17ef:6004
[  1892.406] (II) v4l driver for Video4Linux overlay mode (V4L2)
[  1892.406] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  1892.406] (II) intel: Driver for Intel(R) HD Graphics
[  1892.406] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[  1892.406] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[  1892.406] (WW) Falling back to old probe method for v4l
[  1892.406] (II) v4l: Initiating device probe
[  1892.406] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[  1892.407] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris Graphics 550
[  1892.407] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[  1892.407] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[  1892.407] (==) intel(0): RGB weight 888
[  1892.407] (==) intel(0): Default visual is TrueColor
[  1892.409] (II) intel(0): Output eDP1 using monitor section monitor1
[  1892.409] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[  1892.409] (II) intel(0): Enabled output eDP1
[  1892.409] (II) intel(0): Output DP1 has no monitor section
[  1892.409] (II) intel(0): Enabled output DP1
[  1892.409] (II) intel(0): Output DP2 has no monitor section
[  1892.409] (II) intel(0): Enabled output DP2
[  1892.409] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[  1892.409] (II) intel(0): Output VIRTUAL1 has no monitor section
[  1892.409] (II) intel(0): Enabled output VIRTUAL1
[  1892.409] (--) intel(0): Output eDP1 using initial mode 3840x2160 on pipe 0
[  1892.410] (==) intel(0): TearFree disabled
[  1892.410] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[  1892.410] (==) intel(0): DPI set to (96, 96)
[  1892.410] (II) Loading sub module "dri3"
[  1892.410] (II) LoadModule: "dri3"
[  1892.410] (II) Module "dri3" already built-in
[  1892.410] (II) Loading sub module "dri2"
[  1892.410] (II) LoadModule: "dri2"
[  1892.410] (II) Module "dri2" already built-in
[  1892.410] (II) Loading sub module "present"
[  1892.410] (II) LoadModule: "present"
[  1892.410] (II) Module "present" already built-in
[  1892.410] (==) Depth 24 pixmap format is 32 bpp
[  1892.410] (II) intel(0): SNA initialized with Skylake (gen9) backend
[  1892.410] (==) intel(0): Backing store enabled
[  1892.410] (==) intel(0): Silken mouse enabled
[  1892.410] (II) intel(0): HW Cursor enabled
[  1892.410] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1892.410] (**) intel(0): DPMS enabled
[  1892.410] (==) intel(0): Display hotplug detection enabled
[  1892.488] (II) v4l: /dev/video0 open ok
[  1892.488] (EE) v4l: /dev/video0: no overlay support
[  1892.488] (II) v4l: /dev/video1 open ok
[  1892.488] (EE) v4l: /dev/video1: no overlay support
[  1892.488] (II) v4l: /dev/video2 open ok
[  1892.488] (EE) v4l: /dev/video2: no overlay support
[  1892.584] (II) v4l: /dev/video3 open ok
[  1892.584] (EE) v4l: /dev/video3: no overlay support
[  1892.584] (II) v4l: init done, 0 device(s) found
[  1892.585] (II) intel(0): [DRI2] Setup complete
[  1892.585] (II) intel(0): [DRI2]   DRI driver: i965
[  1892.585] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[  1892.585] (II) intel(0): direct rendering: DRI2 enabled
[  1892.585] (II) intel(0): hardware support for Present enabled
[  1892.585] (--) RandR disabled
[  1892.589] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1892.589] (II) AIGLX: enabled GLX_ARB_create_context
[  1892.589] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  1892.589] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  1892.589] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1892.589] (II) AIGLX: enabled GLX_SGI_swap_control
[  1892.589] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  1892.589] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  1892.589] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  1892.589] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1892.589] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  1892.589] (II) AIGLX: Loaded and initialized i965
[  1892.589] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1892.596] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1892.603] (II) intel(0): Setting screen physical size to 1016 x 571
[  1892.622] (II) Using input driver 'wacom' for 'Stylus1'
[  1892.622] (**) Option "SendCoreEvents"
[  1892.622] (**) Stylus1: always reports core events
[  1892.622] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[  1892.622] (**) Option "Type" "stylus"
[  1892.622] (--) Stylus1: using pressure threshold of 873 for button 1
[  1892.622] (--) Stylus1: maxX=34560 maxY=19440 maxZ=2047 resX=100000 resY=100000  tilt=enabled
[  1892.637] (II) XINPUT: Adding extended input device "Stylus1" (type: STYLUS, id 6)
[  1892.637] (**) Stylus1: (accel) keeping acceleration scheme 1
[  1892.637] (**) Stylus1: (accel) acceleration profile 0
[  1892.637] (**) Stylus1: (accel) acceleration factor: 2.000
[  1892.637] (**) Stylus1: (accel) acceleration threshold: 4
[  1892.637] (II) Using input driver 'wacom' for 'Eraser1'
[  1892.637] (**) Option "SendCoreEvents"
[  1892.637] (**) Eraser1: always reports core events
[  1892.637] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[  1892.637] (**) Option "Type" "eraser"
[  1892.637] (--) Eraser1: maxX=34560 maxY=19440 maxZ=2047 resX=100000 resY=100000  tilt=enabled
[  1892.646] (II) XINPUT: Adding extended input device "Eraser1" (type: ERASER, id 7)
[  1892.646] (**) Eraser1: (accel) keeping acceleration scheme 1
[  1892.646] (**) Eraser1: (accel) acceleration profile 0
[  1892.646] (**) Eraser1: (accel) acceleration factor: 2.000
[  1892.646] (**) Eraser1: (accel) acceleration threshold: 4
[  1892.646] (II) Using input driver 'wacom' for 'Cursor1'
[  1892.646] (**) Option "SendCoreEvents"
[  1892.646] (**) Cursor1: always reports core events
[  1892.646] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[  1892.646] (**) Option "Type" "cursor"
[  1892.654] (II) XINPUT: Adding extended input device "Cursor1" (type: CURSOR, id 8)
[  1892.654] (**) Cursor1: (accel) keeping acceleration scheme 1
[  1892.654] (**) Cursor1: (accel) acceleration profile 0
[  1892.654] (**) Cursor1: (accel) acceleration factor: 2.000
[  1892.654] (**) Cursor1: (accel) acceleration threshold: 4
[  1892.654] (II) Using input driver 'wacom' for 'Pad1'
[  1892.654] (**) Option "SendCoreEvents"
[  1892.654] (**) Pad1: always reports core events
[  1892.654] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[  1892.654] (**) Option "Type" "pad"
[  1892.662] (II) XINPUT: Adding extended input device "Pad1" (type: PAD, id 9)
[  1892.662] (**) Pad1: (accel) keeping acceleration scheme 1
[  1892.662] (**) Pad1: (accel) acceleration profile 0
[  1892.662] (**) Pad1: (accel) acceleration factor: 2.000
[  1892.662] (**) Pad1: (accel) acceleration threshold: 4
[  1892.667] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  1892.667] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1892.667] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1892.667] (II) LoadModule: "libinput"
[  1892.667] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[  1892.667] (II) Module libinput: vendor="X.Org Foundation"
[  1892.667]    compiled for 1.19.3, module version = 0.25.1
[  1892.667]    Module class: X.Org XInput Driver
[  1892.667]    ABI class: X.Org XInput driver, version 24.1
[  1892.667] (II) Using input driver 'libinput' for 'Power Button'
[  1892.667] (**) Power Button: always reports core events
[  1892.667] (**) Option "Device" "/dev/input/event4"
[  1892.668] (**) Option "_source" "server/udev"
[  1892.668] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1892.668] (II) event4  - (II) Power Button: (II) device is a keyboard
[  1892.668] (II) event4  - (II) Power Button: (II) device removed
[  1892.675] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[  1892.675] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[  1892.675] (**) Option "xkb_model" "pc105"
[  1892.675] (**) Option "xkb_layout" "de"
[  1892.675] (**) Option "xkb_variant" "nodeadkeys"
[  1892.675] (**) Option "xkb_options" "compose:rwin"
[  1892.687] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1892.687] (II) event4  - (II) Power Button: (II) device is a keyboard
[  1892.687] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  1892.687] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1892.687] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1892.687] (II) Using input driver 'libinput' for 'Video Bus'
[  1892.687] (**) Video Bus: always reports core events
[  1892.687] (**) Option "Device" "/dev/input/event5"
[  1892.687] (**) Option "_source" "server/udev"
[  1892.687] (II) event5  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1892.687] (II) event5  - (II) Video Bus: (II) device is a keyboard
[  1892.687] (II) event5  - (II) Video Bus: (II) device removed
[  1892.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[  1892.697] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 11)
[  1892.697] (**) Option "xkb_model" "pc105"
[  1892.697] (**) Option "xkb_layout" "de"
[  1892.697] (**) Option "xkb_variant" "nodeadkeys"
[  1892.697] (**) Option "xkb_options" "compose:rwin"
[  1892.697] (II) event5  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1892.697] (II) event5  - (II) Video Bus: (II) device is a keyboard
[  1892.697] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[  1892.697] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1892.697] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1892.697] (II) Using input driver 'libinput' for 'Video Bus'
[  1892.697] (**) Video Bus: always reports core events
[  1892.697] (**) Option "Device" "/dev/input/event6"
[  1892.697] (**) Option "_source" "server/udev"
[  1892.697] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1892.697] (II) event6  - (II) Video Bus: (II) device is a keyboard
[  1892.697] (II) event6  - (II) Video Bus: (II) device removed
[  1892.705] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:01/input/input6/event6"
[  1892.705] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 12)
[  1892.705] (**) Option "xkb_model" "pc105"
[  1892.705] (**) Option "xkb_layout" "de"
[  1892.705] (**) Option "xkb_variant" "nodeadkeys"
[  1892.705] (**) Option "xkb_options" "compose:rwin"
[  1892.705] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1892.705] (II) event6  - (II) Video Bus: (II) device is a keyboard
[  1892.705] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1892.705] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1892.705] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1892.705] (II) Using input driver 'libinput' for 'Power Button'
[  1892.705] (**) Power Button: always reports core events
[  1892.705] (**) Option "Device" "/dev/input/event2"
[  1892.705] (**) Option "_source" "server/udev"
[  1892.705] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1892.705] (II) event2  - (II) Power Button: (II) device is a keyboard
[  1892.705] (II) event2  - (II) Power Button: (II) device removed
[  1892.715] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[  1892.715] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 13)
[  1892.715] (**) Option "xkb_model" "pc105"
[  1892.715] (**) Option "xkb_layout" "de"
[  1892.715] (**) Option "xkb_variant" "nodeadkeys"
[  1892.715] (**) Option "xkb_options" "compose:rwin"
[  1892.715] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1892.715] (II) event2  - (II) Power Button: (II) device is a keyboard
[  1892.715] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[  1892.715] (II) No input driver specified, ignoring this device.
[  1892.715] (II) This device may have been added with another device file.
[  1892.715] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[  1892.715] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1892.715] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1892.715] (II) Using input driver 'libinput' for 'Sleep Button'
[  1892.715] (**) Sleep Button: always reports core events
[  1892.715] (**) Option "Device" "/dev/input/event1"
[  1892.715] (**) Option "_source" "server/udev"
[  1892.715] (II) event1  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1892.715] (II) event1  - (II) Sleep Button: (II) device is a keyboard
[  1892.715] (II) event1  - (II) Sleep Button: (II) device removed
[  1892.723] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[  1892.723] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 14)
[  1892.723] (**) Option "xkb_model" "pc105"
[  1892.723] (**) Option "xkb_layout" "de"
[  1892.723] (**) Option "xkb_variant" "nodeadkeys"
[  1892.723] (**) Option "xkb_options" "compose:rwin"
[  1892.723] (II) event1  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1892.723] (II) event1  - (II) Sleep Button: (II) device is a keyboard
[  1892.723] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event7)
[  1892.723] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[  1892.723] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall"
[  1892.723] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device'
[  1892.723] (**) HOLTEK Wireless USB Device: always reports core events
[  1892.723] (**) Option "Device" "/dev/input/event7"
[  1892.723] (**) Option "_source" "server/udev"
[  1892.724] (II) event7  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard
[  1892.724] (II) event7  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[  1892.724] (II) event7  - (II) HOLTEK Wireless USB Device: (II) device removed
[  1892.735] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04D9:A01C.0009/input/input7/event7"
[  1892.735] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 15)
[  1892.735] (**) Option "xkb_model" "pc105"
[  1892.735] (**) Option "xkb_layout" "de"
[  1892.735] (**) Option "xkb_variant" "nodeadkeys"
[  1892.735] (**) Option "xkb_options" "compose:rwin"
[  1892.735] (II) event7  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard
[  1892.735] (II) event7  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[  1892.735] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event8)
[  1892.735] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev pointer catchall"
[  1892.735] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[  1892.735] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput pointer catchall"
[  1892.735] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall"
[  1892.735] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device'
[  1892.735] (**) HOLTEK Wireless USB Device: always reports core events
[  1892.735] (**) Option "Device" "/dev/input/event8"
[  1892.735] (**) Option "_source" "server/udev"
[  1892.735] (II) event8  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard Mouse
[  1892.735] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a pointer
[  1892.735] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[  1892.735] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device removed
[  1892.743] (II) libinput: HOLTEK Wireless USB Device: needs a virtual subdevice
[  1892.743] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:A01C.000A/input/input8/event8"
[  1892.743] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: MOUSE, id 16)
[  1892.743] (**) Option "AccelerationScheme" "none"
[  1892.743] (**) HOLTEK Wireless USB Device: (accel) selected scheme none/0
[  1892.743] (**) HOLTEK Wireless USB Device: (accel) acceleration factor: 2.000
[  1892.743] (**) HOLTEK Wireless USB Device: (accel) acceleration threshold: 4
[  1892.743] (II) event8  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard Mouse
[  1892.743] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a pointer
[  1892.743] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[  1892.743] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/mouse0)
[  1892.743] (II) No input driver specified, ignoring this device.
[  1892.743] (II) This device may have been added with another device file.
[  1892.743] (II) config/udev: Adding input device USB Camera (/dev/input/event18)
[  1892.743] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[  1892.743] (**) USB Camera: Applying InputClass "libinput keyboard catchall"
[  1892.743] (II) Using input driver 'libinput' for 'USB Camera'
[  1892.743] (**) USB Camera: always reports core events
[  1892.743] (**) Option "Device" "/dev/input/event18"
[  1892.743] (**) Option "_source" "server/udev"
[  1892.744] (II) event18 - (II) USB Camera: (II) is tagged by udev as: Keyboard
[  1892.744] (II) event18 - (II) USB Camera: (II) device is a keyboard
[  1892.744] (II) event18 - (II) USB Camera: (II) device removed
[  1892.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18/event18"
[  1892.763] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 17)
[  1892.763] (**) Option "xkb_model" "pc105"
[  1892.763] (**) Option "xkb_layout" "de"
[  1892.763] (**) Option "xkb_variant" "nodeadkeys"
[  1892.763] (**) Option "xkb_options" "compose:rwin"
[  1892.763] (II) event18 - (II) USB Camera: (II) is tagged by udev as: Keyboard
[  1892.763] (II) event18 - (II) USB Camera: (II) device is a keyboard
[  1892.763] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen (/dev/input/event20)
[  1892.763] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "evdev tablet catchall"
[  1892.763] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "libinput tablet catchall"
[  1892.763] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "Wacom USB tablet class"
[  1892.763] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "Wacom tablet class"
[  1892.763] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen'
[  1892.763] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: always reports core events
[  1892.763] (**) Option "Device" "/dev/input/event20"
[  1892.763] (WW) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: device file already in use by Eraser1. Ignoring.
[  1892.763] (EE) PreInit returned 8 for "Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen"
[  1892.763] (II) UnloadModule: "wacom"
[  1892.763] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen (/dev/input/mouse2)
[  1892.763] (II) No input driver specified, ignoring this device.
[  1892.763] (II) This device may have been added with another device file.
[  1892.764] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger (/dev/input/event19)
[  1892.764] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "evdev touchscreen catchall"
[  1892.764] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "libinput touchscreen catchall"
[  1892.764] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "Wacom USB touchscreen class"
[  1892.764] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "Wacom touchscreen class"
[  1892.764] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger'
[  1892.764] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: always reports core events
[  1892.764] (**) Option "Device" "/dev/input/event19"
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Invalid type 'stylus' for this device.
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Invalid type 'eraser' for this device.
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Invalid type 'cursor' for this device.
[  1892.764] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: type not specified, assuming 'touch'.
[  1892.764] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: other types will be automatically added.
[  1892.764] (--) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: maxX=13824 maxY=7776 maxZ=0 resX=40000 resY=40000
[  1892.764] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: hotplugging dependent devices.
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'stylus' for this device.
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'eraser' for this device.
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'cursor' for this device.
[  1892.764] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'pad' for this device.
[  1892.764] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: hotplugging completed.
[  1892.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/0003:056A:034B.000B/input/input20/event19"
[  1892.783] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch" (type: TOUCH, id 18)
[  1892.783] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) keeping acceleration scheme 1
[  1892.783] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) acceleration profile 0
[  1892.783] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) acceleration factor: 2.000
[  1892.783] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) acceleration threshold: 4
[  1892.783] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger (/dev/input/mouse1)
[  1892.783] (II) No input driver specified, ignoring this device.
[  1892.783] (II) This device may have been added with another device file.
[  1892.784] (II) config/udev: Adding input device Intel RealSense 3D Camera R200 (/dev/input/event10)
[  1892.784] (**) Intel RealSense 3D Camera R200: Applying InputClass "evdev keyboard catchall"
[  1892.784] (**) Intel RealSense 3D Camera R200: Applying InputClass "libinput keyboard catchall"
[  1892.784] (II) Using input driver 'libinput' for 'Intel RealSense 3D Camera R200'
[  1892.784] (**) Intel RealSense 3D Camera R200: always reports core events
[  1892.784] (**) Option "Device" "/dev/input/event10"
[  1892.784] (**) Option "_source" "server/udev"
[  1892.784] (II) event10 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[  1892.784] (II) event10 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[  1892.784] (II) event10 - (II) Intel RealSense 3D Camera R200: (II) device removed
[  1892.803] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/input/input10/event10"
[  1892.803] (II) XINPUT: Adding extended input device "Intel RealSense 3D Camera R200" (type: KEYBOARD, id 19)
[  1892.803] (**) Option "xkb_model" "pc105"
[  1892.803] (**) Option "xkb_layout" "de"
[  1892.803] (**) Option "xkb_variant" "nodeadkeys"
[  1892.803] (**) Option "xkb_options" "compose:rwin"
[  1892.803] (II) event10 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[  1892.803] (II) event10 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[  1892.803] (II) config/udev: Adding input device Intel RealSense 3D Camera R200 (/dev/input/event11)
[  1892.803] (**) Intel RealSense 3D Camera R200: Applying InputClass "evdev keyboard catchall"
[  1892.803] (**) Intel RealSense 3D Camera R200: Applying InputClass "libinput keyboard catchall"
[  1892.803] (II) Using input driver 'libinput' for 'Intel RealSense 3D Camera R200'
[  1892.803] (**) Intel RealSense 3D Camera R200: always reports core events
[  1892.803] (**) Option "Device" "/dev/input/event11"
[  1892.803] (**) Option "_source" "server/udev"
[  1892.804] (II) event11 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[  1892.804] (II) event11 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[  1892.804] (II) event11 - (II) Intel RealSense 3D Camera R200: (II) device removed
[  1892.823] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.4/input/input11/event11"
[  1892.823] (II) XINPUT: Adding extended input device "Intel RealSense 3D Camera R200" (type: KEYBOARD, id 20)
[  1892.823] (**) Option "xkb_model" "pc105"
[  1892.823] (**) Option "xkb_layout" "de"
[  1892.823] (**) Option "xkb_variant" "nodeadkeys"
[  1892.823] (**) Option "xkb_options" "compose:rwin"
[  1892.823] (II) event11 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[  1892.823] (II) event11 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[  1892.824] (II) config/udev: Adding input device em28xx IR (em2884 #0) (/dev/input/event17)
[  1892.824] (**) em28xx IR (em2884 #0): Applying InputClass "evdev keyboard catchall"
[  1892.824] (**) em28xx IR (em2884 #0): Applying InputClass "libinput keyboard catchall"
[  1892.824] (II) Using input driver 'libinput' for 'em28xx IR (em2884 #0)'
[  1892.824] (**) em28xx IR (em2884 #0): always reports core events
[  1892.824] (**) Option "Device" "/dev/input/event17"
[  1892.824] (**) Option "_source" "server/udev"
[  1892.824] (II) event17 - (II) em28xx IR (em2884 #0): (II) is tagged by udev as: Keyboard
[  1892.824] (II) event17 - (II) em28xx IR (em2884 #0): (II) device is a keyboard
[  1892.824] (II) event17 - (II) em28xx IR (em2884 #0): (II) device removed
[  1892.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/0000:03:00.0/usb3/3-2/3-2.4/3-2.4.4/rc/rc0/input17/event17"
[  1892.835] (II) XINPUT: Adding extended input device "em28xx IR (em2884 #0)" (type: KEYBOARD, id 21)
[  1892.835] (**) Option "xkb_model" "pc105"
[  1892.835] (**) Option "xkb_layout" "de"
[  1892.835] (**) Option "xkb_variant" "nodeadkeys"
[  1892.835] (**) Option "xkb_options" "compose:rwin"
[  1892.835] (II) event17 - (II) em28xx IR (em2884 #0): (II) is tagged by udev as: Keyboard
[  1892.835] (II) event17 - (II) em28xx IR (em2884 #0): (II) device is a keyboard
[  1892.835] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[  1892.835] (II) No input driver specified, ignoring this device.
[  1892.835] (II) This device may have been added with another device file.
[  1892.836] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[  1892.836] (II) No input driver specified, ignoring this device.
[  1892.836] (II) This device may have been added with another device file.
[  1892.836] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[  1892.836] (II) No input driver specified, ignoring this device.
[  1892.836] (II) This device may have been added with another device file.
[  1892.836] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[  1892.836] (II) No input driver specified, ignoring this device.
[  1892.836] (II) This device may have been added with another device file.
[  1892.836] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[  1892.836] (II) No input driver specified, ignoring this device.
[  1892.836] (II) This device may have been added with another device file.
[  1892.836] (II) config/udev: Adding input device Intel HID events (/dev/input/event9)
[  1892.836] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[  1892.836] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[  1892.836] (II) Using input driver 'libinput' for 'Intel HID events'
[  1892.836] (**) Intel HID events: always reports core events
[  1892.836] (**) Option "Device" "/dev/input/event9"
[  1892.836] (**) Option "_source" "server/udev"
[  1892.836] (II) event9  - (II) Intel HID events: (II) is tagged by udev as: Keyboard
[  1892.836] (II) event9  - (II) Intel HID events: (II) device is a keyboard
[  1892.836] (II) event9  - (II) Intel HID events: (II) device removed
[  1892.847] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input9/event9"
[  1892.847] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 22)
[  1892.847] (**) Option "xkb_model" "pc105"
[  1892.847] (**) Option "xkb_layout" "de"
[  1892.847] (**) Option "xkb_variant" "nodeadkeys"
[  1892.847] (**) Option "xkb_options" "compose:rwin"
[  1892.847] (II) event9  - (II) Intel HID events: (II) is tagged by udev as: Keyboard
[  1892.847] (II) event9  - (II) Intel HID events: (II) device is a keyboard
[  1892.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1892.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1892.847] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1892.847] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1892.847] (**) AT Translated Set 2 keyboard: always reports core events
[  1892.847] (**) Option "Device" "/dev/input/event0"
[  1892.847] (**) Option "_source" "server/udev"
[  1892.848] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1892.848] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1892.848] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  1892.859] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1892.859] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 23)
[  1892.859] (**) Option "xkb_model" "pc105"
[  1892.859] (**) Option "xkb_layout" "de"
[  1892.859] (**) Option "xkb_variant" "nodeadkeys"
[  1892.859] (**) Option "xkb_options" "compose:rwin"
[  1892.859] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1892.859] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1892.870] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev pointer catchall"
[  1892.870] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[  1892.870] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput pointer catchall"
[  1892.870] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall"
[  1892.870] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device'
[  1892.870] (**) HOLTEK Wireless USB Device: always reports core events
[  1892.870] (**) Option "Device" "/dev/input/event8"
[  1892.870] (**) Option "_source" "_driver/libinput"
[  1892.870] (II) libinput: HOLTEK Wireless USB Device: is a virtual subdevice
[  1892.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:A01C.000A/input/input8/event8"
[  1892.870] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 24)
[  1892.870] (**) Option "xkb_model" "pc105"
[  1892.870] (**) Option "xkb_layout" "de"
[  1892.870] (**) Option "xkb_variant" "nodeadkeys"
[  1892.870] (**) Option "xkb_options" "compose:rwin"
[  1894.410] (II) intel(0): EDID vendor "WAC", prod id 4179
[  1894.410] (II) intel(0): Using hsync ranges from config file
[  1894.410] (II) intel(0): Using vrefresh ranges from config file
[  1894.410] (II) intel(0): Printing DDC gathered Modelines:
[  1894.410] (II) intel(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[  1894.410] (II) intel(0): Modeline "3840x2160"x0.0  594.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (135.0 kHz e)
[  1894.410] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1894.410] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1894.410] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1894.410] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[  1894.410] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[  1894.410] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[  1894.410] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[  1894.410] (II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[  1894.410] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1894.410] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[  1894.411] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  1902.455] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 17th, '17, 21:32

Ich hab zur Probe versucht anstatt des wacom den Treiber libinput zu nutzen, aber auch der wird laut xorg.log wieder entladen:
Code: Alles auswählen
[    34.742] (--) Log file renamed from "/var/log/Xorg.pid-5425.log" to "/var/log/Xorg.0.log"
[    34.742]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    34.742] X Protocol Version 11, Revision 0
[    34.742] Build Operating System: ecosse 4.4.88-server-1.mga5
[    34.742] Current Operating System: Linux localhost.localdomain 4.9.56-desktop-1.mga6 #1 SMP Thu Oct 12 22:55:31 UTC 2017 x86_64
[    34.742] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.56-desktop-1.mga6 root=UUID=74eecab5-6c8c-4273-9f07-2ae7bf050bf5 ro splash quiet noiswmd resume=UUID=19e57a1f-631e-4033-986b-682f86016a00 audit=0
[    34.742] Build Date: 13 October 2017  04:36:29PM
[    34.742] Build ID: x11-server 1.19.5-1.1.mga6
[    34.742] Current version of pixman: 0.34.0
[    34.742]    Before reporting problems, check https://bugs.mageia.org
   to make sure that you have the latest version.
[    34.742] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.742] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 17 20:15:27 2017
[    34.744] (==) Using config file: "/etc/X11/xorg.conf"
[    34.744] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    34.748] (==) ServerLayout "layout1"
[    34.748] (**) |-->Screen "screen1" (0)
[    34.748] (**) |   |-->Monitor "monitor1"
[    34.748] (**) |   |-->Device "device1"
[    34.748] (**) |-->Input Device "Stylus1"
[    34.748] (**) |-->Input Device "Eraser1"
[    34.748] (**) |-->Input Device "Cursor1"
[    34.748] (**) |-->Input Device "Pad1"
[    34.748] (**) Option "DontZap" "False"
[    34.748] (**) Option "AllowMouseOpenFail"
[    34.748] (==) Automatically adding devices
[    34.748] (==) Automatically enabling devices
[    34.748] (==) Automatically adding GPU devices
[    34.748] (==) Automatically binding GPU devices
[    34.748] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    34.748] (==) FontPath set to:
   catalogue:/etc/X11/fontpath.d,
   built-ins
[    34.748] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    34.748] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    34.748] (II) Loader magic: 0x80ed80
[    34.748] (II) Module ABI versions:
[    34.748]    X.Org ANSI C Emulation: 0.4
[    34.748]    X.Org Video Driver: 23.0
[    34.748]    X.Org XInput driver : 24.1
[    34.748]    X.Org Server Extension : 10.0
[    34.749] (++) using VT number 1

[    34.749] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    34.749] (II) xfree86: Adding drm device (/dev/dri/card0)
[    34.761] (II) xfree86: Adding drm device (/dev/dri/card1)
[    34.764] (--) PCI:*(0:0:2:0) 8086:1927:1b0a:01cf rev 10, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    34.765] (--) PCI: (0:1:0:0) 10de:13b1:1b0a:01cf rev 162, Mem @ 0xa3000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00003000/128
[    34.765] (II) Open ACPI successful (/var/run/acpid.socket)
[    34.765] (II) "glx" will be loaded by default.
[    34.765] (II) LoadModule: "v4l"
[    34.767] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[    34.767] (II) Module v4l: vendor="X.Org Foundation"
[    34.767]    compiled for 1.19.2, module version = 0.1.1
[    34.767]    ABI class: X.Org Video Driver, version 23.0
[    34.768] (II) LoadModule: "glx"
[    34.768] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    34.771] (II) Module glx: vendor="X.Org Foundation"
[    34.771]    compiled for 1.19.5, module version = 1.0.0
[    34.771]    ABI class: X.Org Server Extension, version 10.0
[    34.771] (II) LoadModule: "intel"
[    34.771] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    34.774] (II) Module intel: vendor="X.Org Foundation"
[    34.774]    compiled for 1.19.3, module version = 2.99.917
[    34.774]    Module class: X.Org Video Driver
[    34.774]    ABI class: X.Org Video Driver, version 23.0
[    34.774] (II) LoadModule: "libinput"
[    34.775] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[    34.778] (II) Module libinput: vendor="X.Org Foundation"
[    34.778]    compiled for 1.19.3, module version = 0.25.1
[    34.778]    Module class: X.Org XInput Driver
[    34.778]    ABI class: X.Org XInput driver, version 24.1
[    34.778] (II) v4l driver for Video4Linux overlay mode (V4L2)
[    34.778] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
   i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
   915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
   Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    34.779] (II) intel: Driver for Intel(R) HD Graphics
[    34.779] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    34.779] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    34.779] (WW) Falling back to old probe method for v4l
[    34.779] (II) v4l: Initiating device probe
[    34.779] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[    34.781] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris Graphics 550
[    34.781] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    34.781] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    34.781] (==) intel(0): RGB weight 888
[    34.781] (==) intel(0): Default visual is TrueColor
[    34.781] (II) intel(0): Output eDP1 using monitor section monitor1
[    34.781] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    34.781] (II) intel(0): Enabled output eDP1
[    34.781] (II) intel(0): Output DP1 has no monitor section
[    34.782] (II) intel(0): Enabled output DP1
[    34.782] (II) intel(0): Output DP2 has no monitor section
[    34.782] (II) intel(0): Enabled output DP2
[    34.782] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    34.782] (II) intel(0): Output VIRTUAL1 has no monitor section
[    34.782] (II) intel(0): Enabled output VIRTUAL1
[    34.782] (--) intel(0): Output eDP1 using initial mode 3840x2160 on pipe 0
[    34.782] (==) intel(0): TearFree disabled
[    34.782] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    34.782] (==) intel(0): DPI set to (96, 96)
[    34.782] (II) Loading sub module "dri3"
[    34.782] (II) LoadModule: "dri3"
[    34.782] (II) Module "dri3" already built-in
[    34.782] (II) Loading sub module "dri2"
[    34.782] (II) LoadModule: "dri2"
[    34.782] (II) Module "dri2" already built-in
[    34.782] (II) Loading sub module "present"
[    34.782] (II) LoadModule: "present"
[    34.782] (II) Module "present" already built-in
[    34.782] (==) Depth 24 pixmap format is 32 bpp
[    34.785] (II) intel(0): SNA initialized with Skylake (gen9) backend
[    34.785] (==) intel(0): Backing store enabled
[    34.785] (==) intel(0): Silken mouse enabled
[    34.785] (II) intel(0): HW Cursor enabled
[    34.785] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    34.786] (**) intel(0): DPMS enabled
[    34.786] (==) intel(0): Display hotplug detection enabled
[    34.864] (II) v4l: /dev/video0 open ok
[    34.864] (EE) v4l: /dev/video0: no overlay support
[    34.864] (II) v4l: /dev/video1 open ok
[    34.864] (EE) v4l: /dev/video1: no overlay support
[    34.864] (II) v4l: /dev/video2 open ok
[    34.864] (EE) v4l: /dev/video2: no overlay support
[    34.961] (II) v4l: /dev/video3 open ok
[    34.961] (EE) v4l: /dev/video3: no overlay support
[    34.961] (II) v4l: init done, 0 device(s) found
[    34.961] (II) intel(0): [DRI2] Setup complete
[    34.961] (II) intel(0): [DRI2]   DRI driver: i965
[    34.961] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    34.961] (II) intel(0): direct rendering: DRI2 enabled
[    34.961] (II) intel(0): hardware support for Present enabled
[    34.961] (--) RandR disabled
[    34.987] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    34.987] (II) AIGLX: enabled GLX_ARB_create_context
[    34.987] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    34.987] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    34.987] (II) AIGLX: enabled GLX_INTEL_swap_event
[    34.987] (II) AIGLX: enabled GLX_SGI_swap_control
[    34.987] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    34.987] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    34.987] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    34.987] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    34.987] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    34.987] (II) AIGLX: Loaded and initialized i965
[    34.987] (II) GLX: Initialized DRI2 GL provider for screen 0
[    34.994] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    35.011] (II) intel(0): Setting screen physical size to 1016 x 571
[    35.058] (II) Using input driver 'libinput' for 'Stylus1'
[    35.058] (**) Option "SendCoreEvents"
[    35.058] (**) Stylus1: always reports core events
[    35.058] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[    35.058] (EE) Failed to look up path '/dev/input/event10'
[    35.058] (II) event10: opening input device '/dev/input/event10' failed (No such device).
[    35.058] (II) event10 - failed to create input device '/dev/input/event10'.
[    35.058] (EE) libinput: Stylus1: Failed to create a device for /dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse
[    35.058] (EE) PreInit returned 2 for "Stylus1"
[    35.058] (II) UnloadModule: "libinput"
[    35.058] (II) Using input driver 'libinput' for 'Eraser1'
[    35.058] (**) Option "SendCoreEvents"
[    35.058] (**) Eraser1: always reports core events
[    35.058] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[    35.058] (EE) Failed to look up path '/dev/input/event10'
[    35.058] (II) event10: opening input device '/dev/input/event10' failed (No such device).
[    35.058] (II) event10 - failed to create input device '/dev/input/event10'.
[    35.058] (EE) libinput: Eraser1: Failed to create a device for /dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse
[    35.058] (EE) PreInit returned 2 for "Eraser1"
[    35.058] (II) UnloadModule: "libinput"
[    35.058] (II) Using input driver 'libinput' for 'Cursor1'
[    35.058] (**) Option "SendCoreEvents"
[    35.058] (**) Cursor1: always reports core events
[    35.058] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[    35.058] (EE) Failed to look up path '/dev/input/event10'
[    35.058] (II) event10: opening input device '/dev/input/event10' failed (No such device).
[    35.058] (II) event10 - failed to create input device '/dev/input/event10'.
[    35.058] (EE) libinput: Cursor1: Failed to create a device for /dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse
[    35.058] (EE) PreInit returned 2 for "Cursor1"
[    35.058] (II) UnloadModule: "libinput"
[    35.058] (II) Using input driver 'libinput' for 'Pad1'
[    35.058] (**) Option "SendCoreEvents"
[    35.058] (**) Pad1: always reports core events
[    35.058] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
[    35.058] (EE) Failed to look up path '/dev/input/event10'
[    35.058] (II) event10: opening input device '/dev/input/event10' failed (No such device).
[    35.058] (II) event10 - failed to create input device '/dev/input/event10'.
[    35.058] (EE) libinput: Pad1: Failed to create a device for /dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse
[    35.058] (EE) PreInit returned 2 for "Pad1"
[    35.058] (II) UnloadModule: "libinput"
[    35.064] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    35.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    35.064] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    35.064] (II) Using input driver 'libinput' for 'Power Button'
[    35.064] (**) Power Button: always reports core events
[    35.064] (**) Option "Device" "/dev/input/event4"
[    35.064] (**) Option "_source" "server/udev"
[    35.064] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    35.064] (II) event4  - (II) Power Button: (II) device is a keyboard
[    35.064] (II) event4  - (II) Power Button: (II) device removed
[    35.069] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    35.069] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    35.069] (**) Option "xkb_model" "pc105"
[    35.069] (**) Option "xkb_layout" "de"
[    35.069] (**) Option "xkb_variant" "nodeadkeys"
[    35.069] (**) Option "xkb_options" "compose:rwin"
[    35.085] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    35.085] (II) event4  - (II) Power Button: (II) device is a keyboard
[    35.085] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    35.085] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    35.085] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    35.085] (II) Using input driver 'libinput' for 'Video Bus'
[    35.085] (**) Video Bus: always reports core events
[    35.085] (**) Option "Device" "/dev/input/event5"
[    35.085] (**) Option "_source" "server/udev"
[    35.085] (II) event5  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    35.085] (II) event5  - (II) Video Bus: (II) device is a keyboard
[    35.085] (II) event5  - (II) Video Bus: (II) device removed
[    35.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    35.090] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    35.090] (**) Option "xkb_model" "pc105"
[    35.090] (**) Option "xkb_layout" "de"
[    35.090] (**) Option "xkb_variant" "nodeadkeys"
[    35.090] (**) Option "xkb_options" "compose:rwin"
[    35.090] (II) event5  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    35.090] (II) event5  - (II) Video Bus: (II) device is a keyboard
[    35.090] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    35.090] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    35.090] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    35.090] (II) Using input driver 'libinput' for 'Video Bus'
[    35.090] (**) Video Bus: always reports core events
[    35.090] (**) Option "Device" "/dev/input/event6"
[    35.090] (**) Option "_source" "server/udev"
[    35.091] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    35.091] (II) event6  - (II) Video Bus: (II) device is a keyboard
[    35.091] (II) event6  - (II) Video Bus: (II) device removed
[    35.095] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:01/input/input6/event6"
[    35.095] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    35.095] (**) Option "xkb_model" "pc105"
[    35.095] (**) Option "xkb_layout" "de"
[    35.095] (**) Option "xkb_variant" "nodeadkeys"
[    35.095] (**) Option "xkb_options" "compose:rwin"
[    35.095] (II) event6  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    35.095] (II) event6  - (II) Video Bus: (II) device is a keyboard
[    35.095] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    35.095] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    35.095] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    35.095] (II) Using input driver 'libinput' for 'Power Button'
[    35.095] (**) Power Button: always reports core events
[    35.095] (**) Option "Device" "/dev/input/event2"
[    35.095] (**) Option "_source" "server/udev"
[    35.095] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    35.095] (II) event2  - (II) Power Button: (II) device is a keyboard
[    35.095] (II) event2  - (II) Power Button: (II) device removed
[    35.101] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    35.101] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    35.101] (**) Option "xkb_model" "pc105"
[    35.101] (**) Option "xkb_layout" "de"
[    35.101] (**) Option "xkb_variant" "nodeadkeys"
[    35.101] (**) Option "xkb_options" "compose:rwin"
[    35.101] (II) event2  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    35.101] (II) event2  - (II) Power Button: (II) device is a keyboard
[    35.101] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    35.101] (II) No input driver specified, ignoring this device.
[    35.101] (II) This device may have been added with another device file.
[    35.101] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    35.101] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    35.101] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    35.101] (II) Using input driver 'libinput' for 'Sleep Button'
[    35.101] (**) Sleep Button: always reports core events
[    35.101] (**) Option "Device" "/dev/input/event1"
[    35.101] (**) Option "_source" "server/udev"
[    35.102] (II) event1  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    35.102] (II) event1  - (II) Sleep Button: (II) device is a keyboard
[    35.102] (II) event1  - (II) Sleep Button: (II) device removed
[    35.109] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    35.109] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    35.109] (**) Option "xkb_model" "pc105"
[    35.109] (**) Option "xkb_layout" "de"
[    35.109] (**) Option "xkb_variant" "nodeadkeys"
[    35.109] (**) Option "xkb_options" "compose:rwin"
[    35.109] (II) event1  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    35.109] (II) event1  - (II) Sleep Button: (II) device is a keyboard
[    35.109] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event7)
[    35.109] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[    35.109] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall"
[    35.109] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device'
[    35.109] (**) HOLTEK Wireless USB Device: always reports core events
[    35.109] (**) Option "Device" "/dev/input/event7"
[    35.109] (**) Option "_source" "server/udev"
[    35.110] (II) event7  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard
[    35.110] (II) event7  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[    35.110] (II) event7  - (II) HOLTEK Wireless USB Device: (II) device removed
[    35.113] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04D9:A01C.0009/input/input7/event7"
[    35.113] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 11)
[    35.113] (**) Option "xkb_model" "pc105"
[    35.113] (**) Option "xkb_layout" "de"
[    35.113] (**) Option "xkb_variant" "nodeadkeys"
[    35.113] (**) Option "xkb_options" "compose:rwin"
[    35.113] (II) event7  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard
[    35.113] (II) event7  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[    35.113] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/event8)
[    35.113] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev pointer catchall"
[    35.113] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[    35.113] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput pointer catchall"
[    35.113] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall"
[    35.113] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device'
[    35.113] (**) HOLTEK Wireless USB Device: always reports core events
[    35.113] (**) Option "Device" "/dev/input/event8"
[    35.113] (**) Option "_source" "server/udev"
[    35.114] (II) event8  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard Mouse
[    35.114] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a pointer
[    35.114] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[    35.114] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device removed
[    35.120] (II) libinput: HOLTEK Wireless USB Device: needs a virtual subdevice
[    35.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:A01C.000A/input/input8/event8"
[    35.120] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: MOUSE, id 12)
[    35.120] (**) Option "AccelerationScheme" "none"
[    35.120] (**) HOLTEK Wireless USB Device: (accel) selected scheme none/0
[    35.120] (**) HOLTEK Wireless USB Device: (accel) acceleration factor: 2.000
[    35.120] (**) HOLTEK Wireless USB Device: (accel) acceleration threshold: 4
[    35.120] (II) event8  - (II) HOLTEK Wireless USB Device: (II) is tagged by udev as: Keyboard Mouse
[    35.120] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a pointer
[    35.120] (II) event8  - (II) HOLTEK Wireless USB Device: (II) device is a keyboard
[    35.120] (II) config/udev: Adding input device HOLTEK Wireless USB Device (/dev/input/mouse0)
[    35.120] (II) No input driver specified, ignoring this device.
[    35.120] (II) This device may have been added with another device file.
[    35.121] (II) config/udev: Adding input device USB Camera (/dev/input/event14)
[    35.121] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[    35.121] (**) USB Camera: Applying InputClass "libinput keyboard catchall"
[    35.121] (II) Using input driver 'libinput' for 'USB Camera'
[    35.121] (**) USB Camera: always reports core events
[    35.121] (**) Option "Device" "/dev/input/event14"
[    35.121] (**) Option "_source" "server/udev"
[    35.121] (II) event14 - (II) USB Camera: (II) is tagged by udev as: Keyboard
[    35.121] (II) event14 - (II) USB Camera: (II) device is a keyboard
[    35.121] (II) event14 - (II) USB Camera: (II) device removed
[    35.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18/event14"
[    35.134] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 13)
[    35.134] (**) Option "xkb_model" "pc105"
[    35.134] (**) Option "xkb_layout" "de"
[    35.134] (**) Option "xkb_variant" "nodeadkeys"
[    35.134] (**) Option "xkb_options" "compose:rwin"
[    35.134] (II) event14 - (II) USB Camera: (II) is tagged by udev as: Keyboard
[    35.134] (II) event14 - (II) USB Camera: (II) device is a keyboard
[    35.134] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen (/dev/input/event10)
[    35.134] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "evdev tablet catchall"
[    35.134] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "libinput tablet catchall"
[    35.134] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "Wacom USB tablet class"
[    35.134] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: Applying InputClass "Wacom tablet class"
[    35.134] (II) LoadModule: "wacom"
[    35.134] (II) Loading /usr/lib64/xorg/modules/input/wacom_drv.so
[    35.135] (II) Module wacom: vendor="X.Org Foundation"
[    35.136]    compiled for 1.19.0, module version = 0.34.0
[    35.136]    Module class: X.Org XInput Driver
[    35.136]    ABI class: X.Org XInput driver, version 24.1
[    35.136] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
   Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
   Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
   Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
   CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
   CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
   Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
   PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
   DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
   Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
   Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
   Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
   Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
   Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
   Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
   Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
   Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
   Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
   Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
   TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus  0x9F,
   TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
   TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
   TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
   TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
   usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
   usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
   usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
   usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
   usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
   usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
   usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
   usb:17ef:6004
[    35.136] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen'
[    35.136] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: always reports core events
[    35.136] (**) Option "Device" "/dev/input/event10"
[    35.136] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: type not specified, assuming 'stylus'.
[    35.136] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen: other types will be automatically added.
[    35.136] (--) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: using pressure threshold of 873 for button 1
[    35.136] (--) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: maxX=34560 maxY=19440 maxZ=2047 resX=100000 resY=100000  tilt=enabled
[    35.136] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: hotplugging dependent devices.
[    35.136] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: Invalid type 'cursor' for this device.
[    35.136] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: Invalid type 'touch' for this device.
[    35.136] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: Invalid type 'pad' for this device.
[    35.136] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: hotplugging completed.
[    35.147] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:056A:034E.000D/input/input12/event10"
[    35.147] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus" (type: STYLUS, id 14)
[    35.147] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: (accel) keeping acceleration scheme 1
[    35.147] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: (accel) acceleration profile 0
[    35.147] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: (accel) acceleration factor: 2.000
[    35.147] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen stylus: (accel) acceleration threshold: 4
[    35.147] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen (/dev/input/mouse2)
[    35.147] (II) No input driver specified, ignoring this device.
[    35.147] (II) This device may have been added with another device file.
[    35.148] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger (/dev/input/event9)
[    35.148] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "evdev touchscreen catchall"
[    35.148] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "libinput touchscreen catchall"
[    35.148] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "Wacom USB touchscreen class"
[    35.148] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Applying InputClass "Wacom touchscreen class"
[    35.148] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger'
[    35.148] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: always reports core events
[    35.148] (**) Option "Device" "/dev/input/event9"
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Invalid type 'stylus' for this device.
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Invalid type 'eraser' for this device.
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: Invalid type 'cursor' for this device.
[    35.148] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: type not specified, assuming 'touch'.
[    35.148] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger: other types will be automatically added.
[    35.148] (--) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: maxX=13824 maxY=7776 maxZ=0 resX=40000 resY=40000
[    35.148] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: hotplugging dependent devices.
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'stylus' for this device.
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'eraser' for this device.
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'cursor' for this device.
[    35.148] (EE) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: Invalid type 'pad' for this device.
[    35.148] (II) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: hotplugging completed.
[    35.159] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.3/1-6.3:1.0/0003:056A:034B.000B/input/input10/event9"
[    35.159] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch" (type: TOUCH, id 15)
[    35.159] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) keeping acceleration scheme 1
[    35.159] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) acceleration profile 0
[    35.159] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) acceleration factor: 2.000
[    35.159] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch: (accel) acceleration threshold: 4
[    35.159] (II) config/udev: Adding input device Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger (/dev/input/mouse1)
[    35.159] (II) No input driver specified, ignoring this device.
[    35.159] (II) This device may have been added with another device file.
[    35.159] (II) config/udev: Adding input device Intel RealSense 3D Camera R200 (/dev/input/event12)
[    35.159] (**) Intel RealSense 3D Camera R200: Applying InputClass "evdev keyboard catchall"
[    35.159] (**) Intel RealSense 3D Camera R200: Applying InputClass "libinput keyboard catchall"
[    35.159] (II) Using input driver 'libinput' for 'Intel RealSense 3D Camera R200'
[    35.159] (**) Intel RealSense 3D Camera R200: always reports core events
[    35.159] (**) Option "Device" "/dev/input/event12"
[    35.159] (**) Option "_source" "server/udev"
[    35.159] (II) event12 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[    35.160] (II) event12 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[    35.160] (II) event12 - (II) Intel RealSense 3D Camera R200: (II) device removed
[    35.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/input/input16/event12"
[    35.176] (II) XINPUT: Adding extended input device "Intel RealSense 3D Camera R200" (type: KEYBOARD, id 16)
[    35.176] (**) Option "xkb_model" "pc105"
[    35.176] (**) Option "xkb_layout" "de"
[    35.176] (**) Option "xkb_variant" "nodeadkeys"
[    35.176] (**) Option "xkb_options" "compose:rwin"
[    35.176] (II) event12 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[    35.176] (II) event12 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[    35.176] (II) config/udev: Adding input device Intel RealSense 3D Camera R200 (/dev/input/event13)
[    35.176] (**) Intel RealSense 3D Camera R200: Applying InputClass "evdev keyboard catchall"
[    35.176] (**) Intel RealSense 3D Camera R200: Applying InputClass "libinput keyboard catchall"
[    35.176] (II) Using input driver 'libinput' for 'Intel RealSense 3D Camera R200'
[    35.176] (**) Intel RealSense 3D Camera R200: always reports core events
[    35.176] (**) Option "Device" "/dev/input/event13"
[    35.176] (**) Option "_source" "server/udev"
[    35.176] (II) event13 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[    35.176] (II) event13 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[    35.176] (II) event13 - (II) Intel RealSense 3D Camera R200: (II) device removed
[    35.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.4/input/input17/event13"
[    35.192] (II) XINPUT: Adding extended input device "Intel RealSense 3D Camera R200" (type: KEYBOARD, id 17)
[    35.192] (**) Option "xkb_model" "pc105"
[    35.192] (**) Option "xkb_layout" "de"
[    35.192] (**) Option "xkb_variant" "nodeadkeys"
[    35.192] (**) Option "xkb_options" "compose:rwin"
[    35.192] (II) event13 - (II) Intel RealSense 3D Camera R200: (II) is tagged by udev as: Keyboard
[    35.192] (II) event13 - (II) Intel RealSense 3D Camera R200: (II) device is a keyboard
[    35.192] (II) config/udev: Adding input device em28xx IR (em2884 #0) (/dev/input/event20)
[    35.192] (**) em28xx IR (em2884 #0): Applying InputClass "evdev keyboard catchall"
[    35.192] (**) em28xx IR (em2884 #0): Applying InputClass "libinput keyboard catchall"
[    35.192] (II) Using input driver 'libinput' for 'em28xx IR (em2884 #0)'
[    35.192] (**) em28xx IR (em2884 #0): always reports core events
[    35.192] (**) Option "Device" "/dev/input/event20"
[    35.192] (**) Option "_source" "server/udev"
[    35.192] (II) event20 - (II) em28xx IR (em2884 #0): (II) is tagged by udev as: Keyboard
[    35.192] (II) event20 - (II) em28xx IR (em2884 #0): (II) device is a keyboard
[    35.192] (II) event20 - (II) em28xx IR (em2884 #0): (II) device removed
[    35.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/0000:03:00.0/usb3/3-2/3-2.4/3-2.4.3/rc/rc0/input24/event20"
[    35.200] (II) XINPUT: Adding extended input device "em28xx IR (em2884 #0)" (type: KEYBOARD, id 18)
[    35.200] (**) Option "xkb_model" "pc105"
[    35.200] (**) Option "xkb_layout" "de"
[    35.200] (**) Option "xkb_variant" "nodeadkeys"
[    35.200] (**) Option "xkb_options" "compose:rwin"
[    35.200] (II) event20 - (II) em28xx IR (em2884 #0): (II) is tagged by udev as: Keyboard
[    35.200] (II) event20 - (II) em28xx IR (em2884 #0): (II) device is a keyboard
[    35.200] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[    35.200] (II) No input driver specified, ignoring this device.
[    35.200] (II) This device may have been added with another device file.
[    35.200] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[    35.200] (II) No input driver specified, ignoring this device.
[    35.200] (II) This device may have been added with another device file.
[    35.200] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[    35.200] (II) No input driver specified, ignoring this device.
[    35.200] (II) This device may have been added with another device file.
[    35.201] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[    35.201] (II) No input driver specified, ignoring this device.
[    35.201] (II) This device may have been added with another device file.
[    35.201] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[    35.201] (II) No input driver specified, ignoring this device.
[    35.201] (II) This device may have been added with another device file.
[    35.201] (II) config/udev: Adding input device Intel HID events (/dev/input/event11)
[    35.201] (**) Intel HID events: Applying InputClass "evdev keyboard catchall"
[    35.201] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    35.201] (II) Using input driver 'libinput' for 'Intel HID events'
[    35.201] (**) Intel HID events: always reports core events
[    35.201] (**) Option "Device" "/dev/input/event11"
[    35.201] (**) Option "_source" "server/udev"
[    35.201] (II) event11 - (II) Intel HID events: (II) is tagged by udev as: Keyboard
[    35.201] (II) event11 - (II) Intel HID events: (II) device is a keyboard
[    35.201] (II) event11 - (II) Intel HID events: (II) device removed
[    35.212] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input15/event11"
[    35.212] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 19)
[    35.212] (**) Option "xkb_model" "pc105"
[    35.212] (**) Option "xkb_layout" "de"
[    35.212] (**) Option "xkb_variant" "nodeadkeys"
[    35.212] (**) Option "xkb_options" "compose:rwin"
[    35.212] (II) event11 - (II) Intel HID events: (II) is tagged by udev as: Keyboard
[    35.212] (II) event11 - (II) Intel HID events: (II) device is a keyboard
[    35.212] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    35.212] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    35.212] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    35.212] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    35.212] (**) AT Translated Set 2 keyboard: always reports core events
[    35.212] (**) Option "Device" "/dev/input/event0"
[    35.212] (**) Option "_source" "server/udev"
[    35.212] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    35.212] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    35.212] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    35.220] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    35.220] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 20)
[    35.220] (**) Option "xkb_model" "pc105"
[    35.220] (**) Option "xkb_layout" "de"
[    35.220] (**) Option "xkb_variant" "nodeadkeys"
[    35.220] (**) Option "xkb_options" "compose:rwin"
[    35.220] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    35.220] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    35.228] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev pointer catchall"
[    35.228] (**) HOLTEK Wireless USB Device: Applying InputClass "evdev keyboard catchall"
[    35.228] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput pointer catchall"
[    35.228] (**) HOLTEK Wireless USB Device: Applying InputClass "libinput keyboard catchall"
[    35.228] (II) Using input driver 'libinput' for 'HOLTEK Wireless USB Device'
[    35.228] (**) HOLTEK Wireless USB Device: always reports core events
[    35.228] (**) Option "Device" "/dev/input/event8"
[    35.228] (**) Option "_source" "_driver/libinput"
[    35.228] (II) libinput: HOLTEK Wireless USB Device: is a virtual subdevice
[    35.228] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04D9:A01C.000A/input/input8/event8"
[    35.228] (II) XINPUT: Adding extended input device "HOLTEK Wireless USB Device" (type: KEYBOARD, id 21)
[    35.228] (**) Option "xkb_model" "pc105"
[    35.228] (**) Option "xkb_layout" "de"
[    35.228] (**) Option "xkb_variant" "nodeadkeys"
[    35.228] (**) Option "xkb_options" "compose:rwin"
[    35.228] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: Applying InputClass "evdev tablet catchall"
[    35.228] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: Applying InputClass "libinput tablet catchall"
[    35.228] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: Applying InputClass "Wacom USB tablet class"
[    35.228] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: Applying InputClass "Wacom tablet class"
[    35.228] (II) Using input driver 'wacom' for 'Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser'
[    35.229] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: always reports core events
[    35.229] (**) Option "Device" "/dev/input/event10"
[    35.229] (**) Option "Type" "eraser"
[    35.229] (--) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: maxX=34560 maxY=19440 maxZ=2047 resX=100000 resY=100000  tilt=enabled
[    35.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:056A:034E.000D/input/input12/event10"
[    35.234] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser" (type: ERASER, id 22)
[    35.234] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: (accel) keeping acceleration scheme 1
[    35.234] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: (accel) acceleration profile 0
[    35.234] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: (accel) acceleration factor: 2.000
[    35.234] (**) Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen eraser: (accel) acceleration threshold: 4
[    36.782] (II) intel(0): EDID vendor "WAC", prod id 4179
[    36.782] (II) intel(0): Using hsync ranges from config file
[    36.782] (II) intel(0): Using vrefresh ranges from config file
[    36.782] (II) intel(0): Printing DDC gathered Modelines:
[    36.782] (II) intel(0): Modeline "3840x2160"x0.0  533.25  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[    36.782] (II) intel(0): Modeline "3840x2160"x0.0  594.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (135.0 kHz e)
[    36.782] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    36.782] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    36.782] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    36.782] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    36.782] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    36.782] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    36.782] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    36.782] (II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    36.782] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    36.782] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    36.782] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    44.074] (II) intel(0): switch to mode 3840x2160@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none

Der Knackpunkt scheint also die Identifikation per ID (/dev/input/by-id) zu sein. Läßt sich da vielleicht ein anderes Verfahren einsetzen?
MfG webcys
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon doktor5000 » Nov 18th, '17, 14:34

Zeig mal bitte die Ausgaben von

Code: Alles auswählen
xsetwacom --list devices
cat /sys/module/wacom/version
modinfo wacom|grep -i version
rpm -qa|sort|grep -i wacom


Bitte noch den Inhalt der /etc/X11/xorg.conf und evtl. vorhandener Dateien in /etc/X11/xorg.conf.d posten.

Generell wirst du vermutlich einen aktuelleren Treiber brauchen von https://sourceforge.net/projects/linuxw ... put-wacom/
Ich bin nicht böse, sondern nur ehrlich. Und wer lesen kann, ist klar im Vorteil.
----
Mageia - the magic continues
Benutzeravatar
doktor5000
 
Beiträge: 5092
Registriert: Jun 2nd, '11, 09:39

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 18th, '17, 17:46

Hallo doctor5000, lange nicht gelesen, danke für Deine Antwort.

Also hier die Dateien
xsetwacom --list devices
Code: Alles auswählen
Stylus1                            id: 6   type: STYLUS   
Eraser1                            id: 7   type: ERASER   
Cursor1                            id: 8   type: CURSOR   
Pad1                               id: 9   type: PAD       
Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger touch   id: 18   type: TOUCH

cat /sys/module/wacom/version
Code: Alles auswählen
v2.00

modinfo wacom|grep -i version
Code: Alles auswählen
version:        v2.00
srcversion:     B4094FD63FE13091209EDF9

xsetwacom -V
Code: Alles auswählen
0.35.0

rpm -qa|sort|grep -i wacom
Code: Alles auswählen
lib64wacom2-0.24-1.mga6
lib64wacom-devel-0.24-1.mga6
libwacom-0.24-1.mga6
libwacom-debuginfo-0.24-1.mga6
plasma-applet-wacomtablet-3.0.0-0.beta1.3.mga6
plasma-dataengine-wacomtablet-3.0.0-0.beta1.3.mga6
wacomtablet-3.0.0-0.beta1.3.mga6
wacomtablet-debuginfo-3.0.0-0.beta1.3.mga6
wacomtablet-kcmodule-3.0.0-0.beta1.3.mga6
wacomtablet-kded-3.0.0-0.beta1.3.mga6
wacomtablet-tabletfinder-3.0.0-0.beta1.3.mga6
x11-driver-input-wacom-0.34.0-1.mga6
x11-driver-input-wacom-debuginfo-0.34.0-1.mga6
x11-driver-input-wacom-devel-0.34.0-1.mga6

xorg.conf (mageia6)
Code: Alles auswählen
# File generated by XFdrake (rev 262502)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerFlags"
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Load "v4l" # Video for Linux
EndSection

Section "InputDevice"
    Identifier "Stylus1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "stylus"
EndSection

Section "InputDevice"
    Identifier "Eraser1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "eraser"
EndSection

Section "InputDevice"
    Identifier "Cursor1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "cursor"
EndSection

Section "InputDevice"
    Identifier "Pad1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "pad"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    ModelName "MStudioPro 16"
    HorizSync 31-135
    VertRefresh 59-61
   
    # Monitor supported modeline (60.0 Hz vsync, 135.0 kHz hsync, ratio 16/9, 281 dpi)
    ModeLine "3840x2160" 594 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
   
    # Monitor preferred modeline (60.0 Hz vsync, 133.3 kHz hsync, ratio 16/9, 281 dpi)
    ModeLine "3840x2160" 533.25 3840 3888 3920 4000 2160 2163 2168 2222 -hsync +vsync
   
    # Apple iMac modes
    ModeLine "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
    ModeLine "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
    ModeLine "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
   
    # Apple monitors tend to do 832x624
    ModeLine "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
   
    # Apple PowerBook G3
    ModeLine "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
   
    # Apple TI Powerbook
    ModeLine "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
   
    # Pismo Firewire G3
    ModeLine "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
   
    # iBook2
    ModeLine "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
   
    # 17" Apple Studio Display
    ModeLine "1024x768"   112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
   
    # HiRes Apple Studio Display
    ModeLine "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
   
    # Another variation
    ModeLine "1280x1024"  134.989 1280 1317 1429 1688  1024 1025 1028 1066 +hsync +vsync
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
   
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_120"  1501.69  3840 4192 4624 5408  2160 2161 2164 2314  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_100"  1233.15  3840 4184 4616 5392  2160 2161 2164 2287  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_85"  1032.85  3840 4168 4600 5360  2160 2161 2164 2267  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_75"  903.40  3840 4168 4592 5344  2160 2161 2164 2254  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_60"  712.34  3840 4152 4576 5312  2160 2161 2164 2235  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_50"  586.61  3840 4136 4560 5280  2160 2161 2164 2222  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_120"  1040.19  3200 3488 3848 4496  1800 1801 1804 1928  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_100"  850.84  3200 3472 3832 4464  1800 1801 1804 1906  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_85"  714.19  3200 3472 3824 4448  1800 1801 1804 1889  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_75"  624.25  3200 3464 3816 4432  1800 1801 1804 1878  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_60"  491.57  3200 3448 3800 4400  1800 1801 1804 1862  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_50"  404.48  3200 3432 3784 4368  1800 1801 1804 1852  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_120"  839.95  2880 3136 3456 4032  1620 1621 1624 1736  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_100"  688.74  2880 3128 3448 4016  1620 1621 1624 1715  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_85"  578.00  2880 3120 3440 4000  1620 1621 1624 1700  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_75"  505.27  2880 3112 3432 3984  1620 1621 1624 1691  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_60"  397.41  2880 3096 3416 3952  1620 1621 1624 1676  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_50"  326.73  2880 3088 3400 3920  1620 1621 1624 1667  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_120"  660.65  2560 2776 3064 3568  1440 1441 1444 1543  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_100"  541.68  2560 2768 3056 3552  1440 1441 1444 1525  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_85"  454.45  2560 2768 3048 3536  1440 1441 1444 1512  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_75"  396.79  2560 2760 3040 3520  1440 1441 1444 1503  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_60"  311.83  2560 2744 3024 3488  1440 1441 1444 1490  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_50"  256.09  2560 2728 3008 3456  1440 1441 1444 1482  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_120"  368.76  1920 2072 2288 2656  1080 1081 1084 1157  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_100"  302.02  1920 2072 2280 2640  1080 1081 1084 1144  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_85"  252.93  1920 2064 2272 2624  1080 1081 1084 1134  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_75"  220.64  1920 2056 2264 2608  1080 1081 1084 1128  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_60"  172.80  1920 2040 2248 2576  1080 1081 1084 1118  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_50"  141.45  1920 2032 2232 2544  1080 1081 1084 1112  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_120"  255.69  1600 1728 1904 2208  900 901 904 965  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_100"  208.90  1600 1720 1896 2192  900 901 904 953  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_85"  174.79  1600 1712 1888 2176  900 901 904 945  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_75"  152.28  1600 1704 1880 2160  900 901 904 940  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_60"  119.00  1600 1696 1864 2128  900 901 904 932  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_50"  97.04  1600 1680 1848 2096  900 901 904 926  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_120"  185.67  1368 1472 1624 1880  768 769 772 823  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_100"  151.73  1368 1464 1616 1864  768 769 772 814  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_85"  125.67  1368 1456 1600 1832  768 769 772 807  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_75"  110.19  1368 1456 1600 1832  768 769 772 802  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_60"  85.86  1368 1440 1584 1800  768 769 772 795  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_50"  69.92  1368 1424 1568 1768  768 769 772 791  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_120"  182.63  1360 1456 1608 1856  765 766 769 820  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_100"  149.22  1360 1456 1600 1840  765 766 769 811  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_85"  124.65  1360 1448 1592 1824  765 766 769 804  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_75"  108.34  1360 1440 1584 1808  765 766 769 799  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_60"  84.40  1360 1424 1568 1776  765 766 769 792  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_50"  69.34  1360 1416 1560 1760  765 766 769 788  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_120"  161.56  1280 1376 1512 1744  720 721 724 772  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_100"  131.85  1280 1368 1504 1728  720 721 724 763  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_85"  110.01  1280 1360 1496 1712  720 721 724 756  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_75"  95.65  1280 1352 1488 1696  720 721 724 752  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_60"  74.48  1280 1336 1472 1664  720 721 724 746  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_50"  60.47  1280 1328 1456 1632  720 721 724 741  -HSync +Vsync
EndSection

Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "intel"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Stylus1" "SendCoreEvents"
    InputDevice "Eraser1" "SendCoreEvents"
    InputDevice "Cursor1" "SendCoreEvents"
    InputDevice "Pad1" "SendCoreEvents"
    Screen "screen1"
EndSection

Im Ordner xorg.conf.d sind bei mageia6 keine Daten enthalten.

Interessenhalber noch die xorg.conf (omv lx 3.2)
Code: Alles auswählen
# File generated by XFdrake (rev )

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerFlags"
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
EndSection

Section "InputClass"
    MatchIsKeyboard "yes"
    Option "XkbOptions" "terminate:ctrl_alt_bksp"
    Identifier "Keyboard Defaults"
EndSection

Section "Module"
    EndSection

Section "InputDevice"
    Identifier "Stylus1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "stylus"
EndSection

Section "InputDevice"
    Identifier "Eraser1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "eraser"
EndSection

Section "InputDevice"
    Identifier "Cursor1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "cursor"
EndSection

Section "InputDevice"
    Identifier "Pad1"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "pad"
EndSection

Section "InputDevice"
    Identifier "Stylus2"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "stylus"
EndSection

Section "InputDevice"
    Identifier "Eraser2"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "eraser"
EndSection

Section "InputDevice"
    Identifier "Cursor2"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "cursor"
EndSection

Section "InputDevice"
    Identifier "Pad2"
    Driver "wacom"
    Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._Wacom_MobileStudio_Pro_16_7EH0054000114-event-mouse"
    Option "Type" "pad"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    ModelName "MStudioPro 16"
    HorizSync 31-135
    VertRefresh 59-61
   
    # Monitor supported modeline (60.0 Hz vsync, 135.0 kHz hsync, ratio 16/9, 281 dpi)
    ModeLine "3840x2160" 594 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
   
    # Monitor preferred modeline (60.0 Hz vsync, 133.3 kHz hsync, ratio 16/9, 281 dpi)
    ModeLine "3840x2160" 533.25 3840 3888 3920 4000 2160 2163 2168 2222 -hsync +vsync
   
    # Apple iMac modes
    ModeLine "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
    ModeLine "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
    ModeLine "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
   
    # Apple monitors tend to do 832x624
    ModeLine "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
   
    # Apple PowerBook G3
    ModeLine "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
   
    # Apple TI Powerbook
    ModeLine "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
   
    # Pismo Firewire G3
    ModeLine "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
   
    # iBook2
    ModeLine "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
   
    # 17" Apple Studio Display
    ModeLine "1024x768"   112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
   
    # HiRes Apple Studio Display
    ModeLine "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
   
    # Another variation
    ModeLine "1280x1024"  134.989 1280 1317 1429 1688  1024 1025 1028 1066 +hsync +vsync
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
   
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_120"  1501.69  3840 4192 4624 5408  2160 2161 2164 2314  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_100"  1233.15  3840 4184 4616 5392  2160 2161 2164 2287  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_85"  1032.85  3840 4168 4600 5360  2160 2161 2164 2267  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_75"  903.40  3840 4168 4592 5344  2160 2161 2164 2254  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_60"  712.34  3840 4152 4576 5312  2160 2161 2164 2235  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3840x2160_50"  586.61  3840 4136 4560 5280  2160 2161 2164 2222  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_120"  1040.19  3200 3488 3848 4496  1800 1801 1804 1928  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_100"  850.84  3200 3472 3832 4464  1800 1801 1804 1906  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_85"  714.19  3200 3472 3824 4448  1800 1801 1804 1889  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_75"  624.25  3200 3464 3816 4432  1800 1801 1804 1878  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_60"  491.57  3200 3448 3800 4400  1800 1801 1804 1862  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "3200x1800_50"  404.48  3200 3432 3784 4368  1800 1801 1804 1852  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_120"  839.95  2880 3136 3456 4032  1620 1621 1624 1736  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_100"  688.74  2880 3128 3448 4016  1620 1621 1624 1715  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_85"  578.00  2880 3120 3440 4000  1620 1621 1624 1700  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_75"  505.27  2880 3112 3432 3984  1620 1621 1624 1691  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_60"  397.41  2880 3096 3416 3952  1620 1621 1624 1676  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2880x1620_50"  326.73  2880 3088 3400 3920  1620 1621 1624 1667  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_120"  660.65  2560 2776 3064 3568  1440 1441 1444 1543  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_100"  541.68  2560 2768 3056 3552  1440 1441 1444 1525  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_85"  454.45  2560 2768 3048 3536  1440 1441 1444 1512  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_75"  396.79  2560 2760 3040 3520  1440 1441 1444 1503  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_60"  311.83  2560 2744 3024 3488  1440 1441 1444 1490  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "2560x1440_50"  256.09  2560 2728 3008 3456  1440 1441 1444 1482  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_120"  368.76  1920 2072 2288 2656  1080 1081 1084 1157  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_100"  302.02  1920 2072 2280 2640  1080 1081 1084 1144  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_85"  252.93  1920 2064 2272 2624  1080 1081 1084 1134  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_75"  220.64  1920 2056 2264 2608  1080 1081 1084 1128  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_60"  172.80  1920 2040 2248 2576  1080 1081 1084 1118  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1920x1080_50"  141.45  1920 2032 2232 2544  1080 1081 1084 1112  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_120"  255.69  1600 1728 1904 2208  900 901 904 965  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_100"  208.90  1600 1720 1896 2192  900 901 904 953  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_85"  174.79  1600 1712 1888 2176  900 901 904 945  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_75"  152.28  1600 1704 1880 2160  900 901 904 940  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_60"  119.00  1600 1696 1864 2128  900 901 904 932  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x900_50"  97.04  1600 1680 1848 2096  900 901 904 926  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_120"  185.67  1368 1472 1624 1880  768 769 772 823  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_100"  151.73  1368 1464 1616 1864  768 769 772 814  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_85"  125.67  1368 1456 1600 1832  768 769 772 807  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_75"  110.19  1368 1456 1600 1832  768 769 772 802  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_60"  85.86  1368 1440 1584 1800  768 769 772 795  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1368x768_50"  69.92  1368 1424 1568 1768  768 769 772 791  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_120"  182.63  1360 1456 1608 1856  765 766 769 820  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_100"  149.22  1360 1456 1600 1840  765 766 769 811  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_85"  124.65  1360 1448 1592 1824  765 766 769 804  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_75"  108.34  1360 1440 1584 1808  765 766 769 799  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_60"  84.40  1360 1424 1568 1776  765 766 769 792  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1360x765_50"  69.34  1360 1416 1560 1760  765 766 769 788  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_120"  161.56  1280 1376 1512 1744  720 721 724 772  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_100"  131.85  1280 1368 1504 1728  720 721 724 763  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_85"  110.01  1280 1360 1496 1712  720 721 724 756  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_75"  95.65  1280 1352 1488 1696  720 721 724 752  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_60"  74.48  1280 1336 1472 1664  720 721 724 746  -HSync +Vsync
   
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x720_50"  60.47  1280 1328 1456 1632  720 721 724 741  -HSync +Vsync
EndSection

Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "modesetting"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Modes "3840x2160" "3200x1800" "2880x1620" "2560x1440" "1920x1080" "1600x900" "1366x768" "1360x765" "1280x720"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
    InputDevice "Stylus1" "SendCoreEvents"
    InputDevice "Eraser1" "SendCoreEvents"
    InputDevice "Cursor1" "SendCoreEvents"
    InputDevice "Pad1" "SendCoreEvents"
    InputDevice "Stylus2" "SendCoreEvents"
    InputDevice "Eraser2" "SendCoreEvents"
    InputDevice "Cursor2" "SendCoreEvents"
    InputDevice "Pad2" "SendCoreEvents"
EndSection

Hier fällt wegen den 2 IDs auf, daß das omv-Team doppelte Einträge von Stylus, Eraser & Co. anwendet. Hab ich in unser xorg.conf versucht, brachte als alleinige Maßnahme nichts. Für den omv-Weg müßt demnach für ein funktionierendes /dev/input/by-id, das diesen Output in ihrer xorg.conf erzielt – noch mehr geändert werden.

Liebe Grüße webcys
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon doktor5000 » Nov 18th, '17, 18:15

Also dir fehlt auf jeden Fall der aktuellere Kernel-Treiber, da sollte wohl eigentlich 2.00-version stehen, soweit ich das gelesen hab.

Woher stammen die Einträge in der xorg.conf ?
Ich bin nicht böse, sondern nur ehrlich. Und wer lesen kann, ist klar im Vorteil.
----
Mageia - the magic continues
Benutzeravatar
doktor5000
 
Beiträge: 5092
Registriert: Jun 2nd, '11, 09:39

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 18th, '17, 18:41

Zur 1.Frage, alles bei x86_64 aktuell, hab trotzdem nen urpmi --auto-update gemacht nur n´paar i586-Dateien, die wegen i586-wine drauf sind.
Code: Alles auswählen
adding 4 new rpms not available in existing hdlist
replacing /var/cache/urpmi/partial/synthesis.hdlist.cz with synthesis.hdlist.cz.tmp
updating /var/cache/urpmi/partial/MD5SUM
Medium »rpm« aktualisiert
Medium »Core Release« ist auf dem aktuellen Stand
Medium »Core Release Debug« ist auf dem aktuellen Stand
Medium »Core Updates« ist auf dem aktuellen Stand
Medium »Core Updates Debug« ist auf dem aktuellen Stand
Medium »Core Backports« ist auf dem aktuellen Stand
Medium »Core Backports Debug« ist auf dem aktuellen Stand
Medium »Nonfree Release« ist auf dem aktuellen Stand
Medium »Nonfree Release Debug« ist auf dem aktuellen Stand
Medium »Nonfree Updates« ist auf dem aktuellen Stand
Medium »Nonfree Updates Debug« ist auf dem aktuellen Stand
Medium »Nonfree Backports« ist auf dem aktuellen Stand
Medium »Nonfree Backports Debug« ist auf dem aktuellen Stand
Medium »Tainted Release« ist auf dem aktuellen Stand
Medium »Tainted Release Debug« ist auf dem aktuellen Stand
Medium »Tainted Updates« ist auf dem aktuellen Stand
Medium »Tainted Updates Debug« ist auf dem aktuellen Stand
Medium »Tainted Backports« ist auf dem aktuellen Stand
Medium »Tainted Backports Debug« ist auf dem aktuellen Stand
Medium »Core 32bit Release« ist auf dem aktuellen Stand
Medium »Core 32bit Updates« ist auf dem aktuellen Stand
Medium »Core 32bit Backports« ist auf dem aktuellen Stand
Medium »Nonfree 32bit Release« ist auf dem aktuellen Stand
Medium »Nonfree 32bit Updates« ist auf dem aktuellen Stand
Medium »Nonfree 32bit Backports« ist auf dem aktuellen Stand
Medium »Tainted 32bit Release« ist auf dem aktuellen Stand
Medium »Tainted 32bit Updates« ist auf dem aktuellen Stand
Medium »Tainted 32bit Backports« ist auf dem aktuellen Stand
Um die Abhängigkeiten zu erfüllen, werden die folgenden Pakete installiert:
  Paket                          Version      Release       Arch   
(Medium »Core 32bit Updates«)
  libcups2                       2.2.6        1.mga6        i586   
  libjpeg8                       1.5.1        1.1.mga6      i586   
  libopenssl-engines1.0.0        1.0.2m       1.mga6        i586   
  libopenssl1.0.0                1.0.2m       1.mga6        i586   
  libpng16_16                    1.6.34       1.mga6        i586   
  libturbojpeg0                  1.5.1        1.1.mga6      i586   
7.5KB zusätzlicher Speicherplatz werden benötigt.
1.7MB an Paketen werden geholt.
Fortfahren mit der Installation der 6 Pakete? (J/n) j


    ftp://ftp-stud.hs-esslingen.de//pub/Mirrors/Mageia/distrib/6/i586/media/core/updates/libturbojpeg0-1.5.1-1.1.mga6.i586.rpm
    ftp://ftp-stud.hs-esslingen.de//pub/Mirrors/Mageia/distrib/6/i586/media/core/updates/libcups2-2.2.6-1.mga6.i586.rpm
    ftp://ftp-stud.hs-esslingen.de//pub/Mirrors/Mageia/distrib/6/i586/media/core/updates/libopenssl1.0.0-1.0.2m-1.mga6.i586.rpm
    ftp://ftp-stud.hs-esslingen.de//pub/Mirrors/Mageia/distrib/6/i586/media/core/updates/libjpeg8-1.5.1-1.1.mga6.i586.rpm
    ftp://ftp-stud.hs-esslingen.de//pub/Mirrors/Mageia/distrib/6/i586/media/core/updates/libpng16_16-1.6.34-1.mga6.i586.rpm
    ftp://ftp-stud.hs-esslingen.de//pub/Mirrors/Mageia/distrib/6/i586/media/core/updates/libopenssl-engines1.0.0-1.0.2m-1.mga6.i586.rpm
libturbojpeg0-1.5.1-1.1.mga6.i586.rpm libcups2-2.2.6-1.mga6.i586.rpm libopenssl1.0.0-1.0.2m-1.mga6.i586.rpm libpng16_16-1.6.34-1.mga6.i586.rpm libjpeg8-1.5.1-1.1.mga6.i586.rpm libopenssl-engines1.0.0-1.0.2m-1.mga6.i586.rpm von /var/cache/urpmi/rpms wird installiert
Vorbereiten …                    ############################################
      1/6: libopenssl-engines1.0.0
                                 ############################################
      2/6: libopenssl1.0.0       ############################################
      3/6: libjpeg8              ############################################
      4/6: libpng16_16           ############################################
      5/6: libcups2              ############################################
      6/6: libturbojpeg0         ############################################
      1/6: libopenssl-engines1.0.0-1.0.2l-1.mga6.i586 wird entfernt
                                 ############################################
      2/6: libopenssl1.0.0-1.0.2l-1.mga6.i586 wird entfernt
                                 ############################################
      3/6: libjpeg8-1:1.5.1-1.mga6.i586 wird entfernt
                                 ############################################
      4/6: libpng16_16-2:1.6.29-1.mga6.i586 wird entfernt
                                 ############################################
      5/6: libcups2-2.2.4-1.mga6.i586 wird entfernt
                                 ############################################
      6/6: libturbojpeg0-1:1.5.1-1.mga6.i586 wird entfernt
                                 ############################################
writing /var/lib/rpm/installed-through-deps.list

Zur 2.Frage, sowohl mageia & omv
Code: Alles auswählen
File generated by XFdrake
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 18th, '17, 18:49

x11-driver-input-wacom-0.34.0-1.mga6 ist der aktuellste Treiber bei mageia.
Nachtrag rpm -qa|sort|grep -i kernel
Code: Alles auswählen
kernel-desktop-4.9.50-1.mga6-1-1.mga6
kernel-desktop-4.9.56-1.mga6-1-1.mga6
kernel-desktop-devel-4.9.50-1.mga6-1-1.mga6
kernel-desktop-devel-4.9.56-1.mga6-1-1.mga6
kernel-desktop-devel-latest-4.9.56-1.mga6
kernel-desktop-latest-4.9.56-1.mga6
kernel-firmware-20170531-1.mga6
kernel-firmware-nonfree-20170531-1.mga6.nonfree
kernel-source-4.9.50-1.mga6-1-1.mga6
kernel-source-4.9.56-1.mga6-1-1.mga6
kernel-source-latest-4.9.56-1.mga6
kernel-userspace-headers-4.9.56-1.mga6
vboxadditions-kernel-4.9.56-desktop-1.mga6-5.1.30-1.mga6
vboxadditions-kernel-desktop-latest-5.1.30-1.mga6
virtualbox-kernel-4.9.56-desktop-1.mga6-5.1.30-1.mga6
virtualbox-kernel-desktop-latest-5.1.30-1.mga6
xtables-addons-kernel-4.9.56-desktop-1.mga6-2.12-46.mga6
xtables-addons-kernel-desktop-latest-2.12-46.mga6

und evemu-record könnt nützlich sein
Code: Alles auswählen
Available devices:
/dev/input/event0:   AT Translated Set 2 keyboard
/dev/input/event1:   Sleep Button
/dev/input/event2:   Power Button
/dev/input/event3:   Lid Switch
/dev/input/event4:   Power Button
/dev/input/event5:   Video Bus
/dev/input/event6:   Video Bus
/dev/input/event7:   HOLTEK Wireless USB Device
/dev/input/event8:   HOLTEK Wireless USB Device
/dev/input/event9:   Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Touch Finger
/dev/input/event10:   Wacom Co.,Ltd. Wacom MobileStudio Pro 16 Pen
/dev/input/event11:   Intel HID events
/dev/input/event12:   Intel RealSense 3D Camera R200
/dev/input/event13:   Intel RealSense 3D Camera R200
/dev/input/event14:   USB Camera
/dev/input/event15:   HDA Intel PCH Mic
/dev/input/event16:   HDA Intel PCH Front Headphone
/dev/input/event17:   HDA Intel PCH HDMI/DP,pcm=3
/dev/input/event18:   HDA Intel PCH HDMI/DP,pcm=7
/dev/input/event19:   HDA Intel PCH HDMI/DP,pcm=8
/dev/input/event20:   em28xx IR (em2884 #0)

Hier ist zu sehen, daß /dev/input alles richtig erkennt: event 9 & 10 aber unsere Xorg wird nicht per events sondern per ID generiert.

P.S. Oder hab ich was falsch verstanden, welcher Kernel-Treiber ist gemeint ?
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 18th, '17, 22:22

Hab im cooker/cauldron das neuere (x11-driver-input-wacom) mageia7-Paket gesehen und auf dieses, einschließlich einigen neueren wacom-libs (lib64wacom2, lib64wacom-devel und libwacom) aktualisiert.
rpm -qa|sort|grep -i wacom
Code: Alles auswählen
lib64wacom2-0.26-1.mga7
lib64wacom-devel-0.26-1.mga7
libwacom-0.26-1.mga7
libwacom-debuginfo-0.24-1.mga6
plasma-applet-wacomtablet-3.0.0-0.beta1.3.mga6
plasma-dataengine-wacomtablet-3.0.0-0.beta1.3.mga6
wacomtablet-3.0.0-0.beta1.3.mga6
wacomtablet-debuginfo-3.0.0-0.beta1.3.mga6
wacomtablet-kcmodule-3.0.0-0.beta1.3.mga6
wacomtablet-kded-3.0.0-0.beta1.3.mga6
wacomtablet-tabletfinder-3.0.0-0.beta1.3.mga6
x11-driver-input-wacom-0.35.0-1.mga7
x11-driver-input-wacom-debuginfo-0.34.0-1.mga6
x11-driver-input-wacom-devel-0.35.0-1.mga7

Brachte nichts – Stylus, Eraser & co funktionieren leider immer noch nicht.
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon doktor5000 » Nov 19th, '17, 11:02

Ich würde vorschlagen erstmal die xorg.conf wegzusichern und alle wacom-Einträge zu entfernen und mit der automatischen Erkennung zu probieren.
Ich bin nicht böse, sondern nur ehrlich. Und wer lesen kann, ist klar im Vorteil.
----
Mageia - the magic continues
Benutzeravatar
doktor5000
 
Beiträge: 5092
Registriert: Jun 2nd, '11, 09:39

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon webcys » Nov 21st, '17, 20:11

Ja lieber doc5000, hab i gmacht.
Nach dem herauslöschen der wacom-Einträge aus der xorg.conf und anschließendem X-Neustart bzw. & dann noch einem kompletten Neustart, passierte nichts neues: Fingertouch ging, aber Stylus-/EraserPen sowie Curser- und PadTasten funktionieren weiterhin nicht. Und mit einem XFdrake sind die wacom-Einträge generiert in die xorg.conf (exakt gleich mit "Komma & Strich") wieder zurückgekeht.
LG webcys
webcys
 
Beiträge: 7
Registriert: Nov 12th, '17, 01:05

Re: Wacom MobileStudio Pro auf mageia 6

Beitragvon zaitian » Mär 6th, '19, 11:52

Ich habe lange für die Fotonachbearbeitung überlegt ob ich ein Wacom oder XP-Pen kaufe. Wer nicht gerade einen tragbaren 2kg Klotz braucht sollte ruhig mal hier https://www.xp-pen.de/goods/show/id/400.html reinschauen. Für die $ 439 bin ich bisher mit dem Drawing Tablet Monitor sehr zufrieden.

könnte mal einen Vergleich zwischen XP-Pen Artist 15.6 Pro und Wacom MobileStudio Pro 16 anstellen. Klar, MobileStudio Pro 16 wird sicher in einigen Punkten etwas besser sein, für mich als nicht beruflichen Nutzer gewinnt aber klar Huion bei Preisleistung. MobileStudio Pro 16 ist einfach teuer ohne für mich erkennbaren Mehrwert.
zaitian
 
Beiträge: 1
Registriert: Mär 6th, '19, 11:45


Zurück zu Erweiterter Support

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast

cron